原油溶胶-凝胶等温转变过程中的流变性研究

使用RS75流变仪，采用小振幅振荡剪切方法和稳态剪切方法对含蜡原油在溶胶 -凝胶等温转变过程中的流行了研究．结果表明，等温转变成的凝胶原油的结构在 很大程度上决定于预剪切速率，非牛顿含蜡原油在结构恢复过程中表现出不可逆的 触变特性．而凝胶原油在外力作用下向溶胶状态转变的过程中，要经历从线性粘弹 性变形，到非线性粘弹性变形，再到结构屈服的过程，且高剪切应力下的溶胶原油 结构与预剪切速率无关．     

Tetra(μ3-hydroxo)hexa(μ2-carboxylato-O,O′)-bridged tetranuclear terbium(III) cubane complex

A novel tetranuclear terbium(III) complex [Tb₄(OH)₄(pybet)₆(H₂O)₈][Tb₄(OH)₄(pybet)₆(H₂O)₇ (NO₃)](ClO₄)₁₄·6H₂O has been synthesized and shown by X-ray crystallography to have a cubane-like Tb₄(μ₃-OH)₄(μ₂-carboxylato-O,O′)₆ core. The ligand pybet is pyridinoacetate, C₅H₅⁺N-CH₂CO₂⁻. Magnetic susceptibility data were measured for this Tb₄ complex in the range of 2.0–320 K and in fields of 1.0 G to 50.0 kG. It is concluded that either there is very weak antiferromagnetic exchange interaction (J = −0.015 cm⁻¹) or there is a small crystal-field splitting of the ⁷F₆ Tb^III ground state.     

Synthesis and Magnetic Properties of Fe（Ⅱ） and Nd（Ⅲ） Complexes of Poly（N-2-thiazolylacrylamide）

N-2-Thiazolylacrylamide （NTA） was polymerized by a radical route to obtain the polymer in good yield. The polymer with a pendent heterocyclic group is soluble in common organic solvents, which allow to prepare the corresponding metal complexes with higher loads easily. FTIR, ^1H NMR, elemental analysis, and energy-dispersive X-Ray spectroscopy （EDX） were applied to characterize these materials. The magnetic behavior of Fe（Ⅱ） and Nd（Ⅲ） complexes of poly（N-2-thiazolylacrylamide） was examined by a PPMS-9T magnetometer, exhibiting the characteristics of a soft ferromagnet. It is found that the Nd（Ⅲ） complex has an extremely high relative saturation magnetization of 35 emu/g.     

基于氮化碳复合材料磁性固相萃取结合高效液相色谱法测定尿液中3种羟基多环芳烃

建立了测定尿液中3种羟基多环芳烃的氮化碳复合材料磁性固相萃取结合高效液相色谱-荧光检测法。所构筑的磁性氮化碳材料，经扫描电子显微镜、X射线衍射仪、振动样品磁强计和比表面积分析仪表征后，用于尿液中3种羟基多环芳烃的富集净化。考察了吸附剂用量、吸附时间、洗脱溶液和洗脱体积（单次洗脱体积×洗脱次数）对萃取效率的影响。结合高效液相色谱-荧光分析，在0.25~250 μg/L范围内线性关系良好（相关系数r=0.999），3种羟基多环芳烃的检出限和定量限分别为0.08和0.25 μg/L，回收率为90.1%~102%，日内和日间精密度分别为1.5%~7.7%和2.2%~8.7%。该本方法简单、快速、高效，可用于尿液中羟基多环芳烃的分析。     

Thermal properties of rare earth dodecaborides

We have measured heat capacity and thermal expansion of rare earth dodecaborides REB₁₂ (RE=Y, Tb-Tm, Lu). YB₁₂ and LuB₁₂ are diamagnetics whereas the other dodecaborides are ordered antiferromagnetically. The amplitude of the heat capacity discontinuity at the Néel temperature and the shape of the heat capacity variation in the critical region for all these antiferromagnetics are characteristics for amplitude-modulated magnetic structures. In the ordered state TbB₁₂ reveals two first-order phase transitions, most likely due to magnetic structure changes. The heat capacity of ErB₁₂ just below the Néel point shows an anomaly of unclear origin. From the Schottky contribution to the heat capacity we have determined crystal field parameters. They are completely different than that is estimated from Point Charge Model.     

THERMAL PROPERTY, MISCIBILITY AND CRYSTALLIZATION BEHAVIOR OF POLY（3-HYDROXYBUTYRATE-co- 3-YDROXYHEXANOATE） AND POLY（BUTYLENE SUCCINATE-ADIPATE） （PHBHHX/PBSA） BLENDS

Blends of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and poly(butylene succinate-adipate) (PBSA), both biodegradable semicrystalline polyesters, were prepared with the ratio of PHBHHx/PBSA ranging from 80/20 to 20/80 by melt mixing method. Differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), dynamic mechanical thermal analysis (DMA), polarizing optical microscopy (POM) and wide angle X-ray diffractometer (WAXD) were used to study the miscibility and crystallization behavior of PHBHHx/PBSA blends. Experimental results indicate that PHBHHx is immiscible with PBSA as shown by the almost unchanged glass transition temperature and the biphasic melt.     

Rheological properties of multisticker associative polyelectrolytes in semidilute aqueous solutions

Multisticker associative polyelectrolytes of acrylamide (≈86 mol %) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (≈12 mol %), hydrophobically modified with N,N‐dihexylacrylamide groups (≈2 mol %), were prepared with a micellar radical polymerization technique. This process led to multiblock polymers in which the length of the hydrophobic blocks could be controlled through variations in the surfactant‐to‐hydrophobe molar ratio, that is, the number of hydrophobes per micelle (N_H). The rheological behavior of aqueous solutions of polymers with the same molecular weight and the same composition but with two different hydrophobic block lengths (N_H = 7 or 3 monomer units per block) was investigated as a function of the polymer concentration with steady‐flow, creep, and oscillatory experiments. The critical concentration at the onset of the viscosity enhancement decreased as the length of the hydrophobic segments in the polymers increased. Also, an increase in the N_H value significantly enhanced the thickening ability of the polymers and affected the structure of the transient network. In the semidilute unentangled regime, the behavior of the polymer with long hydrophobic segments (N_H = 7) was studied in detail. The results were well explained by the sticky Rouse theory of associative polymer dynamics. Finally, the viscosity decreased with an increase in the temperature, mainly because of a lowering of the sample relaxation time. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1640–1655, 2004     

磁性纳米标记检测技术在生物医学即时检测领域的研究进展

基于磁性纳米材料的磁标记检测技术具有灵敏度高、线性范围广、信号检测便捷等优点。由于生物样品自身磁背景信号极低,相比于光学标记检测技术,磁标记检测技术在蛋白质、核酸、细胞、病原体及生物组织检测中均表现出更高的灵敏度,在生物医学即时检测领域展现了良好的应用前景。该文围绕磁性纳米粒在即时检测领域的最新研究进展,重点介绍了其在蛋白质、核酸以及几类病原体检测方面的应用,并对基于磁性纳米粒的即时检测技术发展方向及应用前景进行了展望。     

一种低磁矩、大功率复合稀土石榴石铁氧体的工艺和性能研究

为满足低场区几百兆赫的超大功率器件的性能要求,以钇铁石榴石铁氧体为基础,制备了一种低磁矩复合稀土石榴石铁氧体YGd CaVInIG,研究了少量Mn3+替代Fe3+和预烧温度、烧结温度对铁氧体性能和结构的影响。实验表明,以少量Mn3+替代Fe3+可以提高铁氧体电阻率,降低磁损耗和介电损耗。Mn3+掺入量以x为0.04～0.06比较合适,铁氧体最佳予烧温度为1050℃,最佳烧结温度1350～1380℃,保温5h,氧气中烧结,其性能为:4πMs=500±10%kA·m-1,ΔH=5.25～5.55kA·m-1,TC>180℃,tgδe≤0.5×10-5,这种材料适合微波低频段器件性能要求。X射线衍射分析指出,掺Mn3+的YGdCaVInIG铁氧体相变完全,呈单相复合石榴石铁氧体,空间群为I230,点阵常数1.25057～1.25101nm,单胞分子数n为7.75～7.80。     

活性酚醛树脂中羟甲基含量的测定

本文提出一种酚醛树脂中羟甲基含量的化学分析法，分别以＾１３ＣＮＭＲ和化学分析法测定酚醛树脂的羟甲基含量。将两种测试结果与已知的投料量进行比较，证明所建立的化学分析法可行。