Effects of annealing on crystallinity and phase behaviour of PET/PC block copolymers

The effects of the annealing on the properties of PET/PC block copolymers, obtained by reactive blending in the presence of different catalysts and for different mixing times, have been studied. The annealing, performed in conditions that promote the crystallization, has been used to better understand the role of block length in determining the phase behaviour. The copolymers characterized by blocks with molecular weight larger than 8000 are able to reorganize towards more ordered domains. This rearrangement maintains the phase separation, as two crystalline phases are present before and after annealing, due to the immiscibility of long blocks. In copolymers characterized by blocks with molecular weight equal to about 2500, that is the higher limit for the miscibility in the amorphous state in PET/PC block copolymers studied in this work, the rearrangement of the chains during annealing causes a phase separation leading to two crystalline phases. Only in the copolymers with molecular weight of blocks lower than 1500, the very short block length hinders the crystallization: therefore, only in this case a phase separation does not take place after annealing.     

Compositional Profiles in Silica-Based Sol-Gel Films Doped with Erbium and Silver, by RBS and ERDA

Photosensitive organic-titania hybrid materials have been prepared from metal alkoxides and various organic ester compounds with double bonds. The refractive index of the film increases with the decrease of the concentration of the organic ester compound, and the highest refractive index of 1.62 is obtained when 2-hydroxymethyl acrylate (HOA) is used as the organic ester and the molar ratio of HOA to Ti is 0.5. The material with the highest refractive index is exposed to femtosecond pulse using the multi-beam laser interference technique. After laser irradiation, the irradiated parts of the material are photopolymerized and periodic structures can be obtained by development of the unirradiated parts. In the case of laser irradiation of 120 J total energy for 5 min, the periodic structure obtained corresponds to 2D photonic crystal structure which is composed of two parts; the material with the highest refractive index and the air.     

层状LiMnO_2正极材料的研究进展

层状LiMnO2 化合物的研究是目前锂离子电池正极材料锂锰氧化物研究工作的新热点 ,本文综述了近年来国内外LiMnO2 化合物的研究进展 ,主要阐述了具有层状和扭曲层状结构的m LiMnO2和o LiMnO2 的结构、电性能、合成和改性方法等方面的研究状况 ,重点介绍了离子交换法合成层状LiMnO2 的原因和机理。探索新的合成方法和掺杂其它金属离子改性以提高循环性能是今后LiMnO2 的研究趋势。     

Adsorption Isotherm of Water Vapor and Its Large Hysteresis on Highly Ordered Mesoporous Silica

The first and second adsorption–desorption isotherms of water vapor on a new mesoporous material derived from kanemite have been measured. The isotherms show unusual type V isotherms and large hysteresis. The type V isotherms, which have never been observed for the other adsorbates, suggest that the mesoporous material has a hydrophobic surface, although the hydrophobicity decreased after treatment with water vapor because of rehydration of the surface. The significantly large hysteresis could be explained by the difference in contact angle between adsorption and desorption.     

以纤维素材料为基质的降解塑料的研究进展

本文详述了以天然高分子纤维素材料为基质的降解塑料的发展。纤维素材料由于其来源丰富,有良好的反应性,优异的生物降解性,无毒性等,因而可用来制备降解塑料．其开发和应用是解决目前世界范围内的“白色污染”的一条理想途径．     

聚碳硅烷／纳米镍粉的热裂解

聚碳硅烷／纳米镍粉的热裂解王军＊宋永才冯春祥（国防科学技术大学材料工程与应用化学系长沙４１００７３）关键词聚碳硅烷，纳米材料，镍，热解，碳化硅纤维１９９６－０９－１７收稿，１９９６－１２－１３修回国家攻关计划和“８６３”高技术资助项目聚碳硅烷（ＰＣＳ...     

对杂散光测试材料要求的探讨

从分光光度计杂散光测试原理出发,对我国目前在用的几种杂散光测试材料特性进行了分析。通过实验验证,指出了其中的不合理处,并提出了对杂散光测试材料特性的基本要求。 ,     

Vibronisches Spektralverhalten von Molekülen: XX. Theoretische Untersuchung der S2←S0-Absorption des Pyrens im Rahmen der Herzberg-Teller-Näherung erster Ordnung

Summary On the basis of the completely-optimized S₀ and S₂ molecular geometries of pyrene the vibrational structure of the electronic S₂S₀ transition was calculated within both the Condon approach and the first-order Herzberg-Teller approach. The theoretical results demonstrate the significant influence of vibronic coupling. An analysis of the active vibrational modes is given. The theory-experiment comparison within the Herzberg-Teller approach is satisfactory.

     

A novel approach to study the isothermal behaviour of substances after 0.01–1 s from the chemical process initiation

New modifications of a contact heater are suggested for investigating thermal decomposition processes, as well as for determining kinetic characteristics of substances under conditions of intense heating to a fixed constant temperature.

---

Zusammenfassung Zur Untersuchung von thermischen Zersetzungsprozessen und der Bestimmung der Reaktionskinetik von Substanzen bei intensivem Erhitzen auf vorgegebene konstante Temperaturen wird eine neue Abart von Kontakterhitzern beschrieben.

     

微乳液法合成LiFePO4 / C正极材料及其电化学性能

本文采用微乳液方法合成了纳米LiFePO₄ / C正极材料。制备样品分别用XRD和SEM进行表征，充放电测试其电化学性能。600 ℃制备样品为单一物相，平均粒径90 nm，在室温2.0～4.0 V (vs Li) 放电电压范围和15 mA·g^-1放电速率下，首次放电容量达到159 mAh·g^-1。制备样品同样展现良好的循环性能。在15 mA·g^-1速率下40次循环后，制备样品放电容量仍保持首次放电容量的98.9%。优异的电化学性能得益于样品颗粒的纳米尺寸、均匀分布以及表面碳层包覆提高了活性材料的电子电导率。