石墨烯掺杂LiFePO4电极材料的合成及其电化学性能

采用水热辅助法合成石墨烯改性的LiFePO4多孔微球电极材料.并对材料进行了X射线衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM),傅里叶变换红外(FT-IR)光谱,充放电等表征.从结果可以看出在2 mol·L-1LiNO3电解液体系中单纯包碳的LiFePO4微球在1C、50C倍率时的比容量分别为137、64 mAh·g-1,而石墨烯改性的LiFePO4微球的比容量分别为141、105 mAh·g-1,表现出较好的倍率特性.恒流循环充放电测试60次后两种材料容量保持率分别为70.2％、83.7％.说明掺杂石墨烯构成的三维导电网络能明显改善LiFePO4的电化学性能.     

氨基蒽醌衍生物的合成及其用作锂电池正极材料的电化学性能

合成了两种新型的有机正极材料——5-氨基-2,3-二氢-1,4-二羟基蒽醌(ADDAQ)和5-氨基-1,4-二羟基蒽醌(ADAQ),用核磁氢谱(1H-NMR)、质谱(MS)、元素分析(EA)、傅里叶红外(FTIR)光谱、紫外-可见(UV-Vis)光谱等方法对材料进行了表征,应用恒流充放电(GD/C)、循环伏安法(CV)、交流阻抗(EIS)等测试手段对材料的电化学性能进行了测试.实验结果表明:相比ADDAQ,ADAQ首次放电容量和循环性能都有显著提高.ADAQ的首次放电比容量为185mAh·g-1,50次循环之后容量为93mAh·g-1.并讨论了ADDAQ和ADAQ电化学性能差异的原因.     

Mg、Ti离子复合掺杂改性磷酸铁锂正极材料及其电池性能

在氮气气氛下采用高温固相方法, 合成了Mg、Ti 离子复合掺杂改性的锂离子电池正极材料(Li_0.98Mg_0.01)(Fe_0.98Ti_0.01)PO₄/C, 并通过粉末X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和充放电循环对材料进行性能表征. 测试结果表明, 复合离子掺杂可显著改善材料的电化学性能, 模拟电池在0.2C和1C倍率下的放电比容量分别为154.7 和146.9 mAh·g^-1. 以此复合掺杂样品为正极材料组装60 Ah动力电池, 其3C倍率放电容量仍保持为1C倍率放电容量的100%; 低温0 和-20 °C测试条件下, 动力电池放电容量分别保持为常温初始放电容量的89.7%和63.1%; 在常温1C/1C充放电条件下, 经过2000次循环后, 电池容量依然保持为初始放电容量的89%, 显示出优良的倍率放电性能和循环性能. 研究结果表明, Mg、Ti 离子复合掺杂改性的磷酸铁锂正极材料及其电池具有优良的放电性能和循环稳定性, 可广泛应用于电动(或混合动力)汽车和储能电池系统.     

微波场中里德堡锂原子的高激发跃迁

运用含时多态展开方法研究微波场中里德堡锂原子高激发态的性质,得到锂原子在微波场中的跃迁几率,实现对量子态的操纵与控制。结果表明：选择合适的振幅、频率等参数,可以实现布居数在量子态之间的完全跃迁。     

掺铁铌酸锂晶体中光致散射的锂组分和温度依赖关系研究

研究了单掺铁铌酸锂晶体的光致散射行为随锂组分以及温度的变化关系.实验表明,随晶体组分的升高,光致散射得到了大幅抑制;不同组分晶体光致散射被完全抑制的温度不同.由此提出掺铁铌酸锂晶体在48.9 mol%-49.3 mol%范围内可能存在一临界锂组分,当晶体组分超过这一临界组分时,晶体光致散射被大幅抑制,而光致散射行为的温度依赖关系明显改变.     

糠醇辅助的聚合凝胶法制备纳米Li4Ti5O12负极材料

以硝酸锂、钛酸正丁酯和糠醇为反应物,采用糠醇聚合凝胶法制备了纳米Li₄Ti₅O₁₂粉体．利用XRD、SEM和BET比表面测试对产物进行了表征,并研究了纳米Li₄Ti₅O₁₂粉体作为锂离子电池负极材料的电化学性能．在700℃或更高温度烧结时产物为纯相的尖晶石型．通过柠檬酸、聚乙烯吡咯烷酮、十六烷基三甲基溴化铵(CTAB)表面活性剂的加入能够减少产物颗粒的团聚程度,增大粉体的比表面积,提高其电化学性能．加入0.5 g CTAB、700℃烧结12 h的Li₄Ti₅O₁₂粉体展示出最高的比容量和最佳的循环性能,10 C下充电比容量高达156.7 mAh/g．     

Spinel lithium titanate (Li4Ti5O12) as novel anode material for room-temperature sodium-ion battery

This is the first time that a novel anode material, spinel Li₄Ti₅O₁₂ which is well known as a “zero-strain” anode material for lithium storage, has been introduced for sodium-ion battery. The Li₄Ti₅O₁₂ shows an average Na storage voltage of about 1.0 V and a reversible capacity of about 145 mAh/g, thereby making it a promising anode for sodium-ion battery. E_x-situ X-ray diffraction (XRD) is used to investigate the structure change in the Na insertion/deinsertion process. Based on this, a possible Na storage mechanism is proposed.     

Coupled-channel optical calculation for positron—lithium scattering

Positron scattering with atomic lithium is investigated by using a coupled-channel optical method.The ionization continuum and positronium formation channels are taken into account via a complex equivalent-local optical potential.The positronium formation cross sections and the ionization cross sections,as well as the total scattering cross sections,are reported at energies above 3 eV and compared with available experimental and theoretical data.     

基于铌酸锂压电弹光双效应的单晶体弹光调制器

为了克服Kemp型弹光调制器调制效率低、加工工艺困难及体积大等缺点,提出了采用铌酸锂(LiNbO3)晶体压电弹光双效应的单晶体弹光调制器的设计思想;根据压电振动理论和晶体光学原理,分析了晶体各物理量随空间变换的特性,推导了调制电压相位差振幅之间的关系,并对晶体切型和通光方向进行了优化,所设计的晶体尺寸为41 mm×7.7 mm×17.1 mm（x×y×z）,切割角为0°（x切）,通光方向z轴（光轴）,通过在x-z面施加与晶体谐振基频一致的周期性电压,产生沿x方向,频率为73.71 kHz的伸缩振动, 最后通过实验对所设计单晶体弹光调制器进行了验证;实验结果表明,对633 nm激光进行半波调制时,该弹光调制器所需调制电压为1.6 V;与基于钽酸锂(LiTaO3)且未进行切型优化的单晶体弹光调制器相比,调制电压下降了约4倍。     

Electrospun Hierarchical LiV3O8 Nanofibers Assembled from Nanosheets with Exposed {100} Facets and their Enhanced Performance in Aqueous Lithium‐Ion Batteries

Hierarchical LiV₃O₈ nanofibers, assembled from nanosheets that have exposed {100} facets, have been fabricated by using electrospinning combined with calcination. The formation mechanism of hierarchical nanofibers was investigated by X‐ray diffraction and scanning electron microscopy. Poly(vinyl alcohol) (PVA) played a dual role in the formation of the nanofibers: besides acting as the template for forming the fibers, it effectively prevented the aggregation of LiV₃O₈ nanoparticles, thereby allowing them to grow into small nanosheets with exposed {100} facets owing to the self‐limitation property of LiV₃O₈. This nanostructure is beneficial for the insertion/extraction of lithium ions. Meanwhile, the {100} facets have fewer and smaller channels, which may effectively alleviate proton co‐intercalation into the electrode materials. Hence, the hierarchical LiV₃O₈ nanofibers exhibit higher discharge capacities and better cycling stabilities as the anode electrode material for aqueous lithium‐ion batteries than those reported previously. We demonstrate that these hierarchical nanofibers have promising potential applications in aqueous lithium‐ion batteries.