Ti：LiNbO3光波导导模的场分布

给出了Ti扩散LiNbO_3条波导任意阶导模场分布的试探解.通过变分法分析,不但可以合理地确定其中的待定参数,而且也得到了相应导模传播常数的近似值.与扩展的有效折射率方法比较:这种解不但在函数形式上简单,待定常数确定方便,而且具有精度高的优点.还可以得到等效一维波导折射率分布的解析表达式.     

Ti扩散铌酸锂光波导特性的热固定技术

在Ti扩散铌酸锂光波导中,因光致折变效应而导致光波导特性漂移.在光波相干性的导波光学器件中,光致折变效应的影响尤为严重.本文报道了稳定光致折变效应的热固定技术实验结果;并提出在光波导特性的热固定过程中,不是H~+离子起主导作用这一看法.     

矩形截面多量子阱脊形波导模式特性

本文根据多量子阱双折射率的性质,运用有效折射率法分析了矩形截面多量子阱脊形波导E_mn^x模和模E_mn^y的模式特性。     

Broadband arrayed waveguide gratings on InP

Broadband arrayed waveguide gratings on InP are presented using a novel S-shape design. This design was utilized to accommodate the large free spectral range required for broadband operation. Four and eight channel AWGs with a wavelength channel spacing of 18 nm are discussed. The output peaks of the AWGs have a wide FWHM of 11 nm which provides insensitive operation to polarization, temperature fluctuations, and chromatic dispersion.     

Bimetallic Silver-Gold Film Waveguide Surface Plasmon Resonance Sensor

It is desirable that a surface plasmon resonance (SPR) sensor is highly sensitive to binding interactions within the sensing region, generate evanescent fields with long penetration depths, and utilize a metal film that is very stable even in extreme environmental conditions. In this study, we present the first example of a wavelength-modulated waveguide SPR sensor with a bimetallic silver-gold film for surface plasmon excitation. The underlying silver yields better evanescent field enhancement of the sensing surface, while the overlying gold ensures that the stability of the metallic film is not compromised. It is shown experimentally that in terms of dλ/dn, the bimetallic film waveguide SPR configuration has a sensitivity of 1232 nm/RIU, greater than two times improvement from the 594 nm/RIU achievable with single gold film waveguide SPR sensor. The higher sensitivity, compact nature, and better evanescent field enhancement of this configuration provides the potential to biosensing applications.     

Temperature dependence of low loss polymeric AWG

We investigate on the variation of loss and temperature dependence of a polymeric arrayed waveguide grating (AWG) depending on its substrate, by fabricating 16-channel polymeric AWGs with various substrate conditions. Insertion loss for a polymeric AWG on a silicon substrate is measured as low as 3.1 dB. The temperature-dependent wavelength shift for a polymeric AWG detached from the substrate is maintained within 0.1 nm from 20 to 80 °C. But we observe a degradation of insertion loss and a little instability in wavelength characteristics both for the detached polymeric AWG and for a polymeric AWG on a polymer substrate. We investigate on those optical properties of the polymeric AWGs based on measured thermal expansion properties of the polymers.     

制备多模聚硅氧烷光波导关键技术的改进

本文利用浇铸法,使用M&N胶和OE6450两种聚硅氧烷制备光波导.通过改进制备光波导的多个关键技术, 解决了波导制备过程中的气泡问题、脱模问题、芯层不固化问题、芯层和覆盖层产生化学反应等难题,提出了 比较完备和科学的聚硅氧烷波导制备工艺流程,从而使得波导的制备成品率从原来低于40%提高到高于80%, 波导的最大长度从原来的21 cm增加到22.5 cm,波导的损耗(截断法测量结果)从最初的0.3dB/cm(850 nm)降低到了 0.21dB/cm(850nm).本文在波导制备技术方面具有重要的实际意义和价值.     

Theoretical expression for change of extraordinary refractive index in annealed proton exchanged LiNbO3 optical waveguides

A general expression for the change in extraordinary refractive index of the annealed proton exchanged LiNbO₃ waveguide has been deduced. The expression deduced explains the experimental results of decrease in change of extraordinary refractive index with annealing. The effect of annealing time has also been incorporated following Cao's model (Cao, Ramaswamy, Srivastava, J. Lightwave Technol. 10 (1992) 1302–1313). The concentration profile of protons in the annealed waveguide has been deduced theoretically, which is consistent with the previous results. The spontaneous polarization has been considered as the central mechanism for change in extraordinary refractive index due to proton exchange with annealing.     

Magnetically controllable resonance splitting in a unidirectional waveguide system with coupled cavities

A resonance splitting effect is investigated in a system composed of two cavities coupled by two unidirectional waveguides. Both theoretical analysis and numerical calculations demonstrate that the resonance splitting (indicating a coupling between the cavities) is independent of the phase shift between the cavities, which is in contrast to previous research where reciprocal waveguides are used. Moreover, this splitting can be tunable by an external magnetic field. Our findings offer a possibility to realize effective coupling between remote on‐chip resonators, which is highly demanded in the next‐generation photonic circuits.

     

Fibre gratings and devices for sensors and lasers

Although mainstream grating writing, more often than not using single photon excitation of germanosilicate based defects with CW 244 nm light, remains the key technology for complex devices it is now being complemented by a whole host of processes which can enhance and tailor the properties of both conventional and not‐so‐conventional fibre Bragg gratings. Further, processes for writing of gratings in non‐germanosilicate fibres have also continued to develop and include multi‐photon excitation directly into the band edge of the glass. It is now possible to custom tailor a gratings property based on the application and the nature of production as well as custom tailor the grating writing process to suit the type of fibre and application. Examples and suggestions where these can benefit sensors and lasers are outlined.