Influence of friction and asymmetric freeplay on the limit cycle oscillation in aeroelastic system: An extended Hénon’s technique to temporal integration

Nonlinear effects such as friction and freeplay on the control surfaces can affect aeroelastic dynamics during flight. In particular, these nonlinearities can induce limit cycle oscillations (LCO), changing the system stability, and because of this it is essential to employ computational methods to predict this type of motion during the aircraft development cycle. In this context, the present article presents a matrix notation for describing the Hénon’s method used to reduce errors when considering piecewise linear nonlinearities in the numerical integration process. In addition, a new coordinate system is used to write the aeroelastic system of equations. The proposal defines a displacement vector with generalized and physical variables to simplify the computational implementation of the Hénon’s technique. Additionally, the article discusses the influence of asymmetric freeplay and friction on the LCO of an airfoil with control surface. The results show that the extended Hénon’s technique provides more accurate LCO predictions, that friction can change the frequency and amplitude of these motions, and the asymmetry of freeplay is important to determine the LCO behavior.     

水流损失和热补偿共同作用对增强型地热系统(EGS)产能影响的研究

基于青海共和盆地-3705m地热田实测数据,结合流固耦合传热理论并运用Comsol软件,建立了离散型裂隙岩体流体传热模型。考虑水流损失和热补偿共同作用,模拟得到了开采过程中上、下岩层(盖层和垫层)为绝热不渗透、传热不渗透、渗透传热时,储层(上、下岩层和压裂层)温度场的变化特征,分析了产出流量、水流损失、产出温度、产热速率的变化规律。研究结果表明:采热过程中产出流量始终小于注入流量;产出流量增幅速率先增大后减小,最后趋于稳定,前3a产出流量增幅超过总增幅量的3/4;忽略水流损失,将高估产热速率,采热初期甚至达到考虑水流损失时产热速率的3倍以上;考虑水流损失,产热速率呈先快速上升再趋于稳定后逐渐下降的趋势,最优开采时间为3a^11a;研究上、下岩层对产出温度的影响,仅考虑传热,采热寿命延长5.43%,同时考虑渗流传热时,采热寿命延长2.71%;采热前9a,水流损失占主导作用,即流入上、下岩层水流损失对产热速率的影响高于热补偿效应,开采10a后,热补偿效应占主导作用;同时考虑水流损失和热补偿效应得到的产热速率变化规律与实际工程更为符合,建议选择低渗透能力的上、下岩层延长增强型地热系统(EGS)运行时间。     

Precise measurement and control of the pressure-driven flows for microfluidic systems

The pressure-driven device is designed and the flow rates of the microfluidic systems can be supplied by the pressure-driven flows, which can significantly reduce the flow-rate fluctuations coming from the pump source. For pressure-driven flows, the flow rates of the fluids can be predicted by measuring the pressure drop along a polytetrafluoroethylene (PTFE) tubing. Especially, by varying the geometrical parameters of the PTFE tubing, the predicted flow rates of the fluids are compared with the experimental measurements, and the testing precision of the pressure-driven flows can be obtained. Meanwhile, the dynamic characteristics of the open-loop and closed-loop control pressure-driven device are comparatively studied. Particularly, a proportional and integral (PI) controller is integrated with the closed-loop control pressure-driven device, and the effects of the parameters of the PI controller on the dynamic characteristics of the pressure-driven devices are mainly discussed. Most importantly, by improving the dynamic characteristics of the pressure-driven devices, precise measurement and control of the pressure-driven flows can be achieved for microfluidic systems.     

IDose^4迭代重建技术应用于低剂量CT肾动脉血管造影的临床分析

为探讨IDose 4迭代重建技术在低剂量CT肾动脉血管造影中的应用价值,选取205例拟行肾动脉CT血管造影患者,随机将其分为4组,A组(51例)采用管电压100 kV、管电流100 mA,碘海醇370 mg I/mL及IDose 4迭代重建技术,B组(51例)采用管电压100 kV、管电流150 mA,碘海醇270 mg I/mL及IDose 4迭代重建技术,C组(51例)采用管电压80 kV、管电流180 mA,碘海醇270 mg I/mL及IDose 4迭代重建技术,D组(52例)管电压120 kV、管电流120 mA,碘海醇370 mg I/mL及滤波反投影(FBP)重建技术。分析各组图像肾主动脉干CT值、噪声(SD)、信噪比(SNR)和噪声比(CNR),受检者接受CT有效剂量(ED)、容积CT剂量指数(CTDI vol)、剂量长度乘积(DLP)、碘摄入量以及重建图像评分差异和诊断效能。结果显示,A、B、C组重建图像评分优于D组,肾动脉主干CT值、SD、SNR、CNR均高于D组,B、C组肾动脉主干CT值、SD略低于A组。A、B、C组CTDI vol、DLP、ED均低于D组,B组CTDI vol、DLP、ED高于A组。A、B、C、D组诊断肾主动脉狭窄准确率分别为92.68%、86.49%、84.62%、82.86%。证实IDose 4迭代重建技术能降低受试者受辐射和造影剂剂量,提高成像质量,在低剂量CT肾动脉血管造影中具有较高可行性和实用性。     

Computing the topological entropy of maps of the interval with three monotone pieces

An algorithm is presented for computing the topological entropy of a piecewise monotone map of the interval having three monotone pieces. The accuracy of the algorithm is discussed and some graphs of the topological entropy obtained using the algorithm are displayed. Some of the ideas behind the algorithm have application to piecewise monotone functions with more than three monotone pieces.     

不确定中立型线性随机时滞系统的鲁棒稳定性

建立了中立型随机微分时滞方程的LaSalle不变原理,然后应用LaSalle不变原理讨论了不确定中立型随机时滞系统的随机渐近稳定和几乎必然指数稳定的代数判据, 同时给出示例说明结果的有效性．     

光谱反射率重建中代表颜色分步选取方法

光谱反射率重建一般指采用标准色卡上的颜色样本,对成像系统进行光谱表征(Spectral character-ization),进而从系统响应中精确地求出物体表面的光谱反射率.由于标准色卡的颜色样本数量较大,在实际成像系统中使用时有诸多不便.考虑到颜色样本之间存在较大冗余,可从中选出具代表性的少数样本用于光谱表征.针对已有方法未考虑实际成像系统特性的不足,文章提出了一种代表颜色的分步选取算法,即首先通过假设一个虚拟成像系统,根据全局误差最小的原则,挑选出部分最具代表性的颜色,估计出实际成像系统的光谱响应函数,然后在此基础上继续选择其余的代表颜色.实验表明,对于窄带多光谱成像系统及宽带彩色扫描仪而言,文章提出的方法在光谱精度及色度方面均明显优于先前方法.     

Finite element method for modeling radiative transfer in semitransparent graded index cylindrical medium

Both Galerkin finite element method (GFEM) and least squares finite element method (LSFEM) are developed and their performances are compared for solving the radiative transfer equation of graded index medium in cylindrical coordinate system (RTEGC). The angular redistribution term of the RTEGC is discretized by finite difference approach and after angular discretization the RTEGC is formulated into a discrete-ordinates form, which is then discretized based on Galerkin or least squares finite element approach. To overcome the RTEGC-led numerical singularity at the origin of cylindrical coordinate system, a pole condition is proposed as a special mathematical boundary condition. Compared with the GFEM, the LSFEM has very good numerical properties and can effectively mitigate the nonphysical oscillation appeared in the GFEM solutions. Various problems of both axisymmetry and nonaxisymmetry, and with medium of uniform refractive index distribution or graded refractive index distribution are tested. The results show that both the finite element approaches have good accuracy to predict the radiative heat transfer in semitransparent graded index cylindrical medium, while the LSFEM has better numerical stability.     

Hill‐climbing to Pasch valleys

Exhaustive enumeration of Steiner Triple Systems is not feasible, due to the combinatorial explosion of instances. The next‐best hope is to quickly find a sample that is representative of isomorphism classes. Stinson's Hill‐Climbing algorithm [ 20 ] is widely used to produce random Steiner Triple Systems, and certainly finds a sample of systems quickly, but the sample is not uniformly distributed with respect to the isomorphism classes of STS with ν ≤ 19, and, in particular, we find that isomorphism classes with a large number of Pasch configurations are under‐represented. No analysis of the non‐uniformity of the distribution with respect to isomorphism classes or the intractability of obtaining a representative sample for ν > 19 is known. We also exhibit a modification to hill‐climbing that makes the sample if finds closer to the uniform distribution over isomorphism classes in return for a modest increase in running time. © 2007 Wiley Periodicals, Inc. J Combin Designs 15: 405–419, 2007