Electric field assisted annealing effects on microstructure and ionic conductivity in ceria/YSZ oxide heterostructures

The effect of electric field assisted annealing on the microstructure, composition and ionic conductivity properties in CeO₂/YSZ oxide heterostructures have been investigated using molecular dynamics simulations. Amorphization–recrystallization steps were performed with and without external electric field of strength 10?MV/cm along three different orientations: in-plane (YZ), normal (X) and 45° resultant (XY) with respect to the oxide heterointerfaces. The microstructural and compositional differences at the interfaces and in the interior of the oxide heterolayers were evaluated and were found to show a clear correlation with the orientations of the applied field. In particular, the XY configuration displayed a compressive lattice strain of ～9% along with a reduced oxygen vacancy concentration when compared to the others. Ionic density profiles suggest pronounced segregation (～60% higher compared to the average value in the interior) of yttrium ions closer to the YSZ/CeO₂ interface for the XY configuration. Other configurations exhibit minimal to no such variations. These microstructural differences are found to affect the number of mobile charge carriers and the activation barriers associated with ionic migration through the oxide lattice and consequently, influence the ionic conductivity.     

Nanoscratch-induced deformation behaviour in B4C particle reinforced ultrafine grained Al alloy composites: a novel diagnostic approach

We report on the novel application of nanoscratch characterization to provide insight into the plasticity mechanisms responsible for the behaviour of composites. Accordingly, we conduct deformation characterization with nanoscratch testing (DCNT) to study the deformation behaviour of two B₄C reinforced ultrafine grained Al alloy tri-modal composites with average B₄C particle sizes of ~1–6?μm and ~500?nm, respectively. To highlight the type of mechanistic information revealed in a DCNT study of composites, we concentrate on the influence of B₄C particle size on deformation mechanisms.     

Which stresses affect the glide of screw dislocations in bcc metals?

By direct application of stress in molecular statics calculations we identify the stress components that affect the glide of 1/2?111? screw dislocations in bcc tungsten. These results prove that the hydrostatic stress and the normal stress parallel to the dislocation line do not play any role in the dislocation glide. Therefore, the Peierls stress of the dislocation cannot depend directly on the remaining two normal stresses that are perpendicular to the dislocation but, instead, on their combination that causes an equibiaxial tension-compression (and thus shear) in the plane perpendicular to the dislocation line. The Peierls stress of 1/2?111? screw dislocations then depends only on the orientation of the plane in which the shear stress parallel to the Burgers vector is applied and on the magnitude and orientation of the shear stress perpendicular to the slip direction.     

Recent Developments in Flow Injection/Sequential Injection Liquid-Liquid Extraction for Atomic Spectrometric Determination of Metals and Metalloids

Abstract

This review aims to provide a critical overview of automated flow injection and sequential injection liquid-liquid extraction for preconcentration and/or separation of ultra-trace metal and metalloid species hyphenated with atomic spectrometric detection systems, including some new trends and applications in the subbranches of cloud point extraction (CPE), wetting film extraction (WFE), supported liquid membrane extraction (SLME), extraction chromatography (EChr), and liquid-phase microextraction (LPME) techniques. The analytical performance of flow-injection/sequential injection liquid-liquid extraction methods is markedly affected by the components of the flow network such as segmentor, extraction coil, and phase separator. Thus, an overall presentation of system components along with some novel strategies for interface with atomic spectrometers is discussed and exemplified with selected applications.     

Using a pseudo-functionally graded interlayer in order to improve the static and dynamic behavior of wind turbine blade T-bolt root joints

The large wind turbines blades with multi-ton composite structures are mostly connected to the peach-bearings flanges using T-bolt joints which induce shear and bearing stress fields around the cross bolts. The significant differences between the modulus of elasticity of metallic bolts and composite surrounding materials cause stress concentration around interfaced zones and, also, limit the load capacity of the joints. In the present research, a pseudo functionally graded material (PFGM) as an interlayer is used around the cross bolts to examine the reduction of the stress concentration. Some radial variation of the mechanical properties would be considered for this interlayer. The finite element method is used to analyze the structures. Loadings are applied to the center of the cross bolts analogous to the real cases. Both the static and dynamic loadings are studied. For the finite element of the functionally graded material interlayer, a multilayer alternative material with constant properties in each layer is used. The results show that using an isotropic single layer with an average modulus of elasticity and specific thickness decreases the stress concentration of the composite part up to 47%. The various property models for the interlayer also show that an appropriated model can decrease the stress concentration up to 55%. Dynamic transient analyses would be implemented over the joint structure and improved considering to the practical cases. Using the PFGM interlayer decreases the constant and variable parts of the stresses up to 55% and also causes significant increasing of the joint fatigue life.     

Ultrasonic evidence for short-range charge-ordering state in the low-doping regime of La1– x Sr x FeO3 (1/3 ≤ x ≤ 0.45)

The longitudinal ultrasonic velocity (V) and attenuation at a frequency of 10?MHz, as well as magnetization and resistivity, have been measured in the single-phase polycrystalline La_{1– x} Sr _x FeO₃ (x?=?1/3, 0.4, 0.45). Upon cooling down from high temperature, a slight softening in V and dramatic stiffening are observed in all samples, and this stiffening is coincided with a big attenuation peak. The relative increase of V is proportional to the Sr concentration, which implies that this anomaly is strongly correlated with Fe⁴⁺. However, no obvious changes in magnetic and electric properties are found at this temperature range. The analysis suggests that this feature may be caused by the Jahn–Teller effect of Fe⁴⁺ and correspond to the formation of short-range charge-ordering state.     

On the formation of a phase with tenfold symmetry in amorphous Ni–Zr alloys

The magnetic anisotropy energy (MAE) of 3d transition-metal wires, stripes, and films is calculated self-consistently as a function of stripe width and film thickness. The magnetization-reorientation transitions in stripes are determined along the crossover from the mono-atomic one-dimensional chain to the two-dimensional monolayer. It is shown that the MAE oscillates as a function of stripe width and depends strongly on the considered transition metal. The reorientation transitions in Co films deposited on a highly polarizable substrate such as Pd are discussed. A local analysis of the layer-resolved MAEs provides new insights into the off-plane magnetization observed in Pd-capped Co films on Pd(111). The interfaces responsible for the stability of the off-plane easy axis are characterized microscopically. An unexpected internal magnetic structure of the Co–Pd interfaces is revealed in which the magnetic moments and spin–orbit interactions at Pd atoms play a crucial role. The nature of the reorientation transition from perpendicular to in-plane magnetization with increasing film thickness is studied by means of full-vectorial calculations. The existence of a spin-canted phase at intermediate film thickness is demonstrated.     

Mixed alkali metal selenate proton conductors: Phase transitions and crystal structure of [Rb0.54(Nh4)0.46]3H(SeO4)2

Optical birefringence, calorimetric, thermal expansion, powder and single crystal X-ray diffraction investigations of mixed proton conductors [Rb_1-x(NH₄)_x]₃H(SeO₄)₂ were performed with the aim of studying the influence of partial substitution of cations on the superprotonic phase transition, on the atomic structure and on other characteristic features of this type of crystals.     

应用多核固体核磁共振光谱与量子化学计算的方法研究层状的过渡金属硫化物

层状的过渡金属硫化物及其衍生物在许多领域内有着广泛的应用前景. 具体应用包括催化、陶瓷、润滑、能量储存、半导体、电子与光学器件. 该文报道了作者最近用固体核磁共振光谱的方法来表征几种有代表性的过渡金属硫化物(MS₂: M=Zr, Ti, W, Mo和Ta)的结果. 并在不同的磁场强度下（21.1、14.1、9.4 T）成功地获取了³³S, ^47/49Ti,⁹¹Zr,⁹5Mo 在天然丰度下的固体核磁共振光谱. 为了帮助解释实验结果,同时还进行了量子化学计算. 实验及理论计算的结果都表明³³S, ^47/49Ti, ⁹¹Zr, ⁹⁵Mo 的固体核磁共振参数对于这些核的局部几何与电子环境非常敏感.     

过渡金属Co2+离子掺杂ZnS硫化物纳米晶制备与中红外发光特性研究

利用不含有机相的简单水热法制备了Co^2+∶ZnS纳米晶,纳米晶具有立方闪锌矿结构,平均晶粒尺寸约为8.3 nm,在808 nm激光泵浦下具有2~5μm波段的中红外荧光发射,中心波长位于3400 nm和4700 nm,分别对应Co^2+离子的4T2(F)→4 A 1(F)和4T1(F)→4T2(F)的能级跃迁.进一步将制备的纳米晶在还原气氛下进行800℃热处理,获得立方闪锌矿和纤锌矿混合晶型的纳米晶,平均晶粒尺寸增大到22.5 nm左右,热处理后的纳米晶表面羟基含量更低,中红外荧光发射强度显著提高.该Co^2+∶ZnS纳米晶的制备方法简单、在制备过程中不引入有机相等荧光淬灭中心,同时证明通过后热处理过程可以进一步减少表面缺陷及羟基含量,使荧光强度得到大幅提升.