Substituent Effects on the C-C Bond Strength, 15[1] Geminal Substituent Effects, 7[2]. Thermochemistry and Thermal Decomposition of Alkyl-substituted Tricyanomethyl Compounds

The thermolysis reactions of the tricyanomethyl compounds 10a-c were studied in solution. 2,2-Dicyano-3-methyl-3-phenylbutyronitrile ( 10a ) and 2,2-dicyano-3-methyl-3-(4-nitrophenyl)butyronitrile ( 10b ) decomposed heterolytically into carbenium ions and (CN)₃C⁻ anions, while 9-methyl-9-(tricyanomethyl)fluorene ( 10c ) underwent about 11% homolytic C-C bond cleavage into 9-methyl-9-fluorenyl- and tricyanomethyl radicals. The rates of the homolysis were determined by a radical scavenger procedure under conditions of pseudozero order kinetics. From the temperature effect on the rate constants the activation parameters were determined [ΔH ( 10c ) = 155· 2 kJ mol⁻¹, ΔS ( 10c ) = 58· 5 J mol⁻¹ K⁻¹]. Standard enthalpies of formation ΔH (g) were determined for 2,2-dicyanopropionitrile ( 2 ) (422.45 kJ mol⁻¹), 2,2-dicyanohexanenitrile ( 3 ) (349.74 kJ mol⁻¹), 2,2-dicyano-3-phenylpropionitrile ( 4 ) (540.75 kJ mol⁻¹), 2-butyl-2-methylhexanentrile ( 5 ) (-133.20 kJ mol⁻¹), 2,2-dimethylpentanenitrile ( 6 ) (-45.78 kJ mol⁻¹), and 2-methylbutyronitrile ( 7 ) (2.44 kJ mol⁻¹) from the enthalpies of combustion and enthalpies of sublimation/vaporization. From these data and known Δ (g) values for alkanenitriles and -dinitriles, thermochemical increments for ΔH (g) were derived for alkyl groups with one, two, or three cyano groups attached. The comparison of these increments with those of alkanes reveals a strong geminal destabilization, which is interpreted by dipolar repulsions between the cyano groups. - From ΔH (g) of 10c and ΔH of its homolytic decomposition the radical stabilization enthalpy for the tricyanomethyl radical 1 RSE ( 1 ) = -18 kJ mol⁻¹ was determined. Thus, 1 is destabilized, in comparison with the RSEs of tertiary α-cyanalkyl (23 kJ mol⁻¹) and α,α-dicyanoalkyl (27 kJ mol⁻¹) radicals, which were recalculated from bond homolysis measurements^[4] and the new thermochemical data. This change of RSE on increasing the number of α-cyano groups is discussed as the result of the additive contributions by resonance stabilization and increasing destabilization by dipolar repulsion. The amount of the dipolar energies was estimated by molecular mechanics (MM2).     

Solvent and substituent effects on the conformational equilibria and intramolecular hydrogen bonding of 4-substituted-2-hydroxybenzaldehydes

By applying the B3LYP/6-31G(d) method with the SCIPCM model on seven 4X substituted 2-hydroxybenzaldehydes, some structural characteristics related with their conformational equilibria and intramolecular hydrogen bonds have been clarified. The compounds are almost completely under the planar conformation characterized by a strong intramolecular hydrogen bond, which decreases in those solvents that possess a higher hydrogen bond donating capability and polarity. The substituents exert a marked influence on the conformational equilibrium constants and the strength of the IHB. Moreover, the excellent Hammett-type equations obtained support the proposed conformational reactions to quantify the IHB in the o-hydroxybenzaldehydes studied.     

Advances in two-dimensional GC with glass capillary columns

A versatile two-dimensional gas chromatograph is described, consisting of 2 separate ovens, one intermediate trap, an auxiliary inlet, and the necessary hardware to effect off-line switching according to the principle of Deans. The unit has been designed for use with high resolution glass capillary columns. The performance of individual instrumental components was critically evaluated. Results showed that low dead volume glass to metal connections were required in the manifold and detector lines to minimize extra-column effects. The mass of the intermediate trap must be low to allow rapid heating. Operational parameters are discussed and examples of some applications are shown.     

H-quadrupolar coupling-based analysis of stereochemical and regiochemical memory in the Pd-catalysed allylic alkylation of iso-cinnamyl type substrates employing the chiral monophosphine ligands ‘MOP’ and ‘MAP’

The reaction of iso-cinnamyl acetate with NaC(Me)(CO₂Me)₂, catalysed by Pd-‘MOP’ (MOP=2-methoxy-2′-diphenylphosphino-1,1′-binaphthalene) is known to proceed with a regiochemical memory effect that results in the predominant generation of the branched alkylation product. The analogous reaction employing ‘MAP’ as ligand (MAP=2-N,N-dimethylamino-2′-diphenylphosphino-1,1′-binaphthalene) proceeds with ‘normal’ regioselectivity to generate predominantly the linear isomer of product. A ²H-NMR based analysis, employing quadrupolar coupling in a chiral liquid crystal matrix, has been developed to facilitate the simultaneous study of the regiochemical and stereochemical outcome of the reaction of both enantiomers of iso-cinnamyl ester substrates in ²H-labelled but racemic samples. The analysis allows the comparison of relative rates of two competing isomerisation processes occurring in the π-allyl intermediates in the Pd-catalysed reaction, one of which facilitates asymmetric induction, the other resulting in loss of regiochemical memory. It is demonstrated that the two processes are partially coupled and that this then limits the attainment of high global enantiomeric excess in the branched product to reactions that proceed with low regiochemical retention. A key factor for the observation of high regiochemical memory is found to be the nucleophilicity of the malonate anion and the electrophilicity of the Pd-π-allyl intermediate with reduction in the reactivity of either partner resulting in the onset of substantial loss of memory.     

The Menshutkin Reaction in the Gas Phase and in Aqueous Solution: A Valence Bond Study

The recently developed (L. Song, W. Wu, Q. Zhang, S. Shaik, J. Phys. Chem. A 2004 , 108, 6017–6024) valence bond method coupled to a polarized continuum model (VBPCM) is applied to the Menshutkin reaction, NH₃+CH₃Cl→CH₃NH₃⁺+Cl^?, in the gas phase and in aqueous solution. The computed barriers and reaction energies at the level of the breathing orbital VB method (P. C. Hiberty, J. P. Flament, E. Noizet, Chem. Phys. Lett. 1992 , 189, 259), BOVB and VBPCM//BOVB, are comparable to CCSD(T) and CCSD(T)//PCM results and to experimental values in solution. The gas‐phase reaction is endothermic and leads to an ion‐pair complex via a late transition state. By contrast, the reaction in the aqueous phase is exothermic and leads to separate solvated ions as reaction products, via an early transition state. The VB calculations provide also the reactivity parameters needed to apply the valence bond state correlation diagram method, VBSCD (S. Shaik, A. Shurki, Angew. Chem. Int. Ed. 1999 , 38, 586). It is shown that the reactivity parameters along with their semiempirical derivations provide together a satisfactory qualitative and quantitative account of the barriers.     

Assignment of the relative configuration of spiro[4.5]decanes by 13C, 15N and 17O NMR

The relative configuration of 11 1,4-diazaspiro[4.5]decanes (1a-1j and 1m), 15 1,4-oxazaspiro[4.5]decanes (2a-2o) and 10 1,4-dioxaspiro[4.5]decanes (3a-3n) substituted at the 2-, 6-, 7- or 8-position by a methyl group or using the tert-butyl group as a model for the ananchomeric structure is reported. The relative stereochemistry was analyzed by 1H, 13C, 15N and 17O NMR and all isomers present were characterized spectroscopically. Compounds with a methyl group in the six-membered ring show a chair conformation preference with the methyl group in the equatorial position. Compounds with one or two nitrogens exhibit a tautomeric equilibrium between the imine-diazolidine forms, as demonstrated by IR and 13C NMR.     

Adsorption of organic substances on broken clay surfaces: a quantum chemical study

Hydrogen-bonded interactions between local defect structures on broken clay surfaces modeled as molecular clusters and the organic molecules acetic acid, acetate, and N-methylacetamide (NMA) have been investigated. Density functional theory and polarized basis sets have been used for the computation of optimized interaction complexes and formation energies. The activity of the defect structures has been characterized as physical or chemical in terms of the strength of the hydrogen bonds formed. Chemical defects lead to significantly enhanced interactions with stronger hydrogen bonds and larger elongation of OH bonds in comparison to the physical defects. The type of interaction with the defect structure significantly influences the planarity of the model peptide bond in NMA. Both cases, enhancement of the planarity by increase of the CN double bond character and strong deviations from planarity, are observed.     

Modelisation of the Electric Field Linear Response of an Infinite Aggregate of All-Trans Hexatriene Chains by Electrostatic Interaction Model

A classical electrostatic polarization scheme using the additive distribution procedure has been applied to determine the longitudinal polarizability of an all-trans hexatriene molecule in an infinite stretched fiber. The parameters have been derived from ab initio CPHF/6-31G calculations and the electrostatic scheme has been validated via comparison with ab initio results on small clusters. Upon packing the polarizability of all-trans hexatriene increases by 7%. This small increase results from the balance between the enhancement of the polarizability due to collinear packing and the reduction associated with lateral packing.     

Structure formation in heavy metal oxyhydrates at low rates of gel formation

Oxyhydrate gels have a hydrophilic surface, due to which they undergo destruction and secondary polymerization in aqueous media. Prolonged storage in aqueous solution gives rise to regions with selfsimilar helical ordering in gels. Structuring of this kind is also observed when synthesis is conducted under conditions that provide low gelation rates. Electromagnetic UV and visible radiation is another means to change the gel structure; it makes the oligomer species pass into the excited state, due to which one of the directions of structuring becomes dominant. This work summarizes the results of computer simulation of gel agglomerates. For oxyhydrate systems, helical ordering was found to be one of the local energy minima. The units of a macrohelix can lie at various angles relative to one another, and they can change, after absorption of energy, the helix pitch and the order of elements in the helix.