基于CMOS图像传感器的成像系统设计

以OV 5 116CMOS图像传感器为例 ,讨论了基于CMOS图像传感器的成像系统的电路设计方法及系统设计中应注意的问题 ;并通过对CMOS图像传感器外围电路的优化设计实现了成像系统的微型化和轻量化。     

Development,In-Vitro Characterization and Preclinical Evaluation of Esomeprazole-Encapsulated Proniosomal Formulation for the Enhancement of Anti-Ulcer Activity

Objective: The present study aimed to develop and optimize esomeprazole loaded proniosomes (EZL-PNs) to improve bioavailability and therapeutic efficacy. Method: EZL-PNs formulation was developed by slurry method and optimized by 33 box-Bhekhen statistical design software. Span 60 (surfactant), cholesterol, EZL concentration were taken as independent variables and their effects were evaluated on vesicle size (nm), entrapment efficiency (%, EE) and drug release (%, DR). Furthermore, optimized EZL-PNs (EZL-PNs-opt) formulation was evaluated for ex vivo permeation, pharmacokinetic and ulcer protection activity. Result: The EZL-PNs-opt formulation showed 616 ± 13.21 nm of vesicle size, and 81.21 ± 2.35% of EE. EZL-PNs-opt exhibited negative zeta potential and spherical confirmed scanning electron microscopy. EZL-PNs-opt showed sustained release of EZL (95.07 ± 2.10% in 12 h) than pure EZL dispersion. The ex-vivo gut permeation result exhibited a significantly (p < 0.05) enhanced flux than pure EZL. The in vivo results revealed 4.02-fold enhancement in bioavailability and 61.65% protection in ulcer than pure EZL dispersion (43.82%). Conclusion: Our findings revealed that EZL-PNs formulation could be an alternative delivery system of EZL to enhance oral bioavailability and antiulcer activity.     

CeO_2和Y_2Ba_1Cu_1O_(5-δ)共同掺杂对Y_1Ba_2Cu_3O_(7-δ)的超导电性及其晶格结构的影响

采用固相反应法成功制备出一批Y123与Y211的摩尔比为1∶0.47的混合物,并在此混合物的基础上掺入CeO2,掺入的比例x分别为0.5wt%、1.0wt%、2.0wt%、3.0wt%、4.0wt%。采用了X-射线衍射仪对样品的晶格结构进行了分析,测量结果表明:x=1.0wt%时掺杂效果最好,同时也充分说明Y123的晶格结构与其超导电性之间存在着一种内在的必然关联。并通过对其测试临界转变温度以及转变宽度,测量结果也充分验证了上述结论。     

声光栅正弦结构光投射器的光学系统设计

针对一种新型的声光波干涉测量技术,对声光栅正弦结构光投射器的三维测量工作原理进行了系统的分析,讨论了影响投射器光学系统结构的因素和影响接收屏上的光照度的因素,并进行了光学系统设计。在优化设计过程中,采用了限制光线最大入射角的方法,达到控制投射系统的球差和保证接收屏上照明均匀的要求。所设计的声光栅正弦光投射器具有很好的成像质量。应用该系统对在500mm处的石膏像上投射干涉条纹,可以得到能量比较均匀、变形量很小的干涉条纹图,利用该条纹图和相关的算法可以对具有复杂几何形状的物体进行有效的三维测量。     

强激光装置中玻璃疵病在线检测的光学系统设计

介绍了一种用于玻璃疵病在线检测的近摄工作距成像光学系统,其光组结构形式采用了光阑后置的准远心结构形式,主要光学参量为f′=14 mm;在物像距为250 mm约束条件下,物方视场达到90 mm（对角线）;F/number=3.56;光谱适应范围为400~800 nm,对应的空间分辨率为100 lp/mm时,调制传递函数大于0.29.     

Multi-scale homogenization-based modeling of semi-crystalline polymers

This paper presents a finite-strain, multi-scale constitutive model for semi-crystalline polymers, accounting explicitly for the current state and evolution of the underlying crystallographic, lamellar and morphological texture. Specifically, a semi-crystalline polymer is modeled as a two-scale composite, assumed to be, at the larger length scale, an aggregate of randomly distributed grains that, at the smaller length scale, are made up of alternating layers of an amorphous and a crystalline phase. The model incorporates finite elasticity for the amorphous phase and crystallographic hardening for the crystalline phase. The instantaneous effective response of this composite is determined by means of multi-scale homogenization methods, consisting in the use of a “linear comparison composite” (LCC) with the same internal structure as the actual nonlinear composite, with local properties that are optimally chosen via suitably designed variational principles. The effective properties of the resulting two-scale LCC are obtained through a “sequential” homogenization procedure, involving the exact solution for the effective behavior of the lamellar grains and a self-consistent estimate for the aggregate. The latter results are also used to establish evolution laws for the appropriate internal variables in the material. The predictions of the model for the macroscopic response and texture evolution in high-density polyethylene are confronted with available experimental results and compared with those of earlier models.     

光纤耦合数码系统传像特性

建立了光纤传像元件与光电阵列器件的匹配耦合模型,引入变动因子反映像素光纤排列的不确定性,进行了光纤耦合传像特性的仿真研究.针对9×9 μm2光敏元的阵列器件,分析了光纤传像元件结构参数变化对系统分辨率的影响,在光纤直径约为光敏元尺寸1/3时获得了相对经济合理的匹配结构,表明光纤耦合数码系统设计时必须考虑优化匹配问题.仿真结果还解释了系统的图像输出存在条纹和局部结构背景的原因,给出了相应的数值分析方法.     

Engineering Plasmonic Environments for 2D Materials and 2D-Based Photodetectors

Two-dimensional layered materials are considered ideal platforms to study novel small-scale optoelectronic devices due to their unique electronic structures and fantastic physical properties. However, it is urgent to further improve the light–matter interaction in these materials because their light absorption efficiency is limited by the atomically thin thickness. One of the promising approaches is to engineer the plasmonic environment around 2D materials for modulating light–matter interaction in 2D materials. This method greatly benefits from the advances in the development of nanofabrication and out-plane van der Waals interaction of 2D materials. In this paper, we review a series of recent works on 2D materials integrated with plasmonic environments, including the plasmonic-enhanced photoluminescence quantum yield, strong coupling between plasmons and excitons, nonlinear optics in plasmonic nanocavities, manipulation of chiral optical signals in hybrid nanostructures, and the improvement of the performance of optoelectronic devices based on composite systems.     

掺杂聚苯乙烯制备研究

讨论了惯性约束聚变研究中采用化学及物理手段在聚苯乙烯（PS）材料掺杂卤素、硅、氘等非金属元素以及铁、铬、钛等金属元素的原理和方法。利用硅烷偶联剂对氧化物表面进行了预处理,采用本体聚合的方式将氧化物掺杂在PS网络之中,简述了它们在ICF中的应用。     

Robust liquid crystal droplets

The preparation and properties of cyanobiphenyl liquid crystal droplets encapsulated by the polymerizable lecithin 1,2-bis(10,12-tricosadiynoyl)-sn-glyero-3-phosphocholine (DC_8,9PC) are described. Under a wide variety of preparation conditions the droplets obtain a diameter of approximately 10 mum. These droplets are stable for periods of over one year at room temperature. Furthermore, they are stable upon temperature cycling between the nematic and isotropic phases and between the smectic A to nematic to isotropic phase transitions.