Analysis of aquatic‐phase natural organic matter by optimized LDI‐MS method

The composition and physiochemical properties of aquatic‐phase natural organic matter (NOM) are most important problems for both environmental studies and water industry. Laser desorption/ionization (LDI) mass spectrometry facilitated successful examinations of NOM, as humic and fulvic acids in NOM are readily ionized by the nitrogen laser. In this study, hydrophobic NOMs (HPO NOMs) from river, reservoir and waste water were characterized by this technique. The effect of analytical variables like concentration, solvent composition and laser energy was investigated. The exact masses of small molecular NOM moieties in the range of 200–1200 m/z were determined in reflectron mode. In addition, spectra of post‐source‐decay experiments in this range showed that some compounds from different natural NOMs had the same fragmental ions. In the large mass range of 1200–15 000 Da, macromolecules and their aggregates were found in HPO NOMs from natural waters. Highly humic HPO exhibited mass peaks larger than 8000 Da. On the other hand, the waste water and reservoir water mainly had relatively smaller molecules of about 2000 Da. The LDI‐MS measurements indicated that highly humic river waters were able to form large aggregates and membrane foulants, while the HPO NOMs from waste water and reservoir water were unlikely to form large aggregates. Copyright © 2014 John Wiley & Sons, Ltd.     

A relationship between macroradical decay kinetics and α-segmental dynamics in glassy amorphous polymers

For a series of five amorphous polymers with a broad range of T_g values the kinetics of macroradical decay was measured by ESR technique and evaluated by the second-order kinetic model. It was found that the temperature T_tr of the transition between two regions of different reactivity in free radical decay reaction agrees quite well with the temperature parameter T₀ of the Vogel-Fulcher-Tamman-Hesse (VFTH) equation for α-segmental dynamics. This parameter represents the onset of α-segmental mobility in glassy state below T_g. A nontraditional way of the estimation of T₀ values for α-segmental dynamics through study of the macroradical decay in glassy state of amorphous polymers has been suggested. © 1996 John Wiley & Sons, Inc.     

Study of semileptonic decay of ${\bar{B}}_{s}^{0} \rightarrow \phi {l}^{+}{l}^{-}$ in QCD sum rule

In this work we study the semileptonic decay of ${\bar{B}}_{s}^{0}\to \phi {l}^{+}{l}^{-}$ (l=e, μ, τ) with the QCD sum rule method. We calculate the ${\bar{B}}_{s}^{0}\to \phi $ translation form factors relevant to this semileptonic decay, then the branching ratios of ${\bar{B}}_{s}^{0}\to \phi {l}^{+}{l}^{-}$ (l=e, μ, τ) decays are calculated with the form factors obtained here. Our result for the branching ratio of ${\bar{B}}_{s}^{0}\to \phi {\mu }^{+}{\mu }^{-}$ agree very well with the recent experimental data. For the unmeasured decay modes such as ${\bar{B}}_{s}^{0}\to \phi {e}^{+}{e}^{-}$ and ${\bar{B}}_{s}^{0}\to \phi {\tau }^{+}{\tau }^{-}$, we give theoretical predictions.     

Experimental review of the ϒ(1S, 2S, 3S) physics at e+e− colliders and the LHC

The three lowest-lying \mathrm{\Upsilon } states, i.e., \mathrm{\Upsilon }(1S), \mathrm{\Upsilon }(2S), and \mathrm{\Upsilon }(3S), composed of bb¯ pairs and below the BB ¯ threshold, provide a good platform for the researches of hadronic physics and physics beyond the Standard Model. They can be produced directly in e⁺e⁻ colliding experiments, such as CLEO, Babar, and Belle, with low continuum backgrounds. In these experiments, many measurements of the exclusive \mathrm{\Upsilon }(1S) and \mathrm{\Upsilon }(2S) decays into light hadrons, which shed light on the “80% rule” for the Okubo–Zweig–Iizuka suppressed decays in the bottomonium sector, were carried out. Meanwhile, many studies of the charmonium and bottomonium productions in \mathrm{\Upsilon }(1S, 2S, 3S) decays were performed, to distinguish different Quantum Chromodynamics (QCD) models. Besides, exotic states and new physics were also extensively explored in \mathrm{\Upsilon }(1S, 2S, 3S) decays at CLEO, BaBar, and Belle. The \mathrm{\Upsilon }(1S, 2S, 3S) states can also be produced in pp collisions and in collisions involving heavy ions. The precision measurements of their cross sections and polarizations at the large hadron collider (LHC), especially in the CMS, ATLAS, and LHCb experiments, help to understandΥproduction mechanisms in pp collisions. The observation of the sequentialΥsuppression in heavy ion collisions at CMS, LHCb, and ALICE is of great importance for verifying the quark–gluon plasma predicted by QCD. In this article, we review the experimental results on \mathrm{\Upsilon }(1S, 2S, 3S) at e⁺e⁻ colliders and the LHC, and summarize their prospects at Belle II and the LHC.     

制动器管裂纹原因分析

重型汽车制动器管在潮湿的环境中使用时发生破裂,采用化学成分分析、力学性能试验、断口分析和金相分析等方法对破裂的制动器管进行分析.结果表明,制动器管的裂纹主要产生于存在加工应力的弯曲部位,应力腐蚀是造成其破裂的主要原因.同时在选材方面提出建议.     

An Ultra‐Long‐Life Lithium‐Rich Li1.2Mn0.6Ni0.2O2 Cathode by Three‐in‐One Surface Modification for Lithium‐Ion Batteries

Voltage decay and capacity fading are the main challenges for the commercialization of Li‐rich Mn‐based layered oxides (LLOs). Now, a three‐in‐one surface treatment is designed via the pyrolysis of urea to improve the voltage and capacity stability of Li_1.2Mn_0.6Ni_0.2O₂ (LMNO), by which oxygen vacancies, spinel phase integration, and N‐doped carbon nanolayers are synchronously built on the surface of LMNO microspheres. Oxygen vacancies and spinel phase integration suppress irreversible O₂ release and help lithium ion diffusion, while N‐doped carbon nanolayer mitigates the corrosion of electrolyte with excellent conductivity. The electrochemical performance of LMNO after the treatment improves significantly; the capacity retention rate after 500 cycles at 1 C is still as high as 89.9 % with a very small voltage fading rate of 1.09 mV cycle^?1. This three‐in‐one surface treatment strategy can suppress the voltage decay and capacity fading of LLOs.     

Ultrafast Decay Dynamics of 2-Hydroxypyridine Excited to S1 Electronic State

The S\begin{document}$_1$\end{document} state decay dynamics of 2-hydroxypyridine following UV excitation at a wavelength range of 276.9\begin{document}$-$\end{document}250.0 nm is investigated using femtosecond time-resolved photoelectron imaging technique. Based on pump wavelength dependence of the decay dynamics, a refined decay picture is proposed. At pump wavelength of 276.9 nm, the S\begin{document}$_1$\end{document} state is depopulated through intersystem crossing to lower triplet state(s). At 264.0 nm, both intersystem crossing to lower triplet state(s) and internal conversion to the ground state are in operation. At 250.0 nm, internal conversion to the ground state becomes dominated.     

On the decay and blow‐up of solution for coupled nonlinear wave equations with nonlinear damping and source terms

In this work, we consider a nonlinear coupled wave equations with initial‐boundary value conditions and nonlinear damping and source terms. Under suitable assumptions on the damping terms and source terms and initial data in the stable set, we obtain that the decay estimates of the energy function is exponential or polynomial by using Nakao's method. By using the energy method, we obtain the blow‐up result of solution with some positive or nonpositive initial energy. Copyright © 2016 John Wiley & Sons, Ltd.     

SIMCA法判别分析木材生物腐朽的研究

木材是一种生物质材料,容易受到各种微生物的危害,生物腐朽可以迅速导致木材结构的破坏,因此,对木材生物腐朽的快速、准确地检测或鉴定具有重要意义。近几年来,近红外光谱和SIMCA方法正被用于识别或检测食品、药品和农产品等研究中,因此,本研究尝试利用近红外光谱结合SIMCA方法来检测木材的生物腐朽。研究结果表明,应用近红外光谱和SIMCA方法能有效地判别木材的生物腐朽类型,通过培训集样本建立的基于PCA分析的SIMCA判别模型对未腐朽、白腐和褐腐三种类型样本进行回判,判别准确率分别为100%, 82.5%和100%;而对未知腐朽类型的样本(包括未腐朽、白腐和褐腐样本),判别准确率分别为100%, 85%和100%;SIMCA方法对未腐朽和褐腐类型的判别准确率均达到100%,但对白腐样本都有错判,造成这种错判的主要原因可能是由于样本包括的信息不够丰富以及腐朽初期白腐和褐腐试样的性质差异太小等。     

荧光寿命的正弦调制测量法及分析

设计并制作了光强调制度和频率可调的发光二极管驱动电路,应用这种激励源激发荧光样品Eu₂L′3·nH₂O(L′=C₄H₄O₄),测量了激发光和Eu3+离子的5D₀—7F₂发射光的波形。实验得到的数据用按照相位法测量荧光寿命的原理用非线性最小平方曲线拟合,得到Eu3+离子激发态5D₀的寿命约为0.680 ms。讨论了光源调制中的高次谐波分量对测量结果的影响以及寿命具有一定分布的多指数衰减体系的测量和处理方式,提出应用傅里叶级数展开处理数据的修正方法,以扩大相位法测量荧光寿命的适用范围,得到更准确的荧光寿命值。