Optochemical Sensor for Ammonia Based on a Lipophilized pH Indicator in a Hydrophobic Matrix

Abstract

An optical sensor for the determination of ammonia in water based on ion pairing has been investigated. A pH-sensitive dye is immobilized as an ion pair in a silicone matrix. The colour of the dye changes from yellow to blue depending on the concentration of ammonia in the sample solution. This change is reversible. The concentration of ammonia can be determined by measuring the transmittance at a given wavelength.

All measurements were performed with a dual-beam optical meter. The measurement range was from 5.9 × 10^?7 to 1 × 10^?3 M (0.01 to 17 mg/l) in 0.1 M phosphate buffer of pH 8. The detection limit was 10 μg/l. The response times at a flow rate of 2.5 ml/min were 4 min for t₉₀ and 10 min for t₁₀₀ at a change from 41.9 to 82.5 μM ammonia and 12 min for t₉₀ and 48 min for t₁₀₀ at a change from 160 to 0 μM ammonia. The operational lifetime of the ammonia sensor was limited to a period of a few days only. A continuous decrease in baseline signal and relative signal change was observed over the whole measurement. The storage stability was more than 10 months (dry). With respect to possible application of the ammonia sensor to environmental analysis, the influence of pH, typical interferences, such as amines and various detergents on the sensor response was investigated. No interference due to pH was observed in the range from pH 5 to pH 9. With methyl- and ethylamine the response was not completely reversible. The sensor was affected by cationic detergents, but not by anionic or neutral detergents.     

A study into Stille cross‐coupling reaction mediated by palladium catalysts deposited over siliceous supports bearing N‐donor groups at the surface

Mesoporous molecular sieve SBA‐15 and conventional silica gel were grafted with 3‐[2‐(diethylamino)ethylamino]propyl groups and used as supports for the preparation of deposited palladium catalysts, which were subsequently evaluated in Stille cross‐coupling reaction of aryl bromides. The highest conversions were achieved with the metal‐saturated catalyst resulting from the modified SBA‐15. Influence of various reaction parameters (solvent, additive, temperature, etc.) on the overall yield and selectivity was studied. Copyright © 2013 John Wiley & Sons, Ltd.     

The Kinetics of Reduction of Sulfoxides by the Iodide Ion in Aqueous Perchloric Acid

Abstract

The kinetics of the acid-catalyzed reactions of di-n-butyl -sulfoxide (BuSOBu), di-phenylsulfoxide (PhSOPh), and di-benzyl -sulfoxide (PhCH₂SOCH₂Ph) with iodide in a medium of HCLO₄ has been followed; the reaction orders with respect to sulfoxide and iodide have been determined and a possible mechanism discussed.     

A simple polymer electrolyte membrane system for enrichment of low-level tritium (3H) in environmental water samples

Tritium (³H) is an essential tracer of the Earth's water cycle; yet widespread adoption of tritium in hydrologic studies remains a challenge because of analytical barriers to quantification and detection of ³H by electrolytic pre-concentration. Here, we propose a simple tritium electrolytic enrichment system based on the use of solid polymer electrolyte membranes (PEMs) that can be used to enrich ³H in 250–3000?mL environmental water samples to a 10-mL final volume. The IAEA PEM-³H system reported here can produce high enrichment factors (>70-fold) and, importantly, removes some of the deterrents to conventional ³H enrichments methods, including the use of toxic electrolysis and neutralization chemicals, spike standards, a complex electrolysis apparatus that requires extensive cooling and temperature controls, and improves precision by eliminating the need for tracking recovery gravimetrics. Preliminary results with varying operating conditions show ³H enrichments to 70-fold and higher are feasible, spanning a wide range of tritium activities from 5 to 150 TU with a precision of ～4.5?%. Further work is needed to quantify inter-sample memory and to establish lower ³H detection limits. The IAEA PEM-³H system is open source, with 3-D CAD and design files made freely available for adoption and improvement by others.     

Online induction heating for determination of isotope composition of woody stem water with laser spectrometry: a methods assessment

Application of stable isotopes of water to studies of plant–soil interactions often requires a substantial preparatory step of extracting water from samples without fractionating isotopes. Online heating is an emerging approach for this need, but is relatively untested and major questions of how to best deliver standards and assess interference by organics have not been evaluated. We examined these issues in our application of measuring woody stem xylem of sagebrush using a Picarro laser spectrometer with online induction heating. We determined (1) effects of cryogenic compared to induction-heating extraction, (2) effects of delivery of standards on filter media compared to on woody stem sections, and (3) spectral interference from organic compounds for these approaches (and developed a technique to do so). Our results suggest that matching sample and standard media improves accuracy, but that isotopic values differ with the extraction method in ways that are not due to spectral interference from organics.     

Computation and conversion of brain pH values obtained with two algorithms of phosphorus magnetic resonance spectroscopy data analysis

The intracellular brain pH in phosphorus magnetic resonance spectroscopy is calculated using the chemical shift between the inorganic phosphate and phosphocreatine with the Henderson–Hasselbalch equations. Researchers use various mathematical formulas that have different parameters and get various results for the same input data as a consequence. Thus, the aim of this article was to determine the mathematical formulas that allow the conversion of the pH values obtained by the most popular analysis methods to each other. To determine the relationships between pH results and the applied mathematical formula, the pH values were calculated using two algorithms for the theoretical chemical shift values. The pH results were compared with each other using the appropriate t-tests. Mathematical formulas were designed to simplify the conversion of pH values obtained by two data analysis methods to each other. The pH values with were obtained this way did not differ significantly from the pH values calculated directly from the given formula. The computed mathematical formulas will make it possible to simplify pH conversions without knowing the chemical shift between inorganic phosphate and phosphocreatine but only basing on the final pH values obtained by one of the formulas.     

Rheological Technique as a Sensitive Method to Characterize the Chain Diffusion across the Interface between Polystyrene and Carbon Black Filled Polystyrene

The mutual diffusion process and interphase development taking place at the interface between disks of polystyrene (PS) and carbon black filled polystyrene (CB-PS) in the molten state were investigated by a small-amplitude, oscillatory shear, rheological technique. The rheological method was employed to probe the thermorheological complexity of these polymer disks. It was found that the dynamic complex shear modulus, G*(t), increased with the time of contact in two time regimes at a fixed frequency. The time of transition between the two regimes was observed to be close to the time needed for the transition from the Rouse mode to the reptation mode. The results showed that the content of the carbon black and the temperature affected the slope of the G*(t) – t curve. Scanning electron microscopy revealed the interface disappeared when the diffusion process was complete.     

Flux and fluence dependence of disorder produced during implantation of 11B in silicon

The flux and fluence dependence of disorder produced in silicon during the implantation of ¹¹B has been investigated at room temperature, -50°C. and -120°C. Implantations were carried out with 200 keV ¹¹B ions using current densities in the range from 0.06μA/cm² to 15μA/cm², and the disorder monitored by measuring the energy spectra of backscattered protons which were incident on the sample at 450 keV parallel to a (110) axis. Significant differences in the dependence of the disorder on ¹¹B flux and fluence were observed between the implantations performed at room temperature and those carried out at the two lower temperatures.     

Super-symmetric informationally complete measurements

Symmetric informationally complete measurements (SICs in short) are highly symmetric structures in the Hilbert space. They possess many nice properties which render them an ideal candidate for fiducial measurements. The symmetry of SICs is intimately connected with the geometry of the quantum state space and also has profound implications for foundational studies. Here we explore those SICs that are most symmetric according to a natural criterion and show that all of them are covariant with respect to the Heisenberg–Weyl groups, which are characterized by the discrete analog of the canonical commutation relation. Moreover, their symmetry groups are subgroups of the Clifford groups. In particular, we prove that the SIC in dimension 2, the Hesse SIC in dimension 3, and the set of Hoggar lines in dimension 8 are the only three SICs up to unitary equivalence whose symmetry groups act transitively on pairs of SIC projectors. Our work not only provides valuable insight about SICs, Heisenberg–Weyl groups, and Clifford groups, but also offers a new approach and perspective for studying many other discrete symmetric structures behind finite state quantum mechanics, such as mutually unbiased bases and discrete Wigner functions.     

Synthesis of Diquinolineno[1,3,7,9]Tetraazacyclododecine-7, 15 (14H, 16H)-Dibenzene,and DNA Binding Studies of Macrocyclic Co(II), Cu(II) Complexes: As New Class of Antimicrobial Agent

The synthesis of macrocyclic ligand, diquinolineno[1,3,7,9]tetraazacyclododecine-7, 15 (14H, 16H)-dibenzene(L), is described. The metal complexes of the type [MLX₂], where (M = Co(II) (1), Cu(II) (2) and X = (Cl), have been synthesized by the reaction of ligand(L) with the corresponding metal salts, and characterized by elemental analysis, FT-IR, ¹H-NMR and electronic spectra. The binding property of the complexes with CT-DNA was studied by absorption spectra, viscosity measurements, as well as thermal denaturation studies. The absorption spectral results indicate that the complexes (1) and (2) are binds with base pairs of DNA. The intrinsic binding constant K_b had the value 3.8 × 10⁴M ^?1 for (1 Chappell, L. L., Voss, A. D. and Morrow, J. R. 1998. Inorg. Chem., 37(16): 3989–3998.  [Google Scholar]) and 3.3 × 10⁴ M^?1 for (2), respectively, in 5 mM Tris-HCl/50 mM NaCl buffer at pH 7.2. The viscosity measurement results show the viscosity of sonicated rod-like DNA fragments increased when the complex were added to the solution of calf thymus-DNA. The synthesized ligand and its metal complexes have been screened for antibacterial and antifungal activities.