Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

Abstract

A novel and simple two-frequency Brillouin fiber laser is presented. It is based on a fiber Fabry-Perot cavity with fiber Bragg gratings as reflectors. The model of stimulated Brillouin scattering in fiber grating–based Fabry-Perot resonator is investigated. The laser allows conversion efficiency of close to 100% and suppresses the higher-order Stokes waves. The theoretical prediction is presented and the experimental demonstration is realized.     

Bifurcation Instability of sheet metal during spring-back

In automotive and home appliance industries, there are many complex-shaped sheet metal components which need to be fabricated in multiple stamping operations. For example, the manufacturing of an outer case of washing machine consists of stamping followed by a bending operation. After the first stage of the stamping process, a large amount of spring-back takes place, and therefore, it is difficult to proceed to the next stage of the bending process. In the stamping process of that kind of sheet component with low geometric constraint, the forming area is large compared to the forming depth. Therefore, the formed part is in an unstable state and is less geometrically constrained, which causes a large amount of spring-back. To investigate this phenomenon, finite element analyses are carried out. During a spring-back analysis after forming, bifurcation takes place and the finite element solution procedure using the Newton–Raphson scheme becomes unstable. To get a stable post-bifurcation solution, a bifurcation algorithm is introduced at the bifurcation point. The deformed shapes obtained from finite element analyses are in good agreement with the experimental data. From this study, it is shown that the bifurcation behaviour enlarges the spring-back and the degree of dimensional error. To obtain additional possible post-bifurcation solutions, non-bifurcation analyses using initial guesses obtained in a modal analysis are carried. For the initial guesses, lowed four eigenmodes are utilized. Finally, the post-bifurcation behaviour and spring-back amount are investigated for various process parameters including the forming depth, punch width and corner radius.     

Tunable wavelength filters using polymer long-period waveguide gratings based on metal-cladding directly defined technique

In this work, long-period waveguide grating-based tunable wavelength filters using organic–inorganic grafting poly(methyl methacrylate)(PMMA) materials are designed and fabricated by metal-cladding directly defined technique.The thermal stabilities and optical properties of the organic–inorganic grafting PMMA core materials are analyzed. Structures and performance parameters of the waveguide gratings and self-electrode heaters are designed and simulated. The contrast of the filter is about 15 d B and the resonant wavelength can be tuned by different electric powers applied to the metal-cladding self-electrode heaters. The temperature sensitivity is 3.5 nm/℃ and the switching time is about 1 ms. The technique is very suitable for realizing the optoelectronic integrated wavelength-division-multiplexing systems.     

啁啾相移光纤光栅分布式应变与应变点精确定位传感研究

利用啁啾相移光纤光栅狭缝的中心波长对应变点和应变量的波长敏感性,实现应变与应变点精确定位的传感.当啁啾光纤光栅上的某一位置产生微应变时,该应变点会产生相移,其频谱则会出现一个与之对应的狭缝,且狭缝的深度和中心波长与应变的大小和位置相关.当串接不同中心波长的啁啾光纤光栅后,即可实现一定范围内的分布式应变与应变点精确定位检测.本文通过V-I传输矩阵法建立了狭缝深度和中心波长关于应变量和应变位置的理论模型,分析结果表明理论上可以实现微米量级的精确定位.搭建了级联啁啾相移光纤光栅的分布式应变传感装置,实验获得的最大应变灵敏度为0.19 pm/με.该精确定位传感装置在先进制造、精密加工、航空航天、铁路系统等高新技术领域具有重要的应用前景.     

Coulomb‐enhanced spin–orbit coupling and semiconductor to half‐metal transition under pressure in Sr2CrReO6

Ordered Sr₂CrReO₆ has been synthesized recently. It is measured to be ferrimagnetic semiconductor, in contrary to the previous reports of metallic properties. To solve the discrepancy, we have investigated the compound by using the density functional theory. The semiconducting behavior is reproduced by including the electron correlation and spin–orbit coupling simultaneously. The calculated band gap is 0.22 eV, close to the experimental value of 0.21 eV. A large orbital moment of 0.69µ_B is found for Re, which is caused by the Coulomb‐enhanced spin–orbit coupling. By applying pressure, a semiconductor to half‐metal transition is observed through 5% volume compression.

     

Soft X‐ray absorption spectroscopy and resonant inelastic X‐ray scattering spectroscopy below 100 eV: probing first‐row transition‐metal M‐edges in chemical complexes

X‐ray absorption and scattering spectroscopies involving the 3d transition‐metal K‐ and L‐edges have a long history in studying inorganic and bioinorganic molecules. However, there have been very few studies using the M‐edges, which are below 100 eV. Synchrotron‐based X‐ray sources can have higher energy resolution at M‐edges. M‐edge X‐ray absorption spectroscopy (XAS) and resonant inelastic X‐ray scattering (RIXS) could therefore provide complementary information to K‐ and L‐edge spectroscopies. In this study, M_2,3‐edge XAS on several Co, Ni and Cu complexes are measured and their spectral information, such as chemical shifts and covalency effects, are analyzed and discussed. In addition, M_2,3‐edge RIXS on NiO, NiF₂ and two other covalent complexes have been performed and different d–d transition patterns have been observed. Although still preliminary, this work on 3d metal complexes demonstrates the potential to use M‐edge XAS and RIXS on more complicated 3d metal complexes in the future. The potential for using high‐sensitivity and high‐resolution superconducting tunnel junction X‐ray detectors below 100 eV is also illustrated and discussed.     

Preparation and surface modification of silicon nanowires under normal conditions

Preparation and surface modification of silicon nanowires (SiNWs) grown by the metal catalyzed solution method under normal conditions (room temperature, 1 atm) had been studied in this paper. Firstly, SiNWs using a simple solution method via electroless metal deposition (EMD) of silver under room temperature, standard pressure had been prepared. The influence of the growth parameters such as solution concentration, etching time on the SiNWs formation had been studied. Secondly, the surface modification of SiNWs with platinum and copper had been investigated. The results indicated that the SiNWs modified with Pt and Cu showed different surface morphologies. Pt modification on SiNWs presented in the form of nanoparticles, whereas Cu modification in the form of membrane. Therefore, the Pt modified SiNWs have more vast surface-to-bulk ratio than the unmodified ones, and SiNWs modified with copper nanoparticles will lead to the smaller surface-to-bulk ratio. So the platinum-modified SiNWs have a promising application in sensors’ field.     

THz振荡器双光栅开放腔的高频特性

针对双开槽的双光栅开放式谐振腔,提出了一种基于矩形波导谐振腔理论的计算方法,给出TE04模式场分布的结构设计修正公式,用于进行准光学谐振腔结构设计优化,通过增强电子注区域的电场强度,可有效提高电子效率。同时对双光栅慢波结构"冷"色散特性进行了计算,分析了不同参数对其高频特性的影响。结果表明,双光栅槽宽和电子注通道宽度的变化会对其色散特性的频带上限产生较大影响。     

重金属铅离子胁迫下玉米叶片光谱弱差信息的DSAT甄别模型

光谱间微弱信息测度是当今高光谱遥感研究难点之一,传统光谱测度方法难以区分光谱信息的微弱差异。研究设计了不同浓度的铅(Pb)污染实验,并测量了不同浓度铅离子(Pb2+)胁迫下玉米叶片的高光谱反射率、叶绿素含量及Pb2+含量,但是从所测结果得出,不同浓度Pb2+胁迫下的光谱相似性相关系数均达到0.999,难以区分不同浓度Pb2+胁迫引发的光谱间微弱信息差异和污染程度。针对这一情况,基于光谱微分处理、正切函数增强、光谱角量度与波谱分段检测等,提出了一种新型的相似光谱测度方法,即微分光谱角正切(derivative spectral angle tangent,DSAT)法。为了验证DSAT在区分相关系数达0.99以上相似光谱的可行性和有效性,将DSAT用于不同浓度Pb2+胁迫玉米叶片的整体波形与光谱区间子波形的信息差异性度量与检测。实验结果得到,波形差异信息与玉米叶片中叶绿素相对浓度与Pb2+含量显著相关。进而也证明DSAT法在甄别较高相似性光谱间差异上具有更好的实用性和优越性。