Investigations on Chemical Vapour Transport of Intermetallic Phases in the System Co/Fe/Si

The ternary phases existing on the quasi binary section CoSi/FeSi and CoSi₂/β‐FeSi₂ have been investigated by solid state reactions and chemical transport. The solid solution serie Co_xFe_1‐xSi can be described as a regular solution. The transport behaviour calculated is in good agreement with the experiments. The phases have been characterized by X‐ray powder diffraction, EDX and ICP‐OES. The temperature dependence of the resistivity has been measured from 20 K up to room temperature on single crystals.     

YIHn: A New Family of Metal‐rich Hydride Halides

The graphite‐like yttrium hydride halides, YIH_n (0.8 ? n ? 1.0), have been prepared in quantitative yields by heating either YI₃, YH₂ (1:2) or stoichiometric YI₃, YH₂, Y mixtures in sealed Ta ampoules at 900°C. A lower limit of the homogeneity range, n ≈ 2/3, has been determined from dehydrogenation experiments. All YIH_n phases adopt the ZrBr‐type heavy‐atom structure. The hydrogen variation is accompanied by a change in the c lattice constant from 31.162(3) to 31.033(1) Å for n = 0.61(3) to 1.02(3). The YIH_n phases reversibly react with hydrogen at 400‐600°C to form the light green transparent compound YIH₂. However, increasing the reaction temperature above 700°C causes decomposition to an unidentified phase being in equilibrium with YH₂ and YI₃. The arrangement of the heavy atoms in YIH₂ (P m1; a = 3.8579(3) Å, c = 10.997(1) Å) corresponds to a four‐layer I‐Y‐Y‐I slab with the stacking sequence (AbaB) as was found by x‐ray powder diffraction data refinement with the Rietveld method. A miscibility gap exists between YIH and YIH₂. Samples YIH_n (n ? 1.0) show metallic conductivity at room temperature, which changes into semiconducting behavior with decreasing temperature as n approaches its lower value ≈ 2/3.     

Transition Metal Complexes with Pyrazole-based Ligands. Part 12. Characterisation and thermal decomposition of CuCl2 complexes with di- and trisubstituted pyrazoles

The synthesis of copper(II) chloride complexes with 3,5-dimethylpyrazole, 1-carboxamidine-3,5-dimethylpyrazole, 5-amino-4-carboxamide-1-phenylpyrazole and 4-acetyl-3-amino-5-methylpyrazole is described. The compounds are characterized by elemental analysis, FT-IR spectroscopy, thermal methods, magnetic moment and molar conductivity measurements. Thermal decomposition of the dichloro-(3,5-dimethylpyrazole)-copper(II) complex results in an unstable intermediate with a stochiometric composition. The decomposition of the other compounds is continuous. This revised version was published online in August 2006 with corrections to the Cover Date.     

Study of reaction processes by in-line near-infrared spectroscopy in combination with multivariate curve resolution: Esterification of myristic acid with isopropanol

The acid-catalysed esterification of myristic acid with isopropanol was studied by using near-infrared spectroscopy (NIR) in combination with soft-modeling curve resolution (MCR) methodology with a view to establishing the effect of experimental variables on the reaction kinetics. The reaction was conducted at temperatures above the boiling point of the alcohol, with continuous addition of an isopropanol/water mixture to the reactor. Spectral and concentration profiles were determined by applying soft-modeling curve resolution methodology to a column-wise augmented data matrix containing the spectra for the pure components. MCR profiles were compared with reference values and found to depart from then by less than 3% as %RSE for concentrations and to exhibit correlation above 0.999 for spectra.The reaction kinetics as estimated from the concentration profiles was found to be pseudo-first-order. Also, the pseudo-first-order rate constant was found to depend on the flow-rate of the isopropanol/water mixture and its water content; although the constant decreased with increase in the proportion of water, a content of ca. 15% could be used without important retarding effects on the kinetics. The proposed NIR-MCR method allows the rate constant and the influence of the initial water content to be determined with a view to minimizing consumption of the raw materials and optimizing the experimental conditions.     

Correlation between repeated measurements: bane and boon of the GUM approach to the uncertainty of measurement

With measurement uncertainty estimation accounting for all relevant uncertainty contributions, the results of measurements using the same procedure on different objects or samples may no longer be considered as being independent, and correlations have to be taken into account. For this purpose, a simple approximation for the estimation of covariances is derived and applied to the estimation of uncertainty for some basic combinations of two measurement results. This covariance estimate is also applied to the estimation of uncertainty for the mean value of the results of replicate measurements on the same object or sample.

SOME PRELIMINARY INFORMATION ON SYNDIOTACTIC POLYSTYRENE CATALYSTS

Syndiotactic specific polymerization of styrene has been investigated by ~(13)C NMR analysis and isotopic laelling methods. The value of the activation energy involved in the steric control has been determined. Some information of the number of the active sites and on the life of the catalysts is reported.     

Characterization of solute-membrane interactions by TMA-measurements

On the basis of relationships derived by Oplatka et al. [1] correlating the derivative of tensile stress with respect to temperature for a polymer strip at constant length, (/T) _t , with the derivative of entropy with respect to strip length, (S/l)_T, relationships are derived relating the derivation of strip length with respect to temperature under constant tensile stress, (l/T), with the derivative of entropy with respect to tensile load, (S/) _T . The developed relationships are applied to evaluate TMA (thermomechanical analysis) measurements performed with asymmetric and homogeneous cellulose acetate membranes where the membrane strips were kept in deionized water. Moreover, TMA measurements were performed with homogeneous CA membranes while maintaining the membrane strips in bathing solutions of different, but in each instance, constant electrolyte concentrationc _s (e.g., LiCl, LiNO₃, Li₂SO₄, CaCl₂; 0 c _s saturation). Under constant tensile stress, , as-cast asymmetric CA membranes, which are kept in deionized water, first elongate with increasing temperature at temperatures up to about 50°C. However, they shrink with a further increase of temperature in the temperature range 50°C up to about 90°C, whereas creeping starts at temperatures beyond 90°C, leading again to an elongation of the strip with a further increase of temperature. The negative apparent coefficient of thermal expansion, existing between 50° to 90°C, is consistent with shrinking phenomena observed with asymmetric CA membranes [2]. In addition, it correlates well with both an entropy decrease with increasing tensile stress at constant strip length and an entropy increase with decreasing strip length at constant tensile stress. Contraction of the strip with increasing temperature at constant tensile load might be due to increasing coil formation of polymer molecules rendered possible by disintegration of joints such as H-bonds between polymer chains. Depending on the electrolyte of the bathing solution and its concentration, homogeneous CA membranes exhibit positive and negative apparent linear coefficients of thermal expansion under constant tensile stress.     

Dielectric relaxation of ball-like labels in polyisoprene

Ball-like molecules with strong dipoles (labels) were mixed with synthetic polyisoprene (IR305) in low concentrations (<1%) and measured dielectrically in the frequency range 10^–2–10⁷ Hz and the temperature range –70–0°C (glass relaxation region). Calorimetric measurements showed that this type of label has a plasticizing effect on the polymeric matrix. The dielectric measurements showed that these ball-like molecules relax through cooperative rotations with the polymeric segments and at the same relaxation frequency. In addition, the label molecules showed a high-frequency local relaxation process. The relaxation strength ratio of the local process (X _local) to the total relaxation strength of the label was found to be dependent on the volume as well as on the shape of the label. A comparison between the relaxation behaviors of the ball-and rod-like molecules, having the same volume, showed that the length of the label is also an important parameter for the determination of the local contribution as well as of the cooperative relaxation mechanism of the label. The label relaxation process is discussed in relation to the molecular packing of the host polymer.     

New FIR laser lines and frequency measurements in CD3OD

Twenty-four new submillimeter laser lines in fully deuterated methyl alcohol (CD₃OD) in the wavelength range from 52 to 328 m have been obtained in a Fabry-Perot FIR resonator by optically pumping the methanol with a cw CO₂ laser. We have made accurate wavelength measurements and have determined the relative polarization of most of the known CD₃OD laser lines. The frequencies of 13 of the strongest lines were also measured.Contribution of the U.S. Government, not subject to copyright.     

Sources and Time-Variations of Reactive Hydrocarbon Immissions in the Atmosphere of Different Industrial and Rural Areas

Abstract

The problem of determining the concentration changes of reactive hydrocarbon immissions as a function of time was solved by means of an automatic gas chromatograph which, without enrichment, could record ethylene and acetylene in ppb concentrations. At the same time various other pollutants were covered, so that by a mutual allocation of the individual components it was possible to identify certain emitter groups. The results clearly show that ethylene and acetylene primarily originate from the combustion processes of the automobiles, while the handling and storage of petroleum products and their processing do not exert any influence on the immission of the two components. By way of time series measurements during a summer week in 1976 with very intensive solar radiation it was possible to show indirect secondary photochemical reactions.