Synthesis and red luminescence of Pr-doped CaTiO3 nanophosphor from polymer precursor

Uniform and sphere-like nanoparticles of crystalline Pr³⁺-doped CaTiO₃ have been prepared from complex polymer precursor at 600°C, in which, metal atoms are previously dispersed by citric acid in ethylene glycol solvent. The decomposition process of the precursor, crystallization, and particle sizes of CaTiO₃ have been investigated by using thermal analysis, powder X-ray diffraction and transmission electron microscopy. Diffuse reflectance spectra, photoluminescence and decay curve indicate that a strong red emission located at the nearly NTCS “ideal red” site is deduced from the energy transfer from the band gap absorption to doping Pr³⁺ ions. The thermoluminescence curves exhibit that a potential long phosphorescent material based on Pr³⁺-doped CaTiO₃ will be explored in future.     

新型陶瓷材料的光激励发光性质研究

针对以往电子俘获光存储材料存在的问题，利用高温固相反应发制备了一种Eu^2 掺杂的氟氧化物玻璃陶瓷，研究表明在该材料中具有光激励发光(PSL)特性，并可用于电子俘获光存储。XRD分析表明该材料含有大量的BaF2微晶。根据其与BaF2相似的发光特性，推断玻璃陶瓷的PSL有可能来源于微晶中Eu^2 的5d-4f发射。但是决定光激励发光过程中的电子(空穴)陷阱的存在方式、电子迁移途径都有待进一步探讨的问题。与传统的BaFCl：Eu相比，这种材料的光激励发光衰减速度较慢。     

Dynamics of excited m-dichlorobenzene

Dichlorobenzene is a precursor molecule of di-oxins, which are some of the most toxic chemicals and are suspected of being mutagenic with the structure of benzene rings containing different numbers of chlorine atoms. They are seriously harmful to the health of human. Therefore, it is necessary to study these aryl chemicals especially dichlorobenzene molecules in great detail. In recent years, a number of groups have investi-gated the molecules of aryl halide. The near ultraviolet absorption sp…     

稀土掺杂的(K, Sr)Cl·SiO2复合凝胶的荧光性能

采用sol gel法制备了单掺铕及共掺铕、铈的(K,Sr)Cl·SiO2复合凝胶,研究了复合凝胶的荧光性能。根据荧光测试结果,复合凝胶中,Eu3+在没有还原剂的作用下,可以与基质作用形成还原态的Eu2+,复合凝胶表现出相应的Eu2+荧光性能;研究认为,Ce3+,Eu3+共掺杂时,复合凝胶激发光谱与发射光谱峰位基本不变,但强度有所不同。330nm处的激发光谱明显增强,且发射光谱随Ce3+的掺杂量增加而增强。当Ce3+掺杂浓度为3.0%(原子分数)时,复合凝胶具有最大的荧光发射强度,表明Ce3+具有很好的敏化作用。在Ce3+,Eu3+共掺杂复合凝胶体系中,复合凝胶荧光强度增大的原因既可能是电子转移过程,也可能是Ce3+→Eu2+的能量传递过程所致。     

Lifetimes and Quenching of the Ā 2A′(υ3′ = 0 – 2) → X̄ 2A″ Fluorescence of HSO

Fluorescence lifetimes of vibrational levels of the first electronically excited state (ā ² A′) of HSO, determined by the technique of discharge flow and laser-induced fluorescence, are 81 ± 10, 74 ± 8, and 76 ± 14 μs for υ₃′ = 0, 1 and 2, respectively. The rate coefficients of quenching of each level by He, N₂, O₂ and O₃ were measured; the coefficients for HSO (ā, υ₃′ = 0 – 2) quenched by O₃ arc 35–50 times as great as those of HSO by He.     

YPxV1—xO4（0≤x≤1）：Dy^3＋的合成及其光谱性质的研究

本文报道了不同组成的ＹＰｘＶ１－ｘＯ４（０≤ｘ≤１）：Ｄｙ＾３＋的合成和结构。ＹＰｘＶ１－ｘＯ４（０≤ｘ≤１）为四方晶系，晶胞参数随ｘ的增大呈线性减小。基质的Ｓｔｏｋｅｓ位移随ｘ的增大逐渐变大，而激发光谱峰值则向短波方向移动。在ＹＰｘＶ１－ｘＯ４：０．００６Ｄｙ＾３＋体系中，ｘ＞０．４时出现的基质发射是由ＰＯ＾３－４引起的。基质及Ｄｙ＾３＋的发光效率和Ｄｙ＾３＋的发光强度的黄蓝比均与ｘ有关。同时探     

阳极氧化膜WO3（Ⅱ）：电显色的介质效应

用循环计时电量法、循环伏安法、电化学现场(in-situ)紫外可见反射光谱技术和光电流谱技术研究了溶剂和阳离子(H~+,Li~+)对阳极氧化膜WO_3电显色稳定性和过程的影响。从循环计时电量图可以测定表征膜稳定性的氢或锂的累积量和暂态周期数。实验发现W/WO_3/LiCLO_4乙腈溶液体系具有高的电显色稳定性。引起WO_3膜可逆电显色的H~+和Li~+离子的嵌-脱过程的界面电化学机理不同。着色态WO_3膜的色心是自由电子,其密度超过10~(21)/cm~3,生色机理是等离子体振荡。     

Eu（TTA）3·1／2（4，4′－bipyN_2O_2）配合物的发光光谱

在７７Ｋ下测定了Ｅｕ（ＴＴＡ）３·１／２（４，４′－ｂｉｐｙＮ２Ｏ２）配合物的激发光谱、发光光谱和时间分辨光谱。光谱数据表明，在标题配合物中存在化学环境不同的两种Ｅｕ３＋格位，但它们的局部对称性都属于Ｃ２Ｖ点群，这可能表明该配合物的激发态电子结构稍有不同     

Time‐Resolved Synchrotron Radiation Excited Optical Luminescence: Light‐Emission Properties of Silicon‐Based Nanostructures

The recent advances in the study of light emission from matter induced by synchrotron radiation: X‐ray excited optical luminescence (XEOL) in the energy domain and time‐resolved X‐ray excited optical luminescence (TRXEOL) are described. The development of these element (absorption edge) selective, synchrotron X‐ray photons in, optical photons out techniques with time gating coincide with advances in third‐generation, insertion device based, synchrotron light sources. Electron bunches circulating in a storage ring emit very bright, widely energy tunable, short light pulses (<100 ps), which are used as the excitation source for investigation of light‐emitting materials. Luminescence from silicon nanostructures (porous silicon, silicon nanowires, and Si–CdSe heterostructures) is used to illustrate the applicability of these techniques and their great potential in future applications.     

Photovoltaic and spectral properties of tetraphenyloporphyrin and metallotetraphenyloporphyrin dyes

Spectroscopical properties and photocurrent (or photovoltage) of tetraphenyloporphyrins and metallotetraphenyloporphyrins in nematic liquid crystal have been studied. Photoelectric response has been measured in an electrochemical cell made of the semitransparent semiconducting and golden electrodes with porphyrin dyes embedded in liquid crystal. Fluorescence, time-resolved luminescence in microsecond time scale and photoacoustic spectra have also been measured. The competition between radiative, non-radiative processes and charge transfer is discussed. It has been shown that effectivity of porphyrins for photocurrent generation depends on the presence/absence of central metal in the macrocycle of porphyrin skeleton and the kind of metal. The schematic model of the contributions of the dye molecule and semiconducting electrode in the electron transfer process is shown.