The slowly reacting mode of combustion of gaseous mixtures in spherical vessels. Part 1: Transient analysis and explosion limits

Frank-Kamenetskii's analysis of thermal explosions is revisited, using also a single-reaction model with an Arrhenius rate having a large activation energy, to describe the transient combustion of initially cold gaseous mixtures enclosed in a spherical vessel with a constant wall temperature. The analysis shows two modes of combustion. There is a flameless slowly reacting mode for low wall temperatures or small vessel sizes, when the temperature rise resulting from the heat released by the reaction is kept small by the heat-conduction losses to the wall, so as not to change significantly the order of magnitude of the reaction rate. In the other mode, the slow reaction rates occur only in an initial ignition stage, which ends abruptly when very large reaction rates cause a temperature runaway, or thermal explosion, at a well-defined ignition time and location, thereby triggering a flame that propagates across the vessel to consume the reactant rapidly. Explosion limits are defined, in agreement with Frank-Kamenetskii's analysis, by the limiting conditions for existence of the slowly reacting mode of combustion. In this mode, a quasi-steady temperature distribution is established after a transient reaction stage with small reactant consumption. Most of the reactant is burnt, with nearly uniform mass fraction, in a subsequent long stage during which the temperature follows a quasi-steady balance between the rates of heat conduction to the wall and of chemical heat release. The changes in the explosion limits caused by the enhanced heat-transfer rates associated with buoyant motion are described in an accompanying paper.     

Hydromagnetic parametric resonance instability of two superposed conducting fluids in porous medium

Rayleigh–Taylor instability of a heavy fluid supported by a lighter one through porous medium, in the presence of a uniform, horizontal and oscillating magnetic field is studied. The fluids are taken as viscous (obeying Darcy's law), uniform, incompressible, and infinitely conducting. The amplitude of the oscillating part of the field is taken to be small compared with its steady part. The dispersion relation is obtained in the form of a third-order differential equation, with time as the independent variable and with periodic coefficients, for the vertical displacement of the surface of separation of the two fluids from its equilibrium position. The oscillatory magnetic field of frequency ω$\omega$ and steady part _H0$H_0$ has a stabilizing influence on a mode of disturbance which is unstable in a steady magnetic field of strength _H0$H_0$. It is found that the oscillatory magnetic field and porosity of the porous medium have stabilizing effects, while the medium permeability has a destabilizing influence on the considered system. For a constant value of any of these physical parameters, the system has been found to be unstable (for small wavenumbers) as well as stable afterwards after a definite wavenumber value. The marginal stability case of parametric resonance holds when _M1=_M2=0$M_1=M_2=0$ (and hence m=0$m=0$), in which the characteristic exponents, and the corresponding solutions for u$u$ break down, is also investigated in detail. It is found, to order ?$?$, that the effect of an oscillating magnetic field has no stabilizing influence on a disturbance which is marginally stable in the steady magnetic field; while to order ?²${?}^2$, and when the magnetic field oscillates, a resonance between this mode of disturbances and the oscillating field leads to instability when _ρ2>_ρ1${\rho }_2>{\rho }_1$. It is found also, in this resonant case, that all the constant or varied physical parameters, mentioned above, have destabilizing influences on the considered system. Finally, the other two resonance points appear in non-porous media (i.e., when m=±iω$m=\pm \mathrm{i}\omega$ and m=±2iω$m=\pm 2\mathrm{i}\omega$), are disappeared here due to the presence of the porous medium.     

β-二亚胺配体支持的铝胺化合物的制备及其催化ε-己内酯开环聚合的高效性能

成功合成了由β-二亚胺配体(L)支持的铝胺化合物(L)AlH(NMe2)2(L=HC(C(Me)NAr)2,Ar=2,6-iPr2C6H3)(1)。该化合物采用分步合成法进行制备,以n-BuLi与HNMe2反应生成的锂盐LiNMe2作为前驱体,进一步与(L)AlH2溶液共混通过消除LiH得到目标产物。通过核磁共振谱、元素分析、红外漫反射光谱和X射线单晶衍射确定了铝胺化合物(L)AlH(NMe2)2的组成与结构。该铝胺化合物中,金属Al中心同时形成Al-H和Al-NMe2基团,在催化ε-己内酯的开环聚合的反应中展现出了优异的催化活性。通过高效凝胶渗透色谱测定了所得聚合物的分子量和分子量分布。     

On the Nano/Micro-Mechanics of Metallic Glass

Metallic glass (MG) is amorphous and has some outstanding properties such as ultrahigh strength, superior elasticity, and excellent thermo-plasticity. However, as MG is relatively new to the metal family, the relationship between its physical properties and amorphous structure is still unclear. This article aims to provide an insightful discussion through a comprehensive review about the investigations in the past few decades on the scientific mechanisms of this class of material. The discussion of the paper will include the following key aspects: (1) the formation mechanism of an amorphous structure through glass transition, (2) the structural characterization and models, (3) the micromechanics of plastic event and shear band, and (4) the correlation between the amorphous structure and its mechanical properties.     

A Non‐Enzymatic Carbohydrate Sensor Based on Multiwalled Carbon Nanotubes Modified with Adsorbed Active Gold Particles

The voltammetric behavior of a glassy carbon electrode modified with multiwalled carbon nanotubes (MWCNTs) and Au particles was studied in alkaline medium towards the electrooxidation of some carbohydrates used as model compounds. The influence of carbohydrate concentration and scan rate on peak potentials, peak currents, etc., observed at the modified electrode was evaluated and critically discussed. The Au particles dispersed into multiwalled carbon nanotubes structures showed favorable electrocatalytic and analytical properties towards the electrooxidation of xylose and glucose molecules. Atomic force microscopy performed on the resulting modified electrode showed a well‐efficient 3D distribution of Au active particles having sharp‐edged and elongated grains along bundles of the MWCNTs. The three‐dimensional MWCNT‐Au composite structure of the catalyst act as a promoter to enhance the diffusive character of recorded currents and probably also increases the rate of the heterogeneous electron transfer of the electrooxidation process considered.     

Aluminum hypophosphite in combination with expandable graphite as a novel flame retardant system for rigid polyurethane foams

The main aim of this work was to investigate the synergistic effect of expandable graphite (EG) and aluminum hypophosphite (AHP) on the flame retardancy of rigid polyurethane foams (RPUFs). A series of flame retardant RPUF containing EG and AHP were prepared by one‐shot and free‐rise method. The flame retardant, thermal degradation, and combustion properties of RPUF hybrids were characterized through limiting oxygen index (LOI) test, vertical burning (UL‐94) test, thermogravimetric analysis and microscale combustion calorimeter. The LOI and UL‐94 results showed that the RPUF sample with 10 wt% EG and 5 wt% AHP passed UL‐94 V‐0 rating and reached a relatively high LOI value of 28.5%, which is superior over other EG/AHP ratios in RPUF at the equivalent filler loading. Microscale combustion calorimeter results revealed that the incorporation of EG and AHP into RPUF reduced the peak heat release rate and total heat release, thus decrease the fire risk of RPUF significantly. Incorporation of EG and AHP improved the thermal stability of RPUF as observed from the thermogravimetric analysis results and also enhanced the thermal resistance of char layer at high temperature from scanning electron microscopy and Raman spectroscopy. Moreover, it could be seen from thermogravimetric analysis/infrared spectrometry spectra that the addition of EG and AHP significantly decreased the combustible gaseous products such as hydrocarbons and ethers. Finally, the synergistic mechanism in flame retardancy was discussed and speculated. Copyright © 2014 John Wiley & Sons, Ltd.     

Electropolymerized coatings of poly(o‐anisidine) and poly(o‐anisidine)‐TiO2 nanocomposite on aluminum alloy 3004 by using the galvanostatic method and their corrosion protection performance

Poly(o‐anisidine) (POA) and poly(o‐anisidine)‐TiO₂ (POA‐TiO₂) nanocomposite coatings on aluminum alloy 3004 (AA3004) have been investigated by using the galvanostatic method. The electrosynthesized coatings were characterized by FT ‐ IR spectroscopy, XRD, SEM ‐ EDX and SEM. The corrosion protection performance of POA and POA‐TiO₂ nanocomposite coatings was investigated in the 3.5% NaCl solution by using potentiodynamic polarization technique and electrochemical impedance spectroscopy. The results show that the corrosion rate of the nanocomposite coatings is about 900 times lower than the bare AA3004 under optimal conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Cooling crystallization of aluminum sulfate in pure water modulated by sodium dodecylbenzenesulfonate

This study investigated the cooling crystallization of aluminum sulfate to explore the basic data for the recovery of aluminum resources from coal spoil. Cooling crystallization process of aluminum sulfate with sodium dodecylbenzenesulfonate (SDBS) was investigated experimentally. The effects of operating conditions, namely rotate speed and cooling rate on the crystal size (Median diameter, D_0.5) were studied. Based on single factor experimental results, the response surface method (RSM) with a Box–Behnken design (BBD) was used to determine the key operating conditions, from which a predictive equation was established to quantitatively describe the relationships of D_0.5 and there relative parameters. The optimum operating conditions for cooling crystallization of aluminum sulfate were as follows: rotate speed of 200–300 rpm, cooling rate of 4–5 °C /min and n (SDBS)/n (Al₂(SO₄)₃) of around 5E‐4. Molecular dynamics (MD) results reveal that SDBS decreases the diffusion coefficient (D) of Al³⁺ molecules, which inhibits nucleation and promotes crystal growth.     

Gold‐Catalyzed 1,2‐Acyloxy Migration/Intramolecular [3+2] 1,3‐Dipolar Cycloaddtion Cascade Reaction: An Efficient Strategy for Syntheses of Medium‐Sized‐Ring Ethers and Amines

A highly efficient strategy for the formation of medium‐sized‐ring ethers and amines based on a gold‐catalyzed cascade reaction, involving enynyl ester isomerization and intramolecular [3+2] cyclization, has been developed. Various multisubstituted medium‐sized‐ring unsaturated ethers and amines were obtained through this transformation. This method represents one of the relatively few transition metal catalyzed intramolecular cycloaddition reactions for medium‐sized ring synthesis.     

Carbon Dioxide as a Protecting Group: Highly Efficient and Selective Catalytic Access to Cyclic cis‐Diol Scaffolds

The efficient and highly selective formation of a wide range of (hetero)cyclic cis‐diol scaffolds using aminotriphenolate‐based metal catalysts is reported. The key intermediates are cyclic carbonates, which are obtained in high yield and with high levels of diastereo‐ and chemoselectivity from the parent oxirane precursors and carbon dioxide. Deprotection of the carbonate structures affords synthetically useful cis‐diol scaffolds with different ring sizes that incorporate various functional groups. This atom‐efficient method allows the simple construction of diol synthons using inexpensive and accessible precursors and green metal catalysts and showcases the use of CO₂ as a temporary protecting group.