2-甲基-6-乙酰基萘结构的表征

2-甲基-6-乙酰基萘是一种有发展前景的化工产品。本实验在合成和精制的基础上,采用气相色谱、质谱、^1H、^13C及二维核磁共振技术表征了2-甲基-6-乙酰基萘的结构,首次给出了该化合物的化学位移数据。     

Assembly of MOF Microcapsules with Size‐Selective Permeability on Cell Walls

The assembly of metal–organic frameworks (MOFs) into microcapsules has attracted great interest because of their unique properties. However, it remains a challenge to obtain MOF microcapsules with size selectivity at the molecular scale. In this report, we used cell walls from natural biomaterials as non‐toxic, stable, and inexpensive support materials to assemble MOF/cell wall (CW) microcapsules with size‐selective permeability. By making use of the hollow structure, small pores, and high density of heterogeneous nucleation sites of the cell walls, uniform and continuous MOF layers could be easily obtained by inside/outside interfacial crystallization. The prepared MOF/CW microcapsules have excellent stability and enable the steady, slow, and size‐selective release of small molecules. Moreover, the size selectivity of the microcapsules can be adjusted by changing the type of deposited MOF.     

基于巯基功能化磁球的磁固相萃取-ICP-MS联用用于环境水样中无机砷形态分析

该文制备了一种可在pH 5.0~9.0范围内选择性吸附As(Ⅲ)的巯基（—SH）修饰的环氧基改性磁性纳米材料（Fe3O4@SiO2@GMA—S—SH MNPs）,将其与新型MSPE-ICP-MS联用实现了水中As(Ⅲ)和As(Ⅴ)的分离分析,As(Ⅴ)经Na2S2O3/KI还原后,采用MSPE-ICP-MS测得总砷含量,然后通过差减法计算。结果显示,方法对As(Ⅲ)的检出限（LOD）为1.5 ng·L-1,富集倍数为150倍,线性范围为5~3 000 ng·L-1,相对标准偏差（RSD）（c=10 ng·L-1,n=7）为9.6%。将该方法用于水质标准样品（GSB07-3171-2014）中无机砷形态分析,测定结果与参考值一致。采用该方法测定自来水As(Ⅲ)和As(Ⅴ)的含量分别为0.036、0.043 μg·L-1,湖水中含量分别为0.24、0.43 μg·L-1,加标回收率为80.9%~101%,RSD为1.5%~10%。该方法具有检出限低、富集倍数大、吸附/解吸动力学快、抗干扰能力强等优点,可用于实际水样中无机砷的形态分析。     

ParaHydrogen Polarized Ethyl-[1-13C]pyruvate in Water,a Key Substrate for Fostering the PHIP-SAH Approach to Metabolic Imaging

An efficient synthesis of vinyl-[1-¹³C]pyruvate has been reported, from which ¹³C hyperpolarized (HP) ethyl-[1-¹³C]pyruvate has been obtained by means of ParaHydrogen Induced Polarization (PHIP). Due to the intrinsic lability of pyruvate, which leads quickly to degradation of the reaction mixture even under mild reaction conditions, the vinyl-ester has been synthesized through the intermediacy of a more stable ketal derivative. ¹³C and ¹H hyperpolarizations of ethyl-[1-¹³C]pyruvate, hydrogenated using ParaHydrogen, have been compared to those observed on the more widely used allyl-derivative. It has been demonstrated that the spin order transfer from ParaHydrogen protons to ¹³C, is more efficient on the ethyl than on the allyl-esterdue to the larger J-couplings involved. The main requirements needed for the biological application of this HP product have been met, i. e. an aqueous solution of the product at high concentration (40 mM) with a good ¹³C polarization level (4.8 %) has been obtained. The in vitro metabolic transformation of the HP ethyl-[1-¹³C]pyruvate, catalyzed by an esterase, has been observed. This substrate appears to be a good candidate for in vivo metabolic investigations using PHIP hyperpolarized probes.     

Effect of surface oxidation on the surface condition and deuterium permeability of a palladium membrane

Oxidation and deoxidation of a Pd membrane was conducted in a quartz tube oven in a temperature range of 23-500 °C. The micromorphology and chemical composition of the Pd membrane surface was characterized using scanning electronic microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Micropores and PdO began to form on the Pd membrane surface after oxidation at 240 °C for 1 h and their quantity increased gradually with increasing temperature. A rough Pd membrane surface was obtained when the temperature rose to 500 °C. The PdO on the Pd membrane surface was completely deoxidized once more using H₂ at room temperature, but the rough surface morphology caused by oxidation remained. The deuterium permeability of the Pd membrane was tested using special equipment in the China National Key Laboratory and the results indicated that the rough Pd membrane surface had higher deuterium permeability than the original membrane. The improved deuterium permeability could be attributed to the higher Pd membrane surface area, which provided deuterium atoms with more adsorption sites and dissociation sites.     

Electromagnetic form factors of nucleons in a relativistic square-root potential model of independent quarks

The nucleon electromagnetic form factorsG _E ^P (q²),G _M ^P (q²) and the axial-vector form factor G_A(q²) are studied in a relativistic model of independent quarks confined by an equally mixed scalar-vector square root potentialV _q(r)=1/2(1+γ ⁰)(ar ^1/2+ν ₀) taking into account the appropriate centre-of-mass corrections. The respective root-mean-square radii associated withG _E ^P (q²) and G _A (q²) come out as [〈r ²〉 _E ^P ]^1/2=0.86 fm and 〈r _A ² 〉^1/2=0.88 fm. Restoration of chiral symmetry in this model is discussed to derive the pion-nucleon form factorG _πNN(q²) and consequently the pion-nucleon coupling constant is obtained asg _πNN(q²)=12.81 as compared tog _πNN(q²)_exp⋍13.     

磁场下含结构缺陷多组分超晶格中的局域电子态和电子输运

在有效质量近似理论下，利用转移矩阵和有效垒高方法研究了有限磁场下含结构缺陷的多组分超晶格中局域电子态的性质.在考虑各组分层有效质量的失配时，外加磁场会导致磁耦合效应的出现.磁耦合效应不仅引起局域电子能级的量子化，并且随着朗道指数或磁场强弱的变化，局域能级及其局域程度都会发生显著移动，特别是对高能区域的局域电子态影响更大.此外，还计算了电子输运系数，讨论了含结构缺陷的三组分超晶格中局域电子能级与输运谱透射禁区中的共振透射峰的关系，发现两者之间有着很好的对应关系，为相应的实验研究提供了依据. 关键词： 超晶格 局域电子态 磁场     

磁共振现代射频脉冲理论在非均匀场成像中的应用

在磁共振非均匀场成像中，传统的射频脉冲导致回波信号的衰减.为了减小和消除这种磁共振信号的衰减，在讨论了经典理论的基础上根据非线性动力学中的逆散射理论和Shinnar-Le Roux方法导出了用于非均匀场成像的射频脉冲设计方法.模拟结果表明，采用逆散射理论和Shinnar-Le Roux方法优化的脉冲序列可以明显提高信号的信噪比. 关键词： 磁共振成像 射频脉冲 非线性系统     

三维光晶格中玻色凝聚气体基态波函数及干涉演化

基于Gross-Pitaevskii方程，运用有效化学势概念，研究了囚禁在组合势(由磁阱和三维光 晶格组成)中玻色凝聚气体在三维光晶格中的分布规律，并由此得到玻色凝聚气体的归 一化基态波函数.在取消组合势和仅取消光晶格而保留磁阱的两种情况下，运用传播子方 法求解出玻色凝聚气体密度分布的解析表达式.取消组合势后，理论计算所得到的玻色凝聚 气体聚随时间的演化规律与Greiner等的实验结果相一致.仅取消光晶格而保留磁阱时，研 究表明玻色凝聚气体的干涉模式呈现周期性的振荡行为.此外，在磁阱为各向异性的情况下 ， 关键词： 玻色凝聚气体 磁阱 光晶格 干涉模式     

4英寸热氧化硅衬底上磁性隧道结的微制备

就如何在4英寸热氧化硅衬底上沉积高质量的磁性隧道结纳米多层薄膜材料和如何利用光刻方法微加工制备均匀性较好的磁性隧道结方面做了初步研究，并对磁性隧 道结的磁电性质及其工作特性进行了初步测量和讨论.利用现有的光刻设备和工艺条 件在4英寸热氧化硅衬底上直接制备出的磁性隧道结，其结电阻与面积的积 矢的绝对误差在10% 以内，隧穿磁电阻的绝对误差在7% 以内，样品的磁性隧道结性质具有较好的均匀性和一致性，可以满足研制磁随机存储器存储单元演示器件的基本要求. 关键词： 磁性隧道结 隧穿磁电阻 磁随机存储器 4英寸热氧化硅衬底