空气退火对ZnS薄膜结构和光学特性的影响

采用X射线衍射、扫描电子显微镜和光致发光等技术研究了空气退火对ZnS薄膜的结构和光学特性的影响.薄膜在500℃以下退火后结晶质量得到改善,仍呈ZnS立方相结构.退火温度达到550℃时,薄膜中出现ZnO六方相结构.薄膜退火后,大气中的氧掺入薄膜中,出现ZnS-ZnO复合层.随退火温度升高,薄膜晶粒尺寸增大,透过率增加,带隙逐渐接近ZnO带隙.薄膜光致发光结果表明,复合层内ZnS和ZnO绿色发光的叠加替代了来自ZnS缺陷能级间的绿色发光.     

铅镉重金属离子在铋膜电极上的相互影响

采用原位镀铋电极的方式,以玻碳电极为工作电极,通过改变Cd2+和Pb2+的比例,考察不同Pb2+和Cd2+浓度条件下,两者同时存在时的相互影响。实验发现,Cd2+和Pb2+同时存在时,存在相互的影响,特别是对于Cd2+的检测,由于Pb2+较正的析出电位,对于Cd2+的析出有一定的辅助作用。考察了Cd2+和Pb2+单独存在时的分析性能,Pb2+沉积时间为60 s时,在1~80μg/L范围内呈线性关系,检出限为0.5μg/L;Cd2+的沉积时间为120 s,在1~25μg/L和30~200μg/L范围内有良好的线性关系,检出限为1.0μg/L。考察了铋膜电极在不同实际水样中对Pb2+和Cd2+的分析,获得了较好的一致性。     

Inclined Substrate Deposition of Nanostructured TiO2 Thin Films for DSSC Application

Nanostructured TiO₂ films were deposited onto Indium Tin Oxide (ITO) and glass substrates by dc reactive magnetron sputtering at different substrate inclination angles. The structural and optical properties of the deposited films were studied by X-ray diffraction, scanning electron microscopy and UV–Vis spectrophotometer, respectively. Dye-sensitized solar cells (DSSC) were assembled using these TiO₂ films as photoelectrodes and the effect of the substrate inclination angle in the preparing process of TiO₂ films on the DSSC conversion efficiency was studied.     

脉冲激光沉积LiMn2O4薄膜的研究

在氧气氛下采用355nm脉冲激光烧蚀制备了LiMn₂O₄薄膜,并用四极质谱和发光光谱技术考察了脉冲激光烧蚀过程及环境氧气对薄膜沉积过程的影响.质谱测定结果表明,355nm激光烧蚀LiMn₂O₄的产物主要有Li⁺、Mn⁺等离子和O₂、O、LiO₂、LiMnO、MnO及锂原子的多聚体等中性产物.不同氧气压下测定的发光光谱表明烧蚀原子在环境氧气氛中存在氧化过程.用循环伏安法和X射线衍射法对薄膜进行了表征.     

Electrochemical Characterization of a Pyrolytic Carbon Film Electrode and the Effect of Anodization

A pyrolytic carbon (PC) film electrode was fabricated by the chemical vapor deposition (CVD) method. This report deals with the preparation, characterization and electrochemical behavior of this carbon film. Cyclic voltammetry, linear sweep voltammetry, Raman spectroscopy and scanning electron microscopy were employed to characterize the electrode. Low background current and capacitance were observed and the rate of charge transfer for Fe(CN) redox couple was determined via cyclic voltammetry. Also the effect of the anodic activation on the electrochemical activity was evaluated and characterized with respect to the sequence of voltage applied to the electrode. The excellent electrochemical activity and low background current are the reasons why this electrode is attractive for electroanalysis measurements with lower detection limit.     

Tetrachlorinated Tetraazaperopyrenes (TAPPs): Highly Fluorescent Dyes and Semiconductors for Air‐Stable Organic n‐Channel Transistors and Complementary Circuits

A range of 2,9‐perfluoroalkyl‐substituted tetraazaperopyrene (TAPP) derivatives ( 1 – 5 ) was synthesised by reacting 4,9‐diamino‐3,10‐perylenequinone diimine (DPDI) with the corresponding carboxylic acid chloride or anhydride in the presence of a base. The reaction of compounds 1 – 4 with dichloroisocyanuric acid (DIC) in concentrated sulphuric acid resulted in the fourfold substitution of the tetraazaperopyrene core, yielding the 2,9‐bisperfluoroalkyl‐4,7,11,14‐tetrachloro‐1,3,8,10‐tetraazaperopyrenes 6 – 9 , respectively. The optical and electrochemical data demonstrate the drastic influence of the core substitution on the properties. All compounds are highly luminescent (fluorescence quantum yields of up to Φ=0.8). The LUMO energies of the tetrachlorinated TAPP derivatives (determined by cyclic voltammetry and computed by DFT calulations) were found to be below ?4 eV. In the course of this work the performance of TAPP derivatives in organic thin‐film transistors (TFTs) was investigated, and their n‐channel characteristics with field‐effect mobilities of up to 0.14 cm² V^?1 s^?1 and an on/off current ratio of >10⁶ were confirmed. Long‐term stabilities of 3–4 months under ambient conditions of the devices were established. Complementary inverters and ring oscillators with n‐channel TFTs based on compound 8 and p‐channel TFTs based on dinaphtho‐[2,3‐b:2′,3′‐f]thieno[3,2‐b]thiophene (DNTT) were fabricated on a glass substrate.     

双亲性希土-邻苯二甲酸正十四醇单酯-邻菲咯啉三元配合物的合成、表征、荧光特性及成膜性能

合成了双亲性的铕、铽-邻苯二甲酸正十四醇单酯-邻菲咯啉三元混配配合物，用红外光谱及差热-热重谱进行了表征。考察了发光性能。研究了它们在空气-水界面上的单分子膜行为，结果表明均具有良好的成膜行为。     

10,12—双炔廿三酸盐的LB膜特性研究

本文合成了10,12-双炔廿三酸,并用其在Si、SiO_2、CaF_2等基片上沉积了LB膜,结果表明,10,12-双炔廿三酸的镉盐成膜更稳定。这种LB膜在紫外光辐照下很快聚合,聚合前后的紫外-可见吸收光谱发生规律性的变化,并保持层状结构,等同周期稍变。通过红外吸收的二向色性分析,确定了该分子的取向。     

多孔载体上纯相MgAPO-36和CoAPO-36分子筛膜的合成与表征

<正>分子筛膜具有与常见气体和溶剂分子大小相当的规则孔道结构,良好的热稳定性和催化性能,可用于强化气体混合物分离[1-2]和膜反应过程[3-4]。到目前为止,沸石分子筛膜(如BEA、LTA和MFI型)和磷铝分子筛膜(如AEI、AFI和CHA型)相关的研究工作均有大量报道[5],但ATS型磷酸铝分子筛薄膜的合成与应用研究仍未见公开报导。     

以SBA-16为模板电沉积生长多孔氧化铁纳米线阵列

采用电化学沉积法以Mn改性的三维体心立方结构的介孔SBA-16膜为模板制备Fe纳米线.沉积Fe后的SBA-16膜以2%HF溶解SiO₂骨架,样品于550℃焙烧4 h.SEM和TEM的研究结果显示,所制备的Fe₂O₃纳米线互相平行,孔径均匀.XRD、电子衍射及HRTEM研究表明Fe₂O₃纳米线具有(多孔)单晶结构.