Synthesis and characterization of poly(higher‐α‐olefin)s with a nickel(α‐diimine)/methylaluminoxane catalyst system: Effect of chain running on the polymer properties

Homopolymerization of octadecene‐1 at different reaction conditions has been studied. Significant chain running can be seen at higher polymerization temperatures. Interestingly, insertion of octadecene‐1 into a sterically hindered nickel‐cation/carbon (secondary) bond is observed. The microstructure of the polymer was established using NMR spectroscopy. The effects of chain running on polymer melting, crystallization behavior, and dynamic mechanical thermal properties were studied using DSC and DMTA. The extent of chain running (i.e., 2,ω‐, 1,ω‐enchainments) decreases with an increase in the carbon number of α‐olefins. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 191–210, 2007     

From dilute to dense self-avoiding walks on hypercubic lattices

A field-theoretic representation is presented to count the number of configurations of a single self-avoiding walk on a hypercubic lattice ind dimensions with periodic boundary conditions. We evaluate the connectivity constant as a function of the fractionf of sites occupied by the polymer chain. The meanfield approximation is exact in the limit of infinite dimensions, and corrections to it in powers ofd ^–1 can be systematically evaluated. The connectivity constant and the site entropy calculated throughout second order compare well with known results in two and three dimensions. We also find that the entropy per site develops a maximum atf1–(2d)^–1. Ford=2 (d=3), this maximum occurs atf~0.80 (f~0.86) and its value is about 50% (30%) higher than the entropy per site of a Hamiltonian walk (f=1).     

自由基引发马来酸二丁酯熔融接枝低密度聚乙烯的研究

用马来酸二丁酯(DBM)为接枝单体,过氧化二枯基(DCPO)为引发剂,对低密度聚乙烯(LDPE)进行了熔融接枝功能化。样品的红外光谱表明接枝反应确已发生。通过对样品中酯基的皂化水解测定产物的接枝率,对产物进行萃取,用凝胶量间接表征产物的交联程度;用溶液的特性粘度从侧面显示样品的支化或降解情况。实验结果表明,产物的接枝率和凝胶量可以通过选择反应条件(温度、时间及反应混合物的组成)来控制;过量的DCPO是引起交联产生凝胶的主要原因;向体系中添加DMF可阻止交联反应的发生,但产物的接枝率也有所下降,以自由基机理对上述结果进行了讨论。     

Radiation effects in the transient hot-wire technique

The transient hot-wire technique is widely used for absolute measurements of the thermal conductivity and thermal diffusivity of fluids. It is well established that fluid radiation effects significantly influence these measurements, especially those for the thermal diffusivity. Corrections for radiation effects are based on the models developed and deviations of the measured data from the ideal line source model. In this paper, the effect of fluid radiation on the measurements of the thermal conductivity of n-pentane is presented. For comparison, the influence of thermal radiation effect on measurement of transparent fluids, such as argon is also shown. The difference between the influence of natural convection and thermal radiation is also demonstrated.     

Thermal decomposition kinetics of titanium hydride and Al alloy melt foaming process

Metal foams, now one of research foci, are a newclass of materials with low densities and novel physi-cal, mechanical, thermal, electrical and acoustic prop-erties[1—8]. Demands from high-tech make Al alloyfoam, which has much higher specific strength than ofpure Al foam, the new development focus[9—11]. Melt foaming process is one of the approaches tofabricate Al foam and Al alloy foam and their porestructure (pore diameter and porosity) has close rela-tionship with the thermal decompo…     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

考虑壁面滑移的Z-W流变模型及其应用

总结了聚合物熔体在剪切溶场壁面滑移研究的成果，提出了Z－W模型的物理概念。该模型考虑了界面分子链和固体壁面间解吸－吸附而发生的滑移。界面分子链和内部分子链间解缠－重新缠结而发生的表观滑移以及变形摩擦滑移。在稳态简单剪切流运过程，模型可以化简为应力和应变的二次微分方程，说明了壁面滑移来源于Cohesive滑移和Adhesive滑移两部分，对于自激振荡相关的多重内振荡和多重外振荡进行了归纳，应用统一模型定性地解释了毛细管实验中剪切应力的非线性，瞬态自激振荡、滑－粘转换和鲨鱼皮等现象，在聚合物熔体振动剪切流动（LAOS）中，统一模型可以简化为杜芬方程，通过模拟发现，该模型可解释小应变振幅下振动剪切时的线性流变行为和在大振幅振动流动中的复杂非线性行为。非线性行为与熔体粘弹性以及近壁面界面层的性质有关，统一模型在特殊情况下还可以简化Joshi模型，结构网络模型，Hatzikiriakos或等效的Graham模型，可见，Z－W模型内内涵比较丰富，适用面较广，也从一个侧面说明该模型具有相当的合理性。     

New Phase in the Bi–Sr–Ca–Cu–O System

Cooling a melt of a Bi–Sr–Ca–Cu–O system (Bi:Sr:Ca:Cu = 4:3:3:4 or 2:2:2:4) from 1000°C-1050°C yielded crystals of a new red-colored nonsuperconducting phase, accompanying the superconducting 2212 and 2201 phases. Based on the EPR spectra, it was concluded that copper is univalent in this compound. The new phase has a composition Bi_2.2Sr_1.6Ca_1.3Cu₂Ox. The X-ray diffraction pattern has been indexed, and the unit cell parameters of the phase have been determined: space group P2/m, a = 12.93, b = 4.55, c = 10.94 ; = 102.72°.     

Production of high melt strength polypropylene by gamma irradiation

High melt strength polypropylene (HMS-PP) has been recently developed and introduced in the market by the major international producers of polypropylene. Therefore, BRASKEM, the leading Brazilian PP producer, together with EMBRARAD, the leading Brazilian gamma irradiator, and the IPEN (Institute of Nuclear Energy and Research) worked to develop a national technology for the production of HMS-PP. One of the effective approaches to improve melt strength and extensibility is to add chain branches onto polypropylene backbone using gamma radiation. Branching and grafting result from the radical combinations during irradiation process. Crosslinking and main chain scission in the polymer structure are also obtained during this process. In this work, gamma irradiation technique was used to induce chemical changes in commercial polypropylene with two different monomers, Tri-allyl-isocyanurate (TAIC) and Tri-methylolpropane-trimethacrylate (TMPTMA), with concentration ranging from 1.5 to 5.0 mmol/100 g of polypropylene. These samples were irradiated with a ⁶⁰Co source at dose of 20 kGy. It used two different methods of HMS-PP processing. The crosslinking of modified polymers was studied by measuring gel content melt flow rate and rheological properties like melt strength and drawability. It was observed that the reaction method and the monomer type have influenced the properties. However, the concentration variation of monomer has no effect.     

A High-Order Finite Difference Scheme for 3D Unsteady Convection Diffusion Reaction Equations北大核心CSCD

针对三维非稳态对流扩散反应方程,构造了一种高精度紧致有限差分格式,对空间的离散采用四阶紧致差分方法,对时间的离散采用Taylor级数展开和余项修正技术,所提格式在时间上的精度为二阶、在空间上的精度为四阶。利用Fourier稳定性分析法证明了该格式是无条件稳定的。最后给出数值算例验证了理论结果。