锂离子电池正极材料LiMn2O4的合成与晶体结构（英）

Spinel LiMn₂O₄ powders were prepared using two-step synthesis method consisting of solid-state reaction method and citrate modified sol-gel method. The effects of the calcination temperature and the Li/Mn ratio of raw materials were studied on the physicochemical and electrochemical properties of the spinel LiMn₂O₄ powders, such as crystallinity, lattice constant and density. The title compound was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polycrystalline LiMn₂O₄ powers calcined at 750 ℃ were found to be composed of very uniformly-sized microcrystal with an average particle size of 300 nm. The improvement in electrochemical properties was mainly attributed to the process of re-grinding by absolute alcohol.     

Mechanism of the thermal decomposition of hydrophosphites of lithium,sodium and potassium

The thermal decomposition of some M ₂ ^I HPO₃ (M-Li, Na, K) phosphites under nitrogen atmosphere was investigated. A stepwise mechanism of thermal decomposition has been proposed.

---

Zusammenfassung Es wurde die thermische Zersetzung von Phosphiten M ₂ ^I HPO₃ (M-Li, Na, K) in Stickstoffatmosphere untersucht. Die Schritte des Mechanismus der thermischen Zersetzung wurden vorgeschlagen.

     

Synthesis of Phosphaformamidines and Phosphaformamidinates

A large‐scale synthetic route to a variety of phosphaformamidines and phosphaformamidinates, a type of derivative that was not accessible by the methods previously known for preparing phosphaamidines and phosphaamidinates, is reported. Thermally stable ethyl N‐arylformimidates 1 (ArN?CH(OEt), Ar=2,4,6‐(Me)₃Ph or 2,6‐(iPr)₂Ph) readily reacted with lithium dialkyl‐ and diarylphosphanides to afford the corresponding N‐aryl phosphaformamidines in 80 and 60 % yield, respectively, whereas with lithium (aryl)(silyl)phosphanide, the N‐aryl‐N‐silylphosphaformamidine (60 % yield) was obtained. Addition of primary lithium arylphosphanides to 1 followed by addition of a stoichiometric amount of nBuLi gave rise to the respective phosphaformamidinates (70–88 % yield). Methanolysis of the products afforded the N‐aryl‐N‐hydrogenophosphaformamidines (90–95 % yield). The solid‐state structure of one of the phosphaformamidinates is also presented.     

One‐Shot Double Elimination Process: A Practical and Concise Protocol for Diaryl Acetylenes

A variety of diaryl acetylenes were obtained in good yields when lithium hexamethyldisilazide was added to a solution of arylmethyl sulfone, aryl aldehyde, and chlorodiethylphosphate in THF. In this one‐shot process, a number of transformations such as aldol reaction, phosphorylation of aldolate, and double elimination of the resulting β‐substituted sulfone proceeded successively to afford the desired acetylenes. The one‐shot process was accelerated by the substitution of halogen atoms on the phenyl groups, and unsymmetrically substituted diaryl acetylenes were obtained without contamination of the dehalogenated products. Diaryl acetylenes with other substituents such as CF₃, ethoxycarbonyl, dimethylamino, TMS‐acetylene groups, as well as pyridinyl and thienyl moieties were also accessible with this method. However, methoxy‐substituted compounds were obtained in moderate yields under the same conditions, but the yields were increased when lithium diisopropylamide was used instead.     

Hygrometric Determination of Water Activities and Osmotic and Activity Coefficients of NH4Cl–LiCl–H2O at 25°C

The mixed aqueous electrolyte system of ammonium and lithium chlorides has been studied by the hygrometric method at 25°C. The relative humidities of this system are measured at total molalities from 0.3 to 6 mol-kg^{– 1} for different ionic-strength fractions y of NH₄Cl with y = 0.33, 0.50, and 0.67. The data obtained allow the deduction of new water activities and osmotic coefficients. The experimental results are compared with the predictions of the ECA (extended composed additivity) law proposed in our previous work. The Zdanovskii–Stokes–Robinson (ZSR), the Robinson–Stokes (RS), Reilly–Wood–Robinson (RWR), the Pitzer, and the Lietzke–Stoughton (LS II) models are also compared with our results. Predictions made using these models are, in general, consistent with our results. From these measurements, new Pitzer mixing ionic parameters are determined and used to predict the solute activity coefficients in the mixture for different ionic-strength fractions.     

Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.     

Tandem GC/MS: A useful tool for studying end-capping reactions of oligo(styryl)lithium anions

Anionic living polymerization methods, using organometallic initiators such as butyllithium reagents, have proven useful for, inter alia, styrene polymerization and are amenable to subsequent functionalization of poly(styryl)lithium in the termination step. In this study, general methods for the selective preparation of small styrene oligomers and termination of the intermediate oligo(styryl)lithium anions were investigated. The crude reaction mixtures were analyzed directly by tandem gas chromatography/mass spectrometry (GC/MS). Of the carbon- and silicon-based electrophiles tested, chloro(chloroalkyl)silanes, Cl-SiR₂(CH₂)_nCl in particular, were shown by GC/MS to be regioselective end-capping reagents, thus allowing subsequent transformation to the primary amine. The combined GC/MS data allow not only an estimate of the degree of functionalization, but also the identification of by-products, thus providing insight into the end-capping process that otherwise might be difficult to access. © 1995 John Wiley & Sons, Inc.     

Crystal Structures of Double Vanadates LiCoVO4 and Li0.5Co1.25VO4

The crystal structures of vanadates Li_1-2xCo_1+xVO₄ with x = 0 and 0.25 have been studied by a full pattern analysis. It has been shown that in cubic spinel LiCoVO₄ (space group Fd3m), the 8a tetrahedral sites contain a majority of vanadium and a small amount of lithium; all cobalt, lithium, and a small amount of vanadium occupy the 16d octahedral sites. Li_0.5Co_1.25VO₄ crystals belong to the rhombic system (Imma space group) with unit cell parameters a = 5.939(1), b = 5.810(1), and c = 8.303(1). On substitution of lithium by cobalt according to the scheme 2Li⁺ Co²⁺ + , half of the lithium and 70% of the vacancies formed are in the 4a octahedral sites, and onethird of lithium and most of cobalt occupy the 4d octahedral sites. The 4e tetrahedral sites are completely occupied by vanadium and lithium in a ratio of 0.92/0.08. The interatomic distances in LiCoVO₄ and Li_0.5Co_1.25VO₄ are calculated, and the sizes of lithium ion transport channels are evaluated.     

Surface structure and electrochemical characteristics of natural graphite fluorinated by ClF3

Natural graphite samples with average particle sizes of 5, 10 and 15 μm (NG5 μm, NG10 μm and NG15 μm, respectively) were fluorinated by ClF₃ (3 × 10⁴ Pa) at 200 and 300 °C for 2 min. X-ray photoelectron spectra of surface-fluorinated samples showed that surface fluorine concentration increased with increase in the particle size of graphite and reaction temperature. Small amounts of chlorine were also detected in all the fluorinated samples. Raman spectra of original and surface-fluorinated samples indicated that the surface disordering was increased for NG10 μm and NG15 μm. Surface areas were decreased by the fluorination for NG5 μm and NG10 μm but unchanged for NG15 μm. The mesopores with diameter of 1.5-2 nm increased while those of 2-3 nm decreased for all the samples. First coulombic efficiencies for NG10 μm and NG15 μm were highly increased by surface fluorination in 1 mol/dm³ LiClO₄-EC/DEC/PC (EC: ethylene carbonate, DEC: diethyl carbonate, PC: propylene carbonate) solution.     

Convenient procedure of Horner-Wadsworth-Emmons olefination for the synthesis of simple and functionalized α,β-unsaturated nitriles

A mild and practical procedure of Horner-Wadsworth-Emmons olefination promoted by lithium hydroxide and α-cyano phosphonates has been set up for the synthesis of α,β-unsaturated nitriles. The reaction conditions are tolerated by functionalized ketones and the exclusive formation of E-γ-hydroxy α,β-unsaturated nitriles has been observed.