精确确定光路中四分之一波片光轴方位的新方法

为了准确安装四分之一波片,介绍了一种精确确定光路中四分之一波片光轴方位的新方法,并利用米勒矩阵理论分析了影响测量结果的误差因素.测试方法所用的主要理论有米勒矩阵理论、傅里叶分析方法和最小二乘法.该方法利用最小二乘法得到了最优傅里叶系数,利用消光比测试原理实现了检偏棱镜的精确安装,利用反馈环控制系统对步进电机的步进角进行了控制.误差分析表明该方法的测量误差与四分之一波片光轴方位角本身的大小有关.实验结果表明该方法的标准不确定度为0.03.     

回旋速调管双阳极磁控注入电子枪的设计与优化

 根据8 mm回旋速调管放大器对双阳极磁控注入电子枪的要求,分析了电极形状、阳极电压、磁场、注电流对电子注横纵速度比和速度零散的影响,并进行了粒子模拟。分析表明：这些因素可归根为电场和磁场的作用,阴极附近高的电场有助于提高横纵速度比和降低速度零散;而高的磁场及低的磁压缩比将降低横纵速度比,但对速度零散影响无明显规律。在此基础上通过优化电极形状、磁场分布、电流、第一阳极电压和第二阳极电压,模拟并试制出工作电压65 kV、电流12 A、磁场1.4 T的双阳极电子枪,得到的横纵速度比值为1.4,横向速度零散为4.5%, 为8 mm回旋速调管提供了稳定高质量的电子注。     

A Testable Theory for the Emergence of the Classical World

The transition from the quantum to the classical world is not yet understood. Here, we take a new approach. Central to this is the understanding that measurement and actualization cannot occur except on some specific basis. However, we have no established theory for the emergence of a specific basis. Our framework entails the following: (i) Sets of N entangled quantum variables can mutually actualize one another. (ii) Such actualization must occur in only one of the 2^N possible bases. (iii) Mutual actualization progressively breaks symmetry among the 2^N bases. (iv) An emerging “amplitude” for any basis can be amplified by further measurements in that basis, and it can decay between measurements. (v) The emergence of any basis is driven by mutual measurements among the N variables and decoherence with the environment. Quantum Zeno interactions among the N variables mediates the mutual measurements. (vi) As the number of variables, N, increases, the number of Quantum Zeno mediated measurements among the N variables increases. We note that decoherence alone does not yield a specific basis. (vii) Quantum ordered, quantum critical, and quantum chaotic peptides that decohere at nanosecond versus femtosecond time scales can be used as test objects. (viii) By varying the number of amino acids, N, and the use of quantum ordered, critical, or chaotic peptides, the ratio of decoherence to Quantum Zeno effects can be tuned. This enables new means to probe the emergence of one among a set of initially entangled bases via weak measurements after preparing the system in a mixed basis condition. (ix) Use of the three stable isotopes of carbon, oxygen, and nitrogen and the five stable isotopes of sulfur allows any ten atoms in the test protein to be discriminably labeled and the basis of emergence for those labeled atoms can be detected by weak measurements. We present an initial mathematical framework for this theory, and we propose experiments.     

甲基丙烯酸缩水甘油酯与甲基丙烯酸甲酯的共聚合及竞聚率测定

以N,N-二甲基甲酰胺(DMF)为溶剂,实施了甲基丙烯酸缩水甘油酯(GMA)与甲基丙烯酸甲酯(MMA)的溶液共聚合,测定了共聚物P(GMA-co-MMA)的红外光谱(FT-IR),对其化学结构进行了表征,并采用差示扫描量热法(DSC)测定了共聚物的玻璃化转变温度(Tg).改变两单体投料比进行共聚合,采用化学分析法测定低转化率下(<7%)共聚物组成,重点研究了两单体的竞聚率.结果表明:GMA与MMA的共聚合易于进行,P(GMA-co-MMA)的玻璃化转变温度(Tg)介于均聚物PGMA(72℃)与PMMA(106℃)之间,当n(GMA)/n(MMA)=4/6时,共聚物的Tg为9l℃.采用FR和KT 2种作图法及YBR计算法对单体的竞聚率进行了计算和比较,结果表明:KT和YBR法较为准确,以DMF为溶剂时,GMA与MMA的竞聚率分别为2.14与0.69.     

掺镱双包层光纤放大器分布泵浦方式下的优化算法

 利用平均反转率迭代算法计算掺镱双包层光纤放大器分布泵浦方式下的稳态速率方程组,并采用遗传算法对分布泵浦功率的大小和每段光纤长度同时进行优化。评估函数中引入了每段光纤中最高温度的标准方差,以确保每段光纤中的最高工作温度是相同的。通过优化,7段泵浦的最高温度和标准方差分别为126.34 ℃和1.95 ℃ ,8段泵浦条件下的最高温度和标准方差分别为119.76 ℃和2.12 ℃。而未经优化的7段泵浦的最高温度和标准方差分别为147.12 ℃和21.37 ℃,8段泵浦条件下的最高温度和标准方差分别为139.95 ℃和20.83 ℃。计算结果表明：泵浦方式的优化降低了最高温度和标准方差,实现了光纤中温度分布的均匀性,并且通过增加泵浦段数可以进一步降低最高温度和平坦温度分布。     

Folding Free Energy Determination of an RNA Three-Way Junction Using Fluctuation Theorems

Nonequilibrium work relations and fluctuation theorems permit us to extract equilibrium information from nonequilibrium measurements. They find application in single-molecule pulling experiments where molecular free energies can be determined from irreversible work measurements by using unidirectional (e.g., Jarzynski’s equality) and bidirectional (e.g., Crooks fluctuation theorem and Bennet’s acceptance ratio (BAR)) methods. However, irreversibility and the finite number of pulls limit their applicability: the higher the dissipation, the larger the number of pulls necessary to estimate ΔG within a few kBT. Here, we revisit pulling experiments on an RNA three-way junction (3WJ) that exhibits significant dissipation and work-distribution long tails upon mechanical unfolding. While bidirectional methods are more predictive, unidirectional methods are strongly biased. We also consider a cyclic protocol that combines the forward and reverse work values to increase the statistics of the measurements. For a fixed total experimental time, faster pulling rates permit us to efficiently sample rare events and reduce the bias, compensating for the increased dissipation. This analysis provides a more stringent test of the fluctuation theorem in the large irreversibility regime.     

几何参数对喷射器性能的影响分析

运用计算流体动力学软件Fluent对喷射器进行数值模拟,研究了工作喷嘴喉部直径、等截面混合室直径和长度等几何参数对喷射器性能的影响,并对数值模拟结果进行了分析。研究表明:在一定的工况下,工作喷嘴及等截面混合室对喷射器性能有极大的影响,存在最佳的喉部和混合室直径使得喷射系数最大;随着混合室长度的增加,喷射器的喷射系数将逐渐降低。     

980nm单模运转未镀增透膜光纤光栅激光器

提出了一种工艺简单的980nm未镀增透膜的光纤光栅外腔半导体激光器。首先从理论上分析了边模抑制比(SMSR)与激光二极管前表面反射率R2、外腔长Lext和激光二极管一光纤耦合效率之间的关系,得出边模抑制比随R2和Lext的增大而减小,而随着激光二极管一光纤的耦合效率的提高而增大。从计算结果中还可以看出,即使半导体激光器不镀增透膜(R2=0．3时)。在其它参量合适的情况下,边模抑制比仍可大于40dB。然后,对其进行实验验证。在半导体激光器未镀模的情况下,选择光纤光栅发射率为0．5,外腔长为12．5cm,输人电流为28．8mA(约为阈值电流的2．4倍)时,通过仔细调节恒温、恒流电路,实现了边模抑制比高于40dB的稳定的单纵模输出,外腔激光器的线宽优于1．6MHz。     

微扫描技术对光电图像混淆噪声的影响

在分析采样理论和微扫描理论的基础上,引入了一个评价光电成像系统混淆噪声的品质因数,定量地分析了不同模式的微扫描对系统混淆噪声的改善程度。     

临近空间高空气球地基探测能力分析

基于探测系统背景辐射特性及高空气球辐射特性,建立了探测系统辐射接收模型.考虑大气传输、光学系统成像、探测器及其采样对辐射的影响,精确计算了高空气球辐射及背景辐射在探测器焦平面阵列上产生的信号电子数,推导出用于高空气球探测的信噪比.利用Modtran软件仿真计算了自身辐射、镜背景辐射、漫背景辐射亮度,分析了复杂大气条件下的气球辐射特性,及高空气球镜反射率、漫反射率与积分时间对探测系统信噪比的影响.结果表明:采用光谱滤波技术,在晴朗无云天气下,可见光近红外(0.6~2.4)探测器适合高空气球探测;在复杂大气条件下,长波红外(8~12)探测器适合高空气球探测;在积分时间为0.25s,镜反射率为0.32,漫反射率为0.68时,或积分时间为1s,镜反射率0.43,漫反射率0.57时,探测系统对高空气球探测能力最强.