Local stability analysis of a low-dissipation cyclic refrigerator*

We study the local stability near the maximum figure of merit for the low-dissipation cyclic refrigerator,where the irreversible dissipation occurs not only in the thermal contacts but also the adiabatic strokes.We find that the bounds of the coefficient of performance at a maximum figure of merit or maximum cooling rate in the presence of internal dissipation are identical to those in the corresponding absence of internal dissipation.Using two different scenarios,we prove the existence of a single stable steady state for the refrigerator,and clarify the role of internal dissipation on the stability of the thermodynamic steady state,showing that the speed of system evolution to the steady state decreases due to internal dissipation.     

基于重复博弈的地方政府精准扶贫合作机制研究

精准扶贫是习近平总书记为彻底解决贫困问题而提出一项战略要求。精准扶贫是一项复杂性较高、涉及范畴较广的系统工作,其工作的展开需要由地方政府共同协作完成。地方政府合作周期长短对精准扶贫有着巨大的影响,基于博弈论的基本思想方法,针对地方政府精准扶贫合作机制进行研究。首先,针对精准扶贫过程中完全信息静态博弈的情况,构建地方政府合作与非合作的无限次重复博弈模型,并分析双方政府均采取冷酷战略时,彼此合作的临界贴现因子;然后,针对精准扶贫过程中地方政府合作周期长短对精准扶贫成效的问题,探讨了有限重复博弈模型的临界贴现因子与地方政府合作周期的关系。分析表明：在精准扶贫过程中,双方政府合作周期越长,临界贴现因子越小,精准扶贫合作的稳定性越强。最后,针对精准扶贫过程中地方政府合作周期和合作机制等提出对策和建议。     

大空间三向组合平板网架研究

利用中心节点、交叉梁、三角形拉杆和空心板所构成承力单元的组合以及内部支承柱的自由布置,本文提出了一种新型大空间三向组合平板网架结构。相关的TDGS分析系统针对原型试验取得了较好的模拟效果。通过引入柱的局部影响区域这一全新概念,系统总结了加入内部支承柱前后网架结构的内力和变形规律,进而为进一步的工程应用提供了可行性建议。     

Multi‐stimuli‐responsive self‐immolative polymer assemblies

Self‐immolative polymers (SIPs) undergo depolymerization in response to the cleavage of stimuli‐responsive end‐caps from their termini. Some classes of SIPs, including polycarbamates, have depolymerization rates that depend on environmental factors such as solvent and pH. In previous work, hydrophobic SIPs have been incorporated into amphiphilic block copolymers and used to prepare nanoassemblies. However, stimuli‐responsive hydrophilic blocks have not previously been incorporated. In this work, we synthesized amphiphilic copolymers composed of a hydrophobic polycarbamate SIP block and a hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) block connected by a UV light‐responsive linker end‐cap. It was hypothesized that after assembly of the block copolymers into nanoparticles, chain collapse of the PDMAEMA above its lower critical solution temperature (LCST) might change the environment of the SIP block, thereby altering its depolymerization rate. Self‐assembly of the block copolymers was performed, and the depolymerization of the resulting assemblies was studied by fluorescence spectroscopy, dynamic light scattering, and NMR spectroscopy. At 20 °C, the system exhibited a selective response to the UV light. At 65 °C, above the LCST of PDMAEMA, the systems underwent more rapid depolymerization, suggesting that the increase in rate arising from the higher temperature dominated over environmental effects arising from chain collapse. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1868–1877     

Healable dual organic–inorganic crosslinked sol–gel based polymers: Crosslinking density and tetrasulfide content effect

In this article, the first generation of healable sol–gel based polymers is reported. A dual organic–inorganic crosslinked network is developed containing non‐reversible crosslinks and reversible (tetrasulfide) groups. The designed polymer architecture allows thermally induced mesoscale flow leading to damage closure followed by interfacial strength restoration due to reformation of the reversible groups. While the reversible bonds are responsible for the flow and the interface restoration, the irreversible crosslinks control the required mechanical integrity during the healing process. The temperature dependent gap closure kinetics is strongly affected by the crosslinking density and tetrasulfide content. Raman spectroscopy is used to explain the gap closure kinetics in air and dry nitrogen. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1953–1961     

Aromatic amine‐terminated polysulfide oligomer: Synthesis and application in self‐healable polyurea

The dynamic chemistry of disulfide bonds has emerged as one of the most powerful tools used for the fabrication of organic compounds and self‐healing materials. In this article, a novel aromatic amine‐terminated polysulfide oligomer is first synthesized from thiol‐terminated polysulfide oligomer and bis(4‐aminophenyl) disulfide via disulfide metathesis mechanism. The resulting oligomer is confirmed by FTIR and ¹H NMR spectra and then successfully applied in constructing self‐healable polyurea material (A‐LP23‐I), which combines the advantages of higher strength of polyureas and excellent self‐healing ability of polysulfide‐based materials. After subjecting to a temperature of 75 °C for 48 h, both the tensile strength and ultimate elongation of A‐LP23‐I restore to more than 90% of the original values (3.32 MPa and 396%). This study demonstrates a novel strategy for synthesizing aromatic amine‐terminated oligomer. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1460–1466     

Control of thermoresponsivity of biocompatible poly(trimethylene carbonate) with direct introduction of oligo(ethylene glycol) under various circumstances

Poly(trimethylene carbonate) (PTMC) is a well‐known biodegradable polymer with good biocompatible properties which make it suitable for biomedical applications. Poly(5‐[2‐{2‐(2‐methoxyethoxy)ethyoxy}‐ethoxymethyl]‐5‐methyl‐1,3‐dioxa‐2‐one) (PTMC‐MOE3OM) and copolymers, bearing oligo ethylene glycol (OEG) at the side chain of PTMC backbone, were selected to investigate the cloud point behavior by solvents such as PBS, water, 10% ethanol solution and various ionic strengths. A pH‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐(5‐methyl‐5‐carboxylic‐1,3‐dioxane‐2‐one)) as carboxylic acid carbonate showed a decreased critical temperature at pH 2. Photo‐responsive copolymer, poly(TMCM‐MOE3OM‐co‐coumarin derivatives) bearing 1% and 10% of photo‐induced molecules (7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)]‐methoxy coumarin (TMCM‐coumarin)) exhibited a low cloud point because of the hydrophobic moieties. Meanwhile, alternative coumarin polymer including 2% of 4‐methyl‐7‐[(5‐(5‐methyl‐1,3‐dioxa‐2‐one)methoxy)butoxy)]‐methoxy coumarin (TMCM‐4‐methyl‐coumarin) has been successfully synthesized and copolymerized as a novel molecule. The various combinations of monomers were studied and the significant properties were determined via external triggers after copolymerization. This study showed basically synthetic progress toward designs and trivial rationalization of thermoresponsive copolymers close to body temperature. At present, various pendant groups as side part affect to the lower critical solution temperature (LCST) and biodegradable polymer in order to utilize the actual external stimuli application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3466–3474     

Dual‐responsive supramolecular self‐assembly of inclusion complex of an azobenzene‐ended poly(ε‐caprolactone) with a water‐soluble pillar[6]arene and its application in controlled drug release

Dual photo‐ and pH‐responsive polymeric vesicles are constructed from a host–guest complex between a water‐soluble pillar[6]arene and an azobenzene ended functionalized poly(ε‐caprolactone). Reversible morphological transitions between vesicles and solid aggregates are achieved upon repeated UV stimulus and pH stimulus. Moreover, the polymeric vesicles present excellent cytocompatibility toward HepG2 cells and can be further applied for controlled release of a hydrophilic model drug, DOX?HCl. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2477–2482