Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

A purely algebraic characterization of the hyperreal numbers

The hyperreal numbers of nonstandard analysis are characterized in purely algebraic terms as homomorphic images of a suitable class of rings of functions.

     

Heavy metal ion uptake properties of polystyrene-supported chelating polymer resins

Metal ion uptake properties of polystyrene-supported chelating polymer resins functionalized with (i) glycine, (ii) hydroxy benzoic acid, (iii) Schiff base and (iv) diethanol amine have been investigated. The effects of pH, time and initial concentration on the uptake of metal ions have been studied. The uptake of metal ion depends on pH. The resins are more selective at pH 10 for Pb(II) and Hg(II), whereas at pH 6 they are found to be Cd(II) and Cr(VI) selective. Metal ion uptake properties of resins follow Freundlich’s equation. The resins are recyclable and are therefore employed for the removal of heavy metal pollutants from industrial waste water.     

超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯复合材料的输运性质

采用热压法获得了具有不同混合比例的超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯导电复合材料,并利用x射线衍射、扫描电子显微镜和标准四引线方法对复合材料的结构和低温电输运性质进行测量.实验结果显示,超导氧化物La1.85Sr0.15CuO4颗粒随机分布在聚合物本体中,相互间没有连接构成网络结构.在正常态下,复合材料的电阻-温度变化曲线给出类半导体行为.但对应于超导氧化物La1.85Sr0.15CuO4的超导转变温度Tc处,复合材料的电阻-温度变化曲线出现了极小值.室温下电阻率ρ随外加电场强度E的变化曲线测量结果表明,ρ-E曲线为一线形关系,随着电场强度E增加,电阻率ρ下降.文中对可能存在的导电机制进行分析,结果表明隧道贯穿模型可以很好地解释复合材料的导电机制.另外,外加电场强度E对复合材料的电输运特性有明显的影响.     

Extremely large binding energy of biexcitons in an organic-inorganic quantum-well material (C4H9NH3)2PbBr4

We have confirmed biexciton formation in an organic-inorganic hybrid quantum-well material (C₄H₉NH₃)₂PbBr₄ by photoluminescence and two-photon absorption measurements. The biexciton has extremely large binding energy, 60 meV, which to our knowledge is the largest value ever reported for a semiconductor. By analyzing the spectrum of biexciton luminescence, the biexciton gas temperature was found to be much higher than the bath temperature due to a higher local temperature arising from the large biexciton binding energy.     

Ab initio X-ray powder diffraction characterisation of molecule-based magnetic materials

Use of ab initio X-ray powder diffraction (XRPD) methods in the study of magnetically active species of covalent nature is presented. Selected cases are chosen in order to underline the power of XRPD methodologies, highlighting the importance of independent physico-chemical information from ancillary techniques.     

Optical and conductive properties of AlSi-alloy/SiCp composites: application in modelling CO2 laser processing of composites

The optical properties—reflectivity, real part of the refractive index, absorption coefficient as well as the thermal and electrical conductivity of AlSi-alloy/SiC_p composite were measured. The optical parameters and both conductivities decreased with the increase of SiC_p particles volume in AlSi-alloy matrix. This decrease was almost linear for the volume fraction of SiC_p particle up to 10 vol% of the total mass of the composite. For the 15 vol% of SiC_p particles, the departure from linearity is connected with the presence of additional phases in AlSi-alloy/SiC_p composite materials. The measured temperature dependencies of optical reflectivity and electrical conductivity for AlSi-alloy/SiC_p 15 vol% are of metallic character. Modelling of the interaction of the CO₂ laser radiation with AlSi-alloy/SiC_p 15 vol% composite should allow to estimate the initiation time at which the surface composite reaches melting temperature.     

Zur Synthese und Struktur von K3N

Synthesis and Structure of K₃N Two phases in the binary system K/N have been obtained via co‐deposition of potassium and nitrogen onto polished sapphire at 77 K and subsequent heating to room temperature. The powder diffraction pattern of one of these phases can be satisfactorily interpreted by assuming the composition K₃N, and the anti‐TiI₃ structure‐type, which is also adopted by Cs₃O. The resulting hexagonal lattice constants are: a = 779.8(2), c = 759.2(9) pm, Z = 2, P6₃/mcm. Comparison with possible structures of K₃N generated by computational methods and refined at Hartree‐Fock‐ and DFT level, reveals that the energetically most favoured structure has not formed (presumable Li₃P‐type), but instead one of those with very low density. In this respect, the findings for K₃N are analogous to the results on Na₃N. The thermal evolution of the deposited starting mixture has been investigated. Hexagonal K₃N transforms to another K/N phase at 233 K. Its XRD can be fully indexed resulting in an orthorhombic cell a = 1163, b = 596, c = 718 pm. Decomposition leaving elemental potassium as the only residue occurs at 263 K.     

Investigation of the effect of CdCl2 processing on vacuum deposited CdS/CdTe thin film solar cells by DLTS

Thin film CdS/CdTe solar cells have been prepared by conventional vacuum deposition technique. Deep level transient spectroscopy (DLTS), temperature and frequency dependent capacitance-voltage (C-V) measurements were utilised to investigate the performance limiting defect states in the CdTe layer subjected to the post deposition treatments such as CdCl₂-dipping and/or annealing in air. Five hole traps, all of which have been previously reported in the literature, were identified in as-grown CdTe at 0.19, 0.20, 0.22, 0.30 and 0.40 eV above the valence band. A single hole trap level has been evidenced at 0.45 eV after both post deposition heat and CdCl₂ treatments.     

Moment vanishing properties of harmonic Bergman functions

We show that Poisson integrals belonging to certain weighted harmonic Bergman spaces b_δ^p on the upper half-space must have the moment vanishing properties. As an application, we show that b₀^p, p?1, contains a dense subspace whose members have the horizontal moment vanishing properties. Also, we derive related weighted norm inequalities for Poisson integrals. As a consequence, we obtain a characterization for Poisson integrals of continuous functions with compact support in order to belong to b_δ^p.