一种基于耗散能计算的高周疲劳参数预测方法

在热力学框架下,基于薄板假设,建立金属材料薄板试样在高周疲劳载荷作用下的热传导方程,将试样温度场数据和实时载荷信号导入,准确计算与高周疲劳损伤相关的单个循环内耗散能. 基于该方法,以316L不锈钢材料为例,通过实时监测试样不同应力水平下高周疲劳破坏全过程中耗散能的变化,拟合出耗散能-疲劳寿命曲线,呈现与传统的应力-疲劳寿命曲线相同的规律;提出一种新的预测高周疲劳极限的能量法,确定的疲劳极限与实验值相近.     

稀土上转换发光材料标记抗体的制备及在免疫组化中的应用

采用微波辐射法合成了具有上转换发光特性的六方相纳米粒子NaGdF₄: Yb³⁺,Er³⁺(UCNPs), 其晶粒大小约为65 nm, 且粒子在980 nm的激发光下显示绿光(550 nm). 进一步在NaGdF₄: Yb³⁺,Er³⁺纳米晶的表面包覆了一层二氧化硅层, 进行氨基功能化后获得了表面共价结合氨基基团的粒径为70 nm的上转换发光纳米微球NaGdF₄: Yb³⁺,Er³⁺@SiO₂-NH₂(UCNPs@SiO₂-NH₂). 通过共价键将UCNPs@SiO₂-NH₂与多克隆抗体免疫球蛋白联接, 将标记后的多克隆抗体应用于传统的免疫组化检测子宫内膜腺细胞中基质金属蛋白酶组织抑制剂-4(TIMP-4)蛋白的表达. 结果表明, 微波合成的稀土上转换发光纳米材料形貌规则且粒径均一, 包覆硅壳后材料具有良好的分散性和水溶性, 荧光强度高且稳定, 在980 nm激发光下对生物组织无背景荧光, 可以很好地检测组织中蛋白质的表达.     

In3+共掺杂诱导NaY0.95-xYb0.03Er0.02F4相转变与上转换发光增强研究

引入In³⁺作为新的掺杂离子通过水热法合成了In³⁺与Er³⁺,Yb³⁺共掺杂的NaYF₄上转换发光材料. 通过XRD表征及Rietveld精修,SEM以及TEM研究了In掺杂引起的NaYF₄形貌与晶体结构的变化. 通过发射光谱与发光衰减曲线表征了掺杂NaYF₄的上转换发光性能,以研究晶体微观结构与上转换发光性能之间的关系. 结果表明随着In掺杂量的增加,立方相NaYF₄的晶格畸变不断增强且发生由立方相向六方相的转变. 对于六方相NaYF₄,其上转换发光强度随着In含量的提高不断增强并当In含量为3%时达到最大值. 该研究结果可以有助于设计与合成具有优良上转换发光性能的材料.     

Intense up-conversion emissions of Yb3+/Dy3+ co-doped Al2O3 nanopowders prepared by non-aqueous sol—gel method

Yb³⁺/Dy³⁺ co-doped Al₂O₃ nanopowders have been prepared by the non-aqueous sol-gel method and their up- conversion photoluminescence spectra are measured under excitation by 980-nm semiconductor laser. The results show that there are comparatively abundant spectra of up-conversion emissions centered at 378, 408, 527 and 543, and 663 nm, corresponding to ⁴G_9/2 → ⁶H_13/2, ⁴G_9/2 → ⁶H_11/2, ⁴I_15/2 → ⁶H_13/2, and ⁴F_9/2 → ⁶H_11/2 transitions of Dy³⁺, respectively. Two-photon and three-photon processes are involved in ultraviolet, violet, green, and red up-conversion emissions. The energy transition between Yb³⁺ and Dy³⁺ is discussed.     

Transition probabilities and lifetimes of the low-lying levels of Fe XIV

The multi-configuration Dirac-Fock method is employed to calculate the transition energies,probabilities,and oscillator strengths for electric dipole allowed(E1) and forbidden(M1,E2,M2) lines for the 3s23p,3s3p2,3s23d,3p3,and 3s3p3d configurations of Fe XIV.The lifetimes of all 40 levels of these low-lying configurations are also derived.The valence-valence and core-valence correlation effects are accounted for in a systematic way.Breit interactions and quantum electrodynamics(QED) effects are estimated in subsequent relativistic configuration interaction(CI) calculations.The present results are in good agreement with other available theoretical and experimental values,and therefore can be used for the further astrophysical investigations.     

Theoretical study of potential energy curves,spectroscopic constants,and radiative lifetimes of low-lying states in SeO molecule

The low-lying potential energy curves of SeO molecule are computed by means of ab initio multireference configuration interaction technique, taking into account relativistic (scalar plus spin-orbit coupling) effects. The spectroscopic constants of Ω states for X³Σ^-, a¹Δ, b¹Σ⁺, A³Π, A'³Δ, and A"³Σ⁺ states are obtained, and they are in good accordance with available experimental values. The Franck-Condon factors and transition dipole moments to the ground state are computed, and the natural radiative lifetimes of low-lying Ω states are theoretically obtained. Comparisons of the natural lifetimes of Ω states with previous experimental results and those of isovalent TeO molecule are made.     

Effect of KOH molarity and annealing temperature on ZnO nanostructure properties

In this work, ZnO nanorods (NRs) were fabricated using a low cost chemical bath deposition (CBD) method. The effect of the potassium hydroxide concentration on the fabricated ZnO nanostructures was studied in depth. The optical, structure, and surface morphology properties of the fabricated ZnO nanostructures were investigated using Uv-vis spectroscopy, XRD, and SEM. The results indicate that the formation of hexagonally structured ZnO nanorods with different lengths and diameters was dependent on the KOH concentration. The sample prepared with 2 M of KOH was the best one for optoelectronic applications, since it has the smallest diameters. This sample was annealed at different temperatures (473 K–1073 K). Positron Annihilation Lifetime Spectroscopy was used to determine the defects in the ZnO nanorods. The results show that the positron mean lifetime (τ_m) decreased as the annealing temperature increased, which means that the overall defects in the ZnO nanorods decreased with increasing temperature. Consequently, higher performance semiconductor devices based on ZnO nanorods could be fabricated after high annealing of the ZnO nanorods.     

Mn2+离子掺杂的NaTaOGeO4:Tb3+的发光性能

采用高温固相法制备了颜色可调的NaTaOGeO₄∶Tb³⁺,Mn²⁺荧光粉,并研究了其发光特性以及能量传递机理。在244 nm激发下,NaTaOGeO₄∶Tb³⁺的发射光谱的发射峰分别位于380,413,436,492,544 nm,分别属于Tb³⁺的⁵D₃→⁷F_J和⁵D₄→⁷F_J（J=6,5,4）能级跃迁,为蓝光和绿光发射。在280 nm波长激发下,在492 nm和544 nm处有较强的发射峰,分别属于Tb³⁺的⁵D₄→⁷F₆、⁵D₄→⁷F₅能级跃迁,为绿光发射。在248 nm波长激发下,NaTaOGeO₄∶Mn²⁺的发射光谱由位于576 nm处的宽带组成,属于Mn²⁺的⁴T₁→⁶A₁能级跃迁。当在NaTaOGeO₄∶Tb³⁺荧光粉中共掺杂Mn²⁺时,可以同时观察到Mn²⁺和Tb³⁺的发射峰,通过改变浓度掺杂比,可以得到颜色可调控的荧光粉。     

阴离子取代合成Sr3LaAxV3-xO12:Eu3+(A=Mo,W)白光荧光粉

通过高温固相法合成Sr₃LaA_xV_3-xO₁₂:Eu³⁺（A=Mo,W）荧光粉,利用MoO₄^2-和WO₄^2-取代基质中部分VO₄^3-,改变基质组成和结构,进而影响基质和激活剂Eu³⁺离子的发光性能。采用X射线衍射（XRD）、扫描电子显微镜（SEM）和荧光分光光度计对所合成样品的物相、形貌、荧光性能及荧光寿命进行表征。研究表明,MoO₄^2-和WO₄^2-的部分掺杂对基质发光位置和强度均有影响,能明显减弱VO₄^3-的发光,但对Eu³⁺离子发光影响不大,添加电荷补偿剂F^-可以加强VO₄^3-对Eu³⁺离子的能量传递。通过调整基质VO₄^3-发光和Eu³⁺离子发光,可以得到单一基质的白光荧光粉。初步探讨了阴离子掺杂对Eu³⁺离子红光发射增强的机理。     

基于CdSe@ZnS量子点水溶性纳米粒子的制备及荧光性能

作为一种新型的荧光探针,量子点（QD）已经受到越来越多的重视,制备工艺也显得格外重要。水相中合成的量子点效率低,油相中的量子点经过转相以后效率也大大衰减。本论文利用再沉淀包覆的方法制备了具有良好的水溶性的掺杂绿光CdSe@ZnS的纳米颗粒G-NPs（534 nm）和掺杂红光CdSe@ZnS的纳米颗粒R-NPs（610 nm）,具有窄的半峰宽（G-NPs~29 nm,R-NPs~31 nm）,较小的粒径（45 nm）,并在此基础上通过发射光谱与荧光衰减研究了量子点之间的能量传递现象。该方法保留了量子点原来的性质,基于其优良的光学性质,对人类肝细胞肝癌细胞株（HepG2）进行了荧光标记,从共聚焦成像实验结果看出,纳米颗粒得到了良好的吞噬效果。