Negatively charged hyperbranched polyether-based polyelectrolytes

The preparation of carboxylated hyperbranched polyglycerols of narrow polydispersity was achieved by modification (78–90%) of the hydroxyl end groups via Michael addition of acrylonitrile, followed by hydrolysis. High conversion could only be achieved for low molecular weight starting materials (520 and 1,030 g mol⁻¹). The solution properties of the resulting materials were investigated by dynamic light scattering (DLS), showing the formation of large aggregates with size depending on the pH value. After deposition on a negatively charged mica surface, the structures observed by atomic force microscope (AFM) show the coexistence of aggregates and single macromolecules. Most interesting, in the case of the lower molecular weight sample (PG 520 g mol⁻¹), extended and ordered terrace structures were formed, which are unprecedented for hyperbranched polymers and are of interest for surface modification in general.     

Hydride generation atomic fluorescence spectrometric determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter using multivariate optimization

A highly sensitive and simple method, based on hydride generation and atomic fluorescence detection, has been developed for the determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter samples. Atmospheric particulates matter was collected on glass fiber filters using a medium volume sampler (PM1 particulate matter). Two-level factorial designs have been used to optimise the hydride generation atomic fluorescence spectrometry (HG-AFS) procedure. The effects of several parameters affecting the hydride generation efficiency (hydrochloric acid, sodium tetrahydroborate and potassium iodide concentrations and flow rates) have been evaluated using a Plackett-Burman experimental design. In addition, parameters affecting the hydride measurement (delay, analysis and memory times) have been also investigated. The significant parameters obtained (sodium tetrahydroborate concentration, sodium tetrahydroborate flow rate and analysis time for As; hydrochloric acid concentration and sodium tetrahydroborate flow rate for Se(IV); and sodium tetrahydroborate concentration and sodium tetrahydroborate flow rate for Te(IV)) have been optimized by using 2ⁿ + star central composite design. Hydrochloric acid concentration and sodium tetrahydroborate flow rate were the significant parameters obtained for Sb and Bi determination, respectively. Using a univariate approach these parameters were optimized. The accuracy of methods have been verified by using several certified reference materials: SRM 1648 (urban particulate matter) and SRM 1649a (urban dust). Detection limits in the range of 6 × 10⁻³ to 0.2 ng m⁻³ have been achieved. The developed methods were applied to several atmospheric particulate matter samples corresponding to A Coruña city (NW Spain).     

Synthesis and structural characterization of [PhE(BNMe2)2]2 (E = P or As): Six-Membered P2B4 and As2B4 Rings with Unusual Structures

The reaction of either Li₂PPh or Li₂AsPh with the diborane(4) derivative B₂(NMe₂)₂Br₂ affords the compounds [PhP(BNMe₂)₂]₂ ( 1 ) or [PhAs(BNMe₂)₂]₂ ( 2 ) in good yield. Both 1 and 2 have cyclic structures featuring non-planar P₂B₄ or As₂B₄ six-membered rings which have chair configurations. Although all four borons in each ring have planar coordination, the two phosphorus or arsenic centers have different degrees of pyramidalization. Bond distances within the rings indicate that the B? B, B? P or B? As bonds are single, whereas the exo-B? N bond lengths are consistent with significant π-bonding. The ring structures of 1 and 2 are in sharp contrast to the related boron-nitrogen species (t-BuN)₂N₄Me₄ which has a nido-N₂B₄ framework. The attempted synthesis of the nitrogen analogue of 1 or 2 by using a similar approach did not result in the isolation of [PhN(BNMe₂)₂]₂, instead the tetramino diborane(4) species [B(NMe₂)NHPh]₂ ( 3 ), which has a structure similar to other tetramine diborane(4) compounds, was isolated.     

Density functional theory study of the mechanism of the proline-catalyzed intermolecular aldol reaction

Transition structures associated with the C-C bond-formation step of the proline-catalyzed intermolecular aldol reaction between acetone and isobutyraldehyde have been studies using density functional theory methods at the B3LYP/6-31G** computational level. A continuum model has been selected to represent solvent effects. For this step, which is the stereocontrolling and rate-determining step, four reactive channels corresponding to the syn and anti arrangement of the active methylene of the enamine relative to the carboxylic acid group of l-proline and the re and si attack modes to both faces of the aldehyde carbonyl group have been analyzed. The B3LYP/6-31G** energies are in good agreement with experiment, allowing us to explain the origin of the catalysis and stereoselectivity for these proline-catalyzed aldol reactions. Received: 2 April 2002 / Accepted: 18 July 2002 / Published online: 11 October 2002 Acknowledgements. This work was supported by research funds provided by the Ministerio de Educación y Cultura of the Spanish Government by DGICYT (project PB98–1429). All the calculations were performed on a Cray–Silicon Graphics Origin 2000 of the Servicio de Informática de la Universidad de Valencia. We are most indebted to this center for providing us with computer capabilities. Correspondence to: L. R. Domingo e-mail: domingo@utopia.uv.es     

Cis‐trans Isomerism in Copper(II) Complexes with N‐acyl Thiourea Ligands

The N‐acyl thiourea complexes bis[N,N‐diethyl‐N′‐(p‐nitrobenzoyl)‐thioureato]copper(II) ( 1a,1b ) and bis(N,N‐diphenyl‐N′‐benzoylthioureato)copper(II) ( 2a,2b ) crystallize in each case in two modifications. X‐ray structural analysis shows that 1a and 1b are cis‐trans isomers. This is very unusual for N‐acyl thioureato complexes because with exception of one platinum(II) complex up to now only cis complexes have been found. In contrast X‐ray structural analysis of both forms 2a and 2b of the other complex shows no cis‐trans pair. Both modifications are cis complexes. In solution both isomers of the copper(II) complexes are observable by EPR spectroscopy.     

Synthesis and anticonvulsant activity of new fluorinated N-phenyl- and N-benzyl-2-azaspiro[4.4]nonane- and [4.5]decane-1,3-dione derivatives: Part III

A series of N-phenyl- and N-benzyl-2-azaspiro[4.4]nonane- and [4.5]decane-1,3-diones containing a fluoro or trifluoromethyl substituents at the aryl ring was synthesized and tested for their anticonvulsant activity in the maximal electroshock (MES) and subcutaneous metrazole (sc.Met) tests. Among them, the most active were N-benzyl derivatives with fluoro and trifluoromethyl substituents especially at position-2 of the aryl moiety. The introduction of the phenyl ring at the imide nitrogen atom resulted in less active compounds. The results obtained showed that incorporation of fluoro or trifluoromethyl substituents increased the anticonvulsant activity in comparison to respective chloro, methoxy or methyl analogues. Crystallographically obtained conformation for one active and two inactive derivatives with trifluoromethyl substituents at position-2 or -3 of phenyl ring were initially used for molecular electrostatic potentials (MEP) calculation. The MEP distribution at carbonyl oxygen atoms was different for active and inactive molecules.     

MENTHOR,a database system for the storage and retrieval of three-dimensional molecular structures and associated data searchable by substructural,biologic, physical,or geometric properties

Summary MENTHOR is a database system for the storage and retrieval of three-dimensional coordinate and charge information on molecules as well as of traditional biological and physical properties. Our molecular graphics system retrieves from MENTHOR structural information in individual molecules and receptor map/macromolecular binding site hypotheses. Substructural searches of MENTHOR are used to find starting coordinates for molecular modeling and traditional database searches of MENTHOR identify compounds for which modeling is needed. It also forms the data to be searched with ALLADDIN, our substructure/geometric search program. MENTHOR expedites molecular modeling by organizing previous work and facilitating transmission of information between individuals. Examples from modeling of D-2 receptor agonists are shown.     

The number of kekulé structures for rectangle-shaped benzenoids,part VIII: Some perforated rectangles

Summary Classes of coronoids (or degenerate coronoids), r and q are obtained by providing the rectangle-shaped benzenoids R^j (m, 3) with a naphthalenic or pyrenic hole, respectively. The numbers of Kekulé structures (K) are studied. It was found for theK numbers of the classes in question:r=4/5R andq=1/5R. The classes r and q are similar to r and q, respectively, but the naphthalenic or pyrenic hole is oriented in a different way. For these classes it was found:r=3/5R,q=2/5R.

---

Die Anzahl von Kekulé-Strukturen für hochkondensierte Benzenoide mit rechteckigem Umriß, 8. Mitt.: Einige perforierte benzenoide Rechteck-Strukturen

Zusammenfassung Es werden Klassen r und q von Coronoiden (oder degenerierten Coronoiden) erhalten, wobei Benzenoide mit rechteckigem Umriß, R^j(m, 3), mit einem Naphthalin- oder Pyren-Loch versehen werden. Die Anzahl von Kekulé-Strukturen (K) wird untersucht; dabei wurde für die untersuchten Klassenr=4/5R undq=1/5R gefunden. Die Klassen r und q verhalten sich ähnlich, das Naphthalin- oder Pyren-Loch ist jedoch anders orientiert; dafür wurder=3/5R undq=2/5R gefunden.

     

Sr3(BS3)2 und Sr3(B3S6)2: Zwei neue nicht‐oxidische Chalkogenoborate mit trigonal‐planar koordiniertem Bor

Sr₃(BS₃)₂ and Sr₃(B₃S₆)₂: Two Novel Non‐oxidic Chalcogenoborates with Boron in a Trigonal‐Planar Coordination The thioborates Sr₃(BS₃)₂ and Sr₃(B₃S₆)₂ were prepared from strontium sulfide, amorphous boron and sulfur in solid state reactions at a temperature of 1123 K. In a systematic study on the structural cation influence on this type of ternary compounds, the crystal structures were determined by single crystal X‐ray diffraction. Sr₃(BS₃)₂ crystallizes in the monoclinic spacegroup C2/c (No. 15) with a = 10.187(4) Å, b = 6.610(2) Å, c = 15.411(7) Å, β = 102.24(3)° and Z = 4. The crystal structure of Sr₃(B₃S₆)₂ is trigonal, spacegroup R3¯ (Nr. 148), with a = 8.605(1) Å, c = 21.542(4) Å and Z = 3. Sr₃(BS₃)₂ contains isolated [BS₃]^3— anions with boron in a trigonal‐planar coordination. The strontium cations are found between the layers of orthothioborate anions. Sr₃(B₃S₆)₂ consists of cyclic [B₃S₆]^3— anions and strontium cations, respectively.     

Chiral amplification in macromolecular helicity assisted by noncovalent interaction with achiral amines and memory of the helical chirality

Poly[(4-carboxyphenyl)acetylene] (poly-1) exhibits an intense induced circular dichroism (ICD) in the UV-visible region upon complexation with excess (R)-1-(1-naphthyl)ethylamine ((R)-2), owing to the formation of a predominantly single-handed helical conformation of the polymer backbone. In the presence of a small amount of (R)-2, poly-1 showed a very weak ICD due to the lack of a single-handed helical conformation. However, we have found that the co-addition of the excess bulky, achiral 1-naphthylmethylamine (5) with a small amount of (R)-2 caused a dramatic increase in the ICD magnitude, comparable to the full ICD induced by excess (R)-2. This indicates that an almost single-handed helix can be induced on poly-1 upon complexation with a small amount of (R)-2 assisted by achiral 5. Furthermore, the induced single-handed helical poly-1 could be successfully memorized by the replacement of (R)-2 and 5 with achiral 2-aminoethanol or n-butylamine.