Capacitive Properties of the Binder‐Free Electrode Prepared from Carbon Derived from Cotton and Reduced Graphene Oxide

The binder‐free composite films of reduced graphene oxide (rGO ) and activated carbon derived from cotton (aCFC ) have been fabricated and used as electrodes for electrochemical capacitors (ECs ) to avoid the decrease of capacitive performance in traditional process caused by the additional binder. The optimal aCFC is prepared at 850 °C when the mass ratio of carbon and potassium hydroxide is 1 to 4. The optimal composite film prepared from the mass ratio of aCFC /GO =2/1 exhibits porous structure, and has a specific surface area of 849.6 m²•g⁻¹ and a total pore volume of 0.61 mL •g⁻¹. Based on the two‐electrode system testing in 6.0 mol/L KOH electrolyte, the optimal composite has specific capacitance of about 202 F•g⁻¹, 374 mF •cm⁻² and 116 F•cm⁻³ in terms of mass, area and volume, and shows excellent rate capability and good cyclic stability (91.7% retention of the initial capacitance after 5000 cycles). Furthermore, the assembled solid‐state ECs by using KOH /polyvinyl alcohol as electrolyte show good mechanical stability and capacitive performances after repeated bending cycles. It is proved that this method is effective to fabricate binder‐free electrodes for ECs and will open up a novel route for the reuse of waste cotton.     

光纤SPR传感器的结构、膜材与应用进展

光纤表面等离子共振(Fiber optic surface plasmon resonance,FO-SPR)传感器由于体积小、易携带、抗电磁干扰等优点在生物、化学、医学及食品领域均具有广阔的应用前景。该文综述了光纤SPR传感器的结构、膜材料及其应用进展。其中终端反射式和在线传输式是光纤SPR传感器最重要的两种结构;最常用的膜材料包括金膜、银膜、复合膜和金属纳米颗粒。基于光纤SPR的实时检测、抗干扰能力强、可多通道检测等特点展望了其未来发展与应用前景。     

二氧化硅纳米均孔膜修饰电极检测化妆水中的抗氧化剂

制备了氧化铟锡(ITO)电极支撑的二氧化硅纳米均孔膜,保留胶束模板在纳米通道内,得到二氧化硅和胶束复合膜修饰的电极,并将其用于化妆品中丁基羟基苯甲醚和叔丁基对苯二酚的电化学检测。该均孔膜孔径2.3 nm,具有精确的尺寸筛分能力;胶束尾部的碳氢长链提供了疏水微环境,能够在水溶液中快速萃取和富集疏水有机分子。该电极对两种抗氧化剂的检测均获得了较好的灵敏度、线性范围和检测限,加标回收率分别为96.4%和104%,表明该电化学传感器具有一定的应用潜力。     

预嵌锂用穿孔集流体对锂离子电容器电化学性能的影响

将石墨涂覆于传统铜箔(CCC)与穿孔铜箔(PCC)集流体表面,通过内部短路的方式进行预嵌锂处理,再以商业化的活性炭及预锂化的石墨分别为正、负极材料组装成锂离子电容器(LIC)。以PCC为集流体的LIC在0.1和2.0 A?g~(-1)的电流密度下,能量密度分别为118.2和51.7 Wh?kg~(-1),并且在0.5 A?g~(-1)的电流密度下循环1000次后的能量密度保持率为90%;以CCC为集流体的LIC在0.1和2.0 A?g~(-1)的电流密度下的能量密度分别为125.5和43.3 Wh?kg~(-1),在同等电流密度下2.0-3.8 V之间循环1000次后的能量密度保持率仅为73.2%。进一步研究表明,石墨采用PCC在预嵌锂的过程中避免了金属锂沉积,生成了均一且稳定的固体电解质膜(SEI),有效防止充放电过程中SEI膨胀,活性物质与集流体间粘结力降低,活性物质脱落等现象发生。因此,LIC通过PCC完成预嵌锂后的自放电及内阻更小,具有更佳的倍率性能和循环性能。     

银负载量对网状TiO_2柔性薄膜电极储锂性能的影响

采用水热法结合银镜反应制备出一系列不同Ag负载量(2.2%、4.0%、6.4%,w/w)改性的3D纳米网状结构Ag@Ti O2薄膜电极。利用电感耦合等离子体技术(ICP)、X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和X射线能谱(EDX)等表征手段测试所合成材料的形貌及成分,实验结果表明Ag纳米颗粒可以成功沉积在Ti O2纳米线表面。电化学测试数据则表明,4.0%(w/w)负载量的Ag@Ti O2相比于未改性和其他负载量的Ti O2纳米线具有更好的倍率性能和更稳定的可逆容量。在50,100,200,400,800和1 200 m A·g~(-1)的电流密度条件下,该改性电极的放电容量可分别达到261.4,253.7,239.5,216.5,193.1和185.1 m Ah·g~(-1),在200 m A·g~(-1)下循环80次后容量保持率仍能达到99.8%。     

Ag@AgI/Ni薄膜的制备及其模拟太阳光催化性能

采用电化学方法制备Ag@AgI/Ni表面等离子体薄膜催化剂,使用扫描电镜(SEM),X射线衍射(XRD)和紫外-可见漫反射光谱(UV-Vis DRS)对薄膜的表面形貌、晶体结构、光谱特性以及能带结构进行分析表征,在模拟太阳光照射下,把罗丹明B作为模拟污染物对薄膜的光催化活性与稳定性进行评价,采用向反应体系中加入活性物种捕获剂的方法对薄膜光催化机理进行探究。结果表明:最佳工艺下制备的Ag@AgI/Ni薄膜表面是由附着少量Ag粒子的AgI纳米晶构成。薄膜具有显著的表面等离子共振作用、优异的光催化活性和突出的光催化稳定性。光催化反应60 min,薄膜对罗丹明B的降解率(81.1%)是AgI/Ni薄膜的1.35倍,是TiO_2(P25)/ITO薄膜的1.61倍。在薄膜光催化活性基本保持不变的前提下可循环使用5次。薄膜表面纳米Ag的等离子共振对光阴极反应的活化是光催化性能提高的重要原因。提出了薄膜光催化降解罗丹明B的反应机理。     

Calix[4]arene-based fluorescent probe and the adsorption capacity of its electrospun nanofibrous film for the cesium cation as an adsorbent

Calix[4]arene-based cation receptor 1 has been synthesised by following a multi-step synthetic procedure. The fluorescence properties of 1 upon the addition of various metal ions were investigated by fluorescence spectroscopy. As a result, it was revealed that 1 displayed dramatic quenching effect upon the exposure to Cs⁺. In contrast, no significant quenching effects were observed upon the addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ag⁺, Zn²⁺ and Ni²⁺. Compound 1 was also found by Job plot to form a 1:1 complex with Cs⁺. In addition, we also prepared 1-embedded electrospun nanofibrous film (NF-1) as an adsorbent for Cs⁺. NF-1 is proved to adsorb Cs⁺ effectively from an aqueous solution, indicating that it would be usefully utilised as an adsorbent to remove Cs⁺.     

A green approach to prepare Ag NPs loaded IC/PVA polymeric film for antimicrobial applications

In this study, glyoxal-cross-linked Iota carrageenan (IC) /poly(vinyl alcohol) PVA films were prepared and loaded with silver nanoparticles via a green approach, consisting of sweet lime juice induced in-situ reduction of Ag(I) ions to nano silver within the film matrix. The formation of silver nanoparticles was confirmed using UV–visible spectrophotometry. The Ag NPs-loaded films were also characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR). The dynamic water uptake data were interpreted by the ‘Power functional model’. The films showed fair antimicrobial action against bacteria E. Coli.     

挤压油膜阻尼器-滑动轴承-柔性转子系统的动力响应分析

建立了挤压油膜阻尼器-滑动轴承-柔性转子非线性系统的动力学模型,采用Runge-Kutta法进行求解,进而对系统的稳定性和分叉行为进行了研究。仿真计算结果表明,系统能够在一定范围内保持稳定,随着转速的变化系统将会出现倍周期、准周期及混沌响应,从而为有效地控制转子的稳定运行状态提供了理论依据。     

碳化钨－镍－钴－钼－氧化铅系高温自润滑金属陶瓷材料的综合性能研究

为了扩大ＷＣ－Ｎｉ－Ｍｏ－ＰｂＯ四组元复合材料在工程实际中的应用范围，利用中频感应热压法制备了Ｗｃ－Ｎｉ－Ｃｏ－Ｍｏ－ＰｂＯ系高温自润滑金属陶瓷材料，并对其物理机械性能和摩擦学性能进行了试验研究，结果表明，含镍和钴这两组元之重量比为２的Ｗｃ－Ｎｉ－Ｃｏ－Ｍｏ＿ＰｂＯ材料的综合性能最好，即使在６００℃的高温下也具有较高的机械强度和相当好的摩擦学性能，且其在高速、重载下的摩擦磨损性能也比较好，Ｘ射线衍射分析发现，这种材料在６００℃时的摩擦表面形成了均匀分布的ＰｂＷＯ４膜，这是其在高温下具有良好自润滑性的根本原因，在烧结温度下，ＷＣ可溶解于钴相形成面心立方结构的Ｃｏ３Ｗ３Ｃ、Ｃｏ２Ｗ４Ｃ和Ｃｏ３Ｗ６Ｃ化合物，这能增强材料中金属相与陶瓷相的结合力。在自然降温冷却过程中，从钴相中析出Ｃｏ３Ｗ和元素碳，后者可与钼形成ＭｏＣ，进而形成Ｗｃ－ＭｏＣ固溶体，这既能细化ＷＣ晶粒，又能强化晶界，而且钴与镍形成的连续固溶体可以使金属相得以强化。这些都是提高材料的高温机械性能和摩擦学性能的直接原因。