A resource-saving decoding scheme of the orthogonally concatenated codes for optical transport networks in FPGA

A decoding scheme of the orthogonally concatenated codes with low resource utilizations is proposed. In the optical transport networks (OTN), forward error-correction (FEC) techniques are used to reduce the errors which occur in transmissions. Two-orthogonal-concatenated (TOC) codes are widely used in FEC techniques for their powerful error-correction capabilities based on the iterative decoding procedure. However, the framing structure is complex so the decoding procedure is more difficult than the decoding of in–out concatenated codes. And the powerful error-correction capability relies on the multi-iterative decoding processing, thus how to effectively utilize the hardware resources is a very important problem. Especially when the decoding procedure is implemented in the field programmable gate array (FPGA) devices, effective optimizations are required for the limited resources. In this paper we present an iterative decoding scheme in FPGA with low resource utilizations. As an example, an actual engineering application under the G.975.1 recommendation is given to show the efficiency of the proposed design.     

Intrinsic anisotropy of the effective acoustic properties in metafluids made of two-dimensional cylinder arrays

Within a unified theoretical framework, we extract the omnidirectional effective acoustic parameters for the metafluid consisting of isotropic fluid cylinders embedded in an isotropic fluid background. Besides the analytical formulas for the effective parameters reported previously, i.e., the bulk modulus and the mass density perpendicular to the cylinders, we also derive a simple expression for the effective mass density parallel to the cylinders. As expected, these two effective mass densities are not identical and constitute an anisotropic density tensor. Such intrinsic anisotropy can be engineered much stronger than the pure in-plane anisotropy induced by either anisotropic lattices or anisotropic scatterers.     

低温大试样热胀系数测试

本介绍了用熔融石英引伸法测量硬质材料热胀系数的简便装置,并给出了试样在液氦温区到室温的测量结果,数据的一致性以及与已有献数据比较取得了不错的结果．     

场效应器件低温特性与低噪声放大器

高温超导滤波器与低噪声放大器(LNA)组成的射频接收机前端设备具有高选择性、高灵敏度和极低的噪声,因而展现出广阔的应用前景.本文研究了场效应器件的低温物理特性和电学参数,研制了一种适用于高温超导微波接收系统的低温低噪声放大器,在60K工作温度下,具有很好的噪声特性.包括高电子迁移率场效应晶体管在内的元件参数均在60K温度下进行了实际测量.放大器的各项指标与设计值吻合,工作频段为800MHz～850MHz,增益大于18dB,输入输出驻波比小于1.2,噪声系数小于0.22dB.     

短波碲镉汞光伏器件的低频噪声研究

对所研制的短波光伏碲镉汞器件进行了变温电流-电压特性和低频噪声研究，测试温度范围255—293K.实验结果表明随着温度的下降，器件的优值因子R₀A从45×10³Ωcm²增加到7×10⁴Ωcm².器件在低频区的主要噪 声成分是1/f噪声和产生-复合噪声，在高频区主要是散粒噪声.在测试的偏压内，器件的1/f噪声功率谱密度与流过器件的电流的平方成正比，器件的Hooge系数为3×10^-4—7×10^-4.从噪声 功率谱密度曲线分析中得到产生-复合噪声的特征时间常数τ，通过τ的温度特性得到了器件的深能级. 关键词： 碲镉汞 优值因子 低频噪声 深能级     

Sound velocities of compressed Fe3C from simultaneous synchrotron X‐ray diffraction and nuclear resonant scattering measurements

The applications of nuclear resonant scattering in laser‐heated diamond anvil cells have provided an important probe for the magnetic and vibrational properties of ⁵⁷Fe‐bearing materials under high pressure and high temperature. Synchrotron X‐ray diffraction is one of the most powerful tools for studying phase stability and equation of state over a wide range of pressure and temperature conditions. Recently an experimental capability has been developed for simultaneous nuclear resonant scattering and X‐ray diffraction measurements using synchrotron radiation. Here the application of this method to determine the sound velocities of compressed Fe₃C is shown. The X‐ray diffraction measurements allow detection of microscale impurities, phase transitions and chemical reactions upon compression or heating. They also provide information on sample pressure, grain size distribution and unit cell volume. By combining the Debye velocity extracted from the nuclear resonant inelastic X‐ray scattering measurements and the structure, density and elasticity data from the X‐ray diffraction measurements simultaneously obtained, more accurate sound velocity data can be derived. Our results on few‐crystal and powder samples indicate strong anisotropy in the sound velocities of Fe₃C under ambient conditions.     

Hydrogen adsorption and desorption on the Pt and Pd subnano clusters – a review

In this review, we present our recent first principles studies on the sequential H₂ dissociative chemisorption and H desorption on the Pt_n and Pd_n clusters (n=2-9, 13). Upon full saturation by H atoms, the calculated H₂ dissociative chemisorption energy and H desorption energy on Pt₁₃ and Pd₁₃ clusters are similar to the corresponding values on smaller close-packed clusters. Indeed, the catalytic performances of these subnano clusters do not vary significantly with the particle sizes or shapes. Instead, they are dependent on the surface metal atoms which can be accessed by H atoms. In addition to the coverage dependency of the H₂dissociative chemisorption and H sequential desorption energies, the phase transition of both Pt₁₃ and Pd₁₃from the icosahedral to fcc-like structures at certain H coverage was also investigated.     

Improvement of modified analytic embedded atom method potentials for noble metals and Cu

The modified analytic embedded atom model (EAM) potentials considering farther neighbor atoms are improved for the noble metals (Ag, Au, Pt, Pd, Rh) and Cu. We not only adopt an end processing function and an enhanced smooth continuous condition for the pair potential, but also adjust the model parameters of multi-body potential by fitting a cohesive energy, a mono-vacancy formation energy, the Rose equation curve for the cohesive energy as a function of lattice parameter, a structure energy difference, elastic parameters and an equilibrium condition of crystal. The calculation results of structure energy differences misfit the experiment data for the noble metals and Cu in the unimproved EAM, because anyone of these differences have not been considered in the calculation of its model parameters. After the modification, the model showed better simulation results for the noble metals and Cu.     

无箔二极管强流电子束空间密度分布初步研究

通过在强磁场条件下,利用环形刀口石墨阴极(刀口尺寸38~39mm)开展电子束轰击收集极内表面铜箔和垂直轰击金属靶片实验,对无箔二极管中电子束的空间密度分布进行了初步研究,并对其产生原因进行了分析。研究结果表明,电子束径向分布在37.2~40.2mm,存在密度较高区域(38.8~39.4mm)和密度最大值点(39.2mm),且均偏向于阴极外侧。无箔二极管环形阴极爆炸发射产生电子束的径向密度分布可用偏态分布近似。     

测量熔融金属密度的浮子式光纤Bragg光栅传感器

密度可以解释熔融金属的性质和行为,密度的变化特征反映了熔融金属内部原子距离和配位数等的基本变化。研制了一种测量熔融金属密度的浮子式光纤Bragg光栅传感器,浸没在熔融金属中的浮子受浮力作用,通过传递杆、等臂杠杆及连杆,拉动等强度悬臂梁产生扰度变化,根据检测粘贴在等强度悬臂梁表面的光纤Bragg光栅中心波长移位值,测出浮力值,进而检测熔融金属密度。该传感器的理论灵敏度为0.115pm/(kg/m3),4次实验得到熔融金属的平均密度为7.574×103 kg/m3,略小于理论密度7.621×103kg/m3,相对误差为0.62,均方根误差为117.371kg/m3。