Kinetics of the Coordination Transformation for Preparation of Nanosized ZnS in a PVA Film

Abstract

This study was focused on the pervasion process of sulfion in a PVA–Zn²⁺ complex film. A diffusion equation for this process, based on the Fick first diffusion law, is suggested, which was in good agreement with the experimental results. The diffusion constant was 9.92 × 10^?6 cm²/sec, calculated by combining the model and the experimental results.     

A study on the phase transformation behaviour of Cu-20wt.Sn alloy produced using powder metallurgy method: Experimental and molecular dynamics modelling

In this study, Cu-20wt.Sn alloy was produced by powder metallurgy (PM) method by using high purity element powders. The phases in the microstructure of the produced alloy were determined by XRD study. The phase transformation behaviour of the alloy was investigated by DSC and modelling method. Moreover, the Cu-20wt.Sn alloy system was modelled with molecular dynamics (MD) simulation based on modified Embedded Atom Method (MEAM). The radial distribution function (RDF) was calculated to determine the structural properties of system during the phase transformations. The experimental results showed that the transformation ($\alpha +\delta$) → ($\alpha +\gamma$) occur at temperature above 500°C. The simulation results showed that the phase transformation $\alpha +\delta \to \alpha +\gamma$ occurs at 550°C temperature. Our simulation results are in reasonable agreement with the experimental data.     

A 1D Roe decomposition of a system of equations governing wave height transformation

A Roe‐type decomposition for a system of equations governing onshore/offshore wave transformation in coastal waters is derived. The equation set approximated pertains to coastal waters prior to wave breaking, and is based on depth‐averaging and time‐averaging of the Euler equations. The equations are those used in many commercial codes for simulation of wave height and wave‐averaged currents. This novel approach uses a combination of some standard Roe averages, together with physical reasoning and power series expansions to derive a Roe‐averaged Jacobian (with real, linearly independent eigenvectors) and ensures conservation, and thereby effects the decomposition. It is shown that the resulting derived Roe‐averaged quantities are accurate to a high degree, by comparing them with their analytical equivalents for a wide range of nondimensional water depths and slopes likely to be encountered in coastal problems. Numerical tests of time‐invariant wave height transformation and wave group propagation are undertaken; these indicate good performance of the scheme in practice. Copyright © 2011 John Wiley & Sons, Ltd.     

A New,Mild, and Rapid Transformation of Acylals to Bisulfites in One-Pot Synthesis by Bismuth (III) Nitrate Pentahydrate

Abstract

Direct conversion of acylals to the corresponding bisulfites can be easily performed in the presence of bismuth (III) nitrate pentahydrate in ethanol at room temperature in good yields.     

The Effect of Some Physical Factors on the II → I Phase Transition of Isotactic Polybutene-1

Abstract

Isotactic polybutene-1 exhibits excellent physical, mechanical and chemical properties dependent on its most important polymorphic crystal forms, called forms I, II and III. The most stable form, form I, is generated via a slow, solid-state transformation of the tetragonal, kinetically favored form II. The slow transformation rate of form II to I, accompanied by sample shrinkage, attains its maximum at ca 25?°C and takes 7–10?days, which is a technical problem for iPB-1 practical applications. We describe here the results reported in the literature by the authors and others of the effect of various physical factors that affect the transformation rate, with the goal of determining means of accelerating it; it is noted explanations of the effects are limited and in many cases, not given.     

Rogue wave solutions for a generalized nonautonomous nonlinear equation in a nonlinear inhomogeneous fiber

In this paper, we investigate a generalized nonautonomous nonlinear equation which describes the ultrashort optical pulse propagating in a nonlinear inhomogeneous fiber. By virtue of the generalized Darboux transformation, the first- and second-order rogue-wave solutions for the generalized nonautonomous nonlinear equation are obtained, under some variable–coefficient constraints. Properties of the first- and second-order rogue waves are graphically presented and analyzed: When the coefficients are all chosen as the constants, we can observe the some functions, the shapes of wave crests and troughs for the first- and second-order rogue waves change. Oscillating behaviors of the first- and second-order rogue waves are observed when the coefficients are the trigonometric functions.     

Thermal stability,morphology and electronic band gap of Zn(NCN)

The thermal behavior of zinc carbodiimide Zn(NCN) was examined in the temperature range between 200 and 1100 °C in Ar atmosphere. The material starts to partially decompose at about 800 °C. Heat treatment at temperatures beyond 800 °C results in the formation of the byproducts nitrogen-containing bamboo-like multiwall carbon-nanotubes of 20–50 nm in diameter due to a partial decomposition of Zn(NCN) into dicyan (CN)₂, zinc and nitrogen gas followed by the polymerization of the former product to paracyanogen (CN)_n. At 1100 °C, the yield of the residual carbodiimide depends on the dwelling time and the initial amount of powder used for pyrolysis. One hour dwelling at 1100 °C yields ∼50% of the Zn(NCN) separated as pure material. Temperature-induced change in the band structure, namely indirect-to-direct band gap transition, is registered when compared the Zn(NCN) at room temperature with the residual material annealed at 1100 °C. The transition from indirect (E_g = 4.32 eV) to direct band gap (E_g = 4.93 eV) is due to the thermal annealing process which results in healing of crystal defects.     

Highly stereoselective anti-aldol reactions catalyzed by simple chiral diamines and their unique application in configuration switch of aldol products

Chiral derivatives of trans-1,2-diaminocyclohexane with different N,N-dialkyl groups in well-defined orientations have been synthesized, and applied as catalysts for the asymmetric aldol reaction between a variety of aldehydes and ketones. Enantiomeric catalyst 1j catalyzed the reaction in ethanol and provided excellent diastereoselectivity and enantioselectivity. Significantly, simple replacement of organic solvents with water switched the products of the aldol reactions from anti to syn configuration. Such catalytic reactions led to the products with anti to syn diastereoselectivity up to 99:1 in ethanol, while in water gave the products with syn to anti diastereoselectivity up to 99:1.