高压下氢化锂晶体中的离子间力与结合能公式的原子分子设计

本文提出一种利用材料Hugoniot数据研究高压下离子晶体中微观离子状态及其离子间排斥作用势的新方法。对氢化锂晶体进行研究时,我们得到Li~+和H~-离子之间排斥作用势函数,结果表明文献〔1〕中提出的离子压缩效应具有客观性。     

Low-threshold, high-efficiency, high-repetition-rate optical parametric generator based on periodically poled LiNbO3

We report a high-repetition-rate optical parametric generator (OPG) with a periodically poled lithium niobate (PPLN) crystal pumped by an acousto-optically Q-switched CW-diode-end-pumped Nd:YVO_4 laser. For the maximum 1064nm pump power of 970mW, the maximum conversion efficiency is 32.9% under the conditions of 250℃, 1064nm pulse repetition rate of 22.6kHz and pulse width of 12ns, and the PPLN OPG threshold in the collinear case is less than 23.7μJ. The output power increases with the increase of the crystal temperature. The 1485－1553nm signal wave and 3383－3754nm idler wave are obtained by changing the temperature and the angle of the PPLN crystal.     

Inorganic Sol-Gel Preparation of Medium Sized Microparticles of Li2TiO3 from TiCl4 as Tritium Breeding Material for Fusion Reactors

Microspheres of Li₂TiO₃ were fabricated by a classical, inorganic sol-gel process from commercially available TiCl₄. Elaborated process consists of the following main steps: (1) dissolving of TiCl₄ in concentrated aqueous HCl and addition of LiOH; (2) formation of sol emulsion in 2-ethylhexanol-1 containing the surfactant SPAN-80 (EH); (3) gelation of emulsion drops by extraction of water with partially dehydrated EH; (4) impregnation of gel to Li:Ti molar ratio MR = 2; (5) thermal treatment at 1200°C in order to receive chloride free product. This temperature can be significantly lowered (to 750°C) by dechlorination starting solution TiCl₄ by chemical treatment of the with nitric acid to form of nitrate-stabilized titania sols. Tritium release from sol-gel made Li₂TiO₃ microspheres were found very close to that observed for other traditional materials, however for the first sample process starts slightly earlier.     

锂离子电池硅基负极材料的研究进展

硅基材料是新一代高容量锂离子蓄电池负极材料的典型代表,近年来已成为理论研究和应用研究的热点.本文介绍了锂离子电池硅基负极材料的制备方法、电化学性能及其研究现状,分析了硅材料作为锂离子电池负极材料存在的问题;讨论了硅材料作为锂离子电池负极材料的研究前景.并指出若能克服目前存在问题,将有望成为新一代锂离子电池负极材料.     

三硼酸锂晶体的生长形态

用自由生长系统研究了三硼酸锂ＬｉＢ_３Ｏ_５（ＬＢＯ）晶体的实际生长形态。实验表明，它的各晶面簇的重要性的顺序为：｛１１０｝＞｛０１１｝＞｛２０１｝＞｛１１１｝。讨论了ＬＢＯ晶体的生长习性与内部结构之间的关系并应用负离子配位多面体理论模型解释了ＬＢＯ晶体的生长形态。     

LiCoO2中锂离子固相扩散系数随循环次数的变化

The solid diffusion coefficient of lithium-ion in LiCoO₂ cathode material has been investigated by the capacity intermittent titration technique (CITT) at different voltages and at different charge/discharge cycles. By SEM, XRD and FTIR techniques, the structure of LiCoO₂ was studied before and after charge-discharge cycles, and the relationship between solid diffusion coefficient and crystal structure was further discussed. CITT results show that the value of Li⁺ solid diffusion coefficient of LiCoO₂ is about 10^-12 cm²·s^-1. During the whole charge-discharge cycles, the Li⁺ solid diffusion coefficient decreased within the voltage of 4.0～4.3 V, which is attributed to the change of the structure of LiCoO₂.     

Donor-acceptor properties, catalytic activity, and negative charge exoemission from the alumina surface modified with lithium cations

Donor-acceptor properties of alumina modified with lithium cations were studied by ESR of paramagnetic complexes of adsorbed anthraquinone. The results were compared with the data on negative ion emission (exoemission) accompanying the decomposition of isopropyl alcohol in the adsorption layer. The data on the activity measured by the pulse microcatalytic technique in isopropyl alcohol decomposition are discussed. Small additives of lithium were found to promote catalytic activity of the samples. The role of acid and basic sites in isopropyl alcohol decomposition was discussed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 616–621, April, 2006.     

熔融浸渍法制备锂离子电池正极材料LiMn2O4的研究

采用LiNO3和MnO2为原料,在650℃下制备了尖晶石型的LiMn2O4.通过X射线衍射、扫描电子显微镜、热重分析和电化学性能测试,发现该化合物具有很高的放电比容量和较好的循环性能,首次放电比容量可达到122 mA·h/g.并对循环性能衰减的各种因素进行了讨论.     

Improvement of basic performances of a nickel-metal hydride battery

To develop a sealed-type nickel-metal hydride battery for use in portable equipment or in electric vehicles, investigations were conducted on negative electrodes using AB₅-type hydrogen storage alloy and positive electrodes. For the cycle life performance of the battery, alkaline treatment of the alloy and the substitution of more than 50% to the alloy with Co were effective. For the positive electrode, zinc as a solid solution in the nickel positive electrode obviously prevented γ-NiOOH from being formed in the charging process of β-Ni(OH)₂ and suppressed the migration of the electrolyte solution in the separator to the active material of the positive electrode. Also, hydrophobic treatment of the surface of the alloy was effective to prevent the elevation of the battery internal pressure of the battery in high rate charge.