Non isothermal heat capacities and chemical reactions using a modulated DSC

An evaluation of measurements of heat capacities by modulated differential scanning calorimetry, MDSC is presented. Heat capacities were obtained from 130 to 550 K by a non isothermal technique in which a periodic modulation was added to the linear heating rate. Effects of amplitude and period of modulation, sample weight, sample type, pan type, and cell imbalance are described. Results are compared with those obtained using the isothermal technique. Heat capacity could be measured well into the decomposition region and separated from the non reversing signal due to chemical reaction (degradation), thus allowing a precise detection of onsets of the thermal degradation. This additional information will aid in the interpretation of the degradation chemistry, a field vital for the petroleum-industry.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayPart of this paper was presented at the 23rd Conference of the North American Thermal Analysis Society, Toronto, Canada, September 25–28, 1994.The author (MVN) acknowledges the experimental assistance provided by J. Balogh of Exxon Research and Engineering Company, Linden. Helpful discussions with A. Boller of the University of Tennessee at Knoxville, Dr. Y. Jin, General Electrical, and Dr. S. Sauerbrunn formerly of TA Instruments are also acknowledged.     

Thermodynamics of liquid mixtures containing n-alkanes and strongly polar components: VE and C P E of mixtures with either pyridine or piperidine

Excess molar volumes V _E and excess molar heat capacities C _P ^/E at constant pressure have been obtained, as a function of mole fraction x₁, for several binary liquid mixtures belonging either to series I: pyridine+n-alkane (C_lH_2l+2), with l=7, 10, 14, 16, or series II: piperidine+n-alkane, with l=7, 8, 10, 12, 14. The instruments used were a vibrating-tube densimeter and a Picker flow microcalorimeter, respectively. V ^E of pyridine+n-heptane shows a S-shaped composition dependence with a small negative part in the region rich in pyridine (x₁>0.90). All the other systems show positive V ^E only. The excess volumes increase with increasing chain length l of the n-alkane. The excess molar heat capacities of the mixtures belonging to series II are all negative, except for a small positive part for piperidine+n-heptane in the region rich in piperidine (x₁>0.87). The C _P ^/E at the respective minima, C _P ^/E (x_1,min ), become more negative with increasing l, and the x_1,min values range from about 0.26 (l=7) to 0.39 (l=14). Most interestingly, mixtures of series I exhibit curves of C _P ^/E against x₁ with two minima and one maximum, the so-called W-shape curves.Dedicated to Professor A. Néckel on the occasion of his 65^th birthday. Communicated in part at the XVII^èmes Journées de Calorimétrie, d'Analyse Thermique et de Thermodynamique Chimique, Ferrara, Italy, 27–30 October, 1986.     

Influence of Cycle Temperatures on the Thermochemical Heat Storage Densities in the Systems Water/Microporous and Water/Mesoporous Adsorbents

The adsorption equilibrium of water on microporous adsorbents (zeolites of NaA-, NaY- and NaX-type as well as their ion exchanged forms) and on mesoporous adsorbents (different silica gels and composite material i.e. silica gel + salt hydrate) has been studied experimentally and theoretically. Using the Dubinin theory of pore filling the characteristic curves of the adsorption systems and other relevant dependences such as isotherms, isobars, isosteres and the curve of the differential heat of adsorption were calculated. For all systems investigated the adsorption were calculated. A_ads and the desorption potential A_des of the closed heat storage system were estimated. These values define the working range of the adsorption/desorption cycle and allow to calculate the specific heat storage density Δ h_sp. On the basis of Δ h_sp the different adsorbents were compared in order to select the optimal porous storage material for a given application. The presented experimental and theoretical investigations show that the adsorption systems water-zeolite and water-composites are promising working pairs for thermochemical heat storage processes for hot tap water supply and space heating of single family dwellings. The advantage of the water-composite system is the low desorption temperature (solar energy) the main shortcoming the low temperature lift. The advantage of the water zeolite system is the high temperature lift, the shortcoming are the relative high desorption temperatures.     

Thermodynamic properties of alkali halides. V. Temperature and pressure dependence of excess free energies in water

A simple equation has been derived relating the temperature dependence of activity functions with excess enthalpies and excess heat capacities. Using experimentally determined parameters at 298.15°K, it is possible to predict osmotic coefficients and mean activity coefficients of alkali halides in water up to 1 m from 273°K to about 350°K. In general, the predicted functions agree with the measured values within the uncertainty of the activity data. An equation is also given for the pressure dependence of the excess free energies, but it was not possible to check the limitation of this equation due to lack of activity data at various pressures.To whom correspondence should be addressed.     

XPS characterization of wood chemical composition after heat‐treatment

XPS was used to characterize the chemical changes occurring after drying or applying a heat‐treatment to beech wood samples. Our results indicate that the surface of this air‐exposed material could be strongly affected either by the ambient atmosphere during storage or by the complex atmosphere in the oven during drying or heat‐treatment. However, the O/C ratio measured after removal of a thin slice of a few millimetres of an untreated sample is in reasonable agreement with that calculated from the well‐established chemical composition of beech. Through this methodology (equivalent to scraping for hard materials) it is expected to get a realistic characterization of the wood. The reliability and repeatability of the XPS measurements have been checked and the method applied to the study of the chemical changes of the beech samples subjected to heat‐treatment. Heating at 240 °C induces a significant decrease of the O/C ratio from 0.55 before to 0.44 after the treatment. Heat‐treatment induces also a decrease of the C₂ carbon contribution (carbon atom bound to a single non‐carbonyl oxygen) associated with an increase of the C₁ carbon contribution (carbon atoms bound only to carbon or hydrogen atoms), in agreement with chemical modifications reported previously in the literature. Thanks to the small analysed area of the equipment used in this study, different spots were analysed to demonstrate the presence or absence of a gradient of chemical composition due to thermal degradation or migration of extractives from within the wood structure to its surface. At the scale of our observations, the different wood samples investigated (dried or heat treated) appear to be homogeneous. Copyright © 2006 John Wiley & Sons, Ltd.     

Computation of Entropy Production in Stratified Flames Based on Chemistry Tabulation and an Eulerian Transported Probability Density Function Approach

This contribution presents a straightforward strategy to investigate the entropy production in stratified premixed flames. The modeling approach is grounded on a chemistry tabulation strategy, large eddy simulation, and the Eulerian stochastic field method. This enables a combination of a detailed representation of the chemistry with an advanced model for the turbulence chemistry interaction, which is crucial to compute the various sources of exergy losses in combustion systems. First, using detailed reaction kinetic reference simulations in a simplified laminar stratified premixed flame, it is demonstrated that the tabulated chemistry is a suitable approach to compute the various sources of irreversibilities. Thereafter, the effects of the operating conditions on the entropy production are investigated. For this purpose, two operating conditions of the Darmstadt stratified burner with varying levels of shear have been considered. The investigations reveal that the contribution to the entropy production through mixing emerging from the chemical reaction is much larger than the one caused by the stratification. Moreover, it is shown that a stronger shear, realized through a larger Reynolds number, yields higher entropy production through heat, mixing and viscous dissipation and reduces the share by chemical reaction to the total entropy generated.     

气粒混合物非灰辐射特性合并宽窄谱带K分布模型

气粒混合物辐射问题具有全场性、非灰性、耦合性等特点,准确预估高温燃气/粒子非灰辐射特性是非常重要的。本文将合并宽窄谱带K分布模础(CWNBCK)与离散坐标法(DOM)结合,开展了非灰气粒混合物辐射换热问题的模拟工作,分别验证了一维和三维情况下应用该模型的准确性,给出不同工况下的热流源项、壁面热流或辐射热流等。结果表明:该模型能够给出与SNB模型精度基本相同的结果,考虑其计算效率的提高,可以在工程实际中应用该模型计算非灰气粒混合物辐射换热。     

A CSP and tabulation-based adaptive chemistry model

We demonstrate the feasibility of a new strategy for the construction of an adaptive chemistry model that is based on an explicit integrator stabilized by an approximation of the Computational Singular Perturbation (CSP)-slow-manifold projector. We examine the effectiveness and accuracy of this technique first using a model problem with variable stiffness. We assess the effect of using an approximation of the CSP-slow-manifold by either reusing the CSP vectors calculated in previous steps or from a pre-built tabulation. We find that while accuracy is preserved, the associated CPU cost was reduced substantially by this method. We used two ignition simulations – hydrogen–air and heptane–air mixtures – to demonstrate the feasibility of using the new method to handle realistic kinetic mechanisms. We test the effect of utilizing an approximation of the CSP-slow-manifold and find that its use preserves the order of the explicit integrator, produces no degradation in accuracy, and results in a scheme that is competitive with traditional implicit integration. Further analysis on the performance data demonstrates that the tabulation of the CSP-slow-manifold provides an increasing level of efficiency as the size of the mechanism increases. From the software engineering perspective, all the machinery developed is Common Component Architecture compliant, giving the software a distinct advantage in the ease of maintainability and flexibility in its utilization. Extension of this algorithm is underway to implement an automated tabulation of the CSP-slow-manifold for a detailed chemical kinetic system either off-line, or on-line with a reactive flow simulation code.     

Thermal Conductivity of CuSbSe2 and CuBiSe2 in the Solid and Liquid State

Abstract

Thermal Conductivity of CuSbSe₂ and CuBiSe₂ have been studied in the solid and liquid state in a wide range of temperatures. Measurements of thermal conductivity were carried out using the concentric cylinder method which is based on the flow of heat through a cylindrical wall.     

Heat conductivity of three periodic Hard Disks via nonequilibrium molecular dynamics

We use a driving field, of the type first suggested by Evans, to generate a steady heat current in the simplest possible system, a two-dimensional periodic fluid of three hard disks. Hard-disk motion equations can be conveniently derived from repulsive constant-force or linear-force potentials by considering the infinitely repulsive limit of these potentials. We show that the isoenergetic and isokinetic forms of the nonequilibrium equations of motion generate steady-state heat conductivities differing by terms of order 1/N, whereN is the number of particles. The resulting conductivities appear to vary as the logarithm of the driving field strength. Even at low fields, the three-body periodic-system results lie well below Enskog's infinite-system prediction.