High Lithium Capacity MxV2O5Ay·nH2O for Rechargeable Batteries

The aqueous synthesis and electrochemical properties of nanocrystalline M_xV₂O₅A_y·nH₂O are described. It is easily and quickly prepared by precipitation from acidified vanadate solutions. M_xV₂O₅A_y·nH₂O has been characterized by X-ray powder diffraction, electron microscopy, TGA, chemical analyses, and electrochemical studies. The atomic structure is related to that of xerogel-derived V₂O₅·nH₂O. In M_xV₂O₅A_y·nH₂O, M is a cation from the starting vanadate salt and A is an anion from the mineral acid. This material exhibits high, reversible Li capacity and may be considered for use in a cathode in primary and secondary batteries. The lithium capacity of an electrode composed of M_xV₂O₅A_y·nH₂O/EPDM/carbon (88/4/8) is ∼380(mA h)/g (C/80 rate) and the energy density is ∼1000(W h)/kg (120-μm-thick cathode, 4-1.5 V, versus Li metal anode). Critical parameters identified in the synthesis of M_xV₂O₅A_y·nH₂O, with respect to achieving high Li-ion insertion capacity, are acid/vanadium ratio, starting vanadate salt, and temperature. Inclusion of carbon black in the synthesis yields a composite that maintains the high Li capacity, lowers the electrochemical-cell polarization, and preserves the lithium capacity at higher discharge rates. Li-ion coin cells, using pre-lithiated graphite anodes, exhibit electrochemical performance comparable to that of Li-metal coin cells.     

三(含氟烷基)磷酸酯的简便合成

以氯化锂催化四种含氟醇和三氯氧磷直接缩合分别得到了四种含氟三烷基磷酸酯,并以1H NMR,19F NMR,IR,MS和元素分析鉴定了含氟烷基磷酸酯产物的结构.     

Solvent-free low-dimensional polymer electrolytes for lithium-polymer batteries

The development of solvent-free low-dimensional polymer electrolytes intended for use in solvent-free lithium batteries operating at ambient or sub-ambient temperatures is described. The synthetic routes to the amphiphilic polymers I having 5-alkoxy-3,4-phenylene units connected with oligoethoxy segments via polyester-ether or pure polyether links (abbrev. CmOn, m = 12, 16, 18, n = 1-5) and to the copolymers CmO1-CmOn are described. The structures, thermal properties and SAXS long spacings of their complexes with lithium salts (type A) and with long chain n-alkane or alkyl side chain intercalation (type B) are discussed. However, high ambient conductivities (10(-4)-10(-3) S cm(-1)) are observed in type C systems when a second copolymer based on polytetramethylene oxide segments (II) is incorporated as a microphase between the lamellae of I and serving as an ion bridge or "glue". DC polarization between Li electrodes also gives ambient conductivities >/=ca.10(-3) S cm(-1). In type D systems the I/II interface is stabilized by including a copolymer III, promoting high reproducibility in performance. Copolymers I of CmO1-CmO5 having CmO1 in excess give optimum conductivities with low temperature-dependence. This, together with molecular modeling, suggests uncoupled ion mobilities by hopping between small aggregates in the interlamellar spaces.     

锂离子电池用多孔硅/石墨/碳复合负极材料的研究

在两步高能球磨和酸蚀条件下制得了多孔硅/石墨复合材料，并对其进行碳包覆制成多孔硅/石墨/碳复合材料。通过TEM，SEM等测试手段研究了多孔硅材料的结构。作为锂离子电池负极材料，电化学测试结果表明多孔硅/石墨/碳复合材料相比纳米硅/石墨/碳复合材料有更好的循环稳定性。同时，改变复合体配比、热解碳前驱物、粘结剂种类和用量也会对材料的电化学性能产生较大的影响。其中使用质量分数为10％的LA132粘结剂的电极200次循环以后充电容量保持在649.9 mAh·g^-1，几乎没有衰减。良好的电化学性能主要归因于主活性体-多孔硅颗粒中的纳米孔隙很好地抑制了嵌锂过程中自身的体积膨胀，而且亚微米石墨颗粒和碳的复合也减轻了电极材料的体积效应并改善了其导电性。     

Li＋在PC＋DMF混合溶剂中优先溶剂化的13C NMR研究

利用¹³C NMR光谱技术研究了Li^＋在碳酸丙烯酯(PC)＋N,N-二甲基甲酰胺(DMF)混合溶剂中的优先溶剂化现象. 根据溶剂分子中碳原子的化学位移随锂盐浓度的变化关系, 确定了与Li^＋发生配位的原子. 碳原子的配位位移值随混合溶剂组成的变化关系表明, 在LiClO₄＋PC＋DMF混合物中, DMF分子对Li^＋的溶剂化作用较PC分子强. 定量计算得到, 在n(PC)∶n(DMF)＝1∶1(摩尔比)的混合溶剂中, PC与DMF分子数在Li^＋第一溶剂化层中的比率为0.12, 说明Li^＋优先被DMF分子溶剂化.     

Multiple lithium exchange under lithium cationization of cyclodextrins

Multiple lithium exchange is observed during electrospray ionization of alpha-, beta- and gamma-cyclodextrins from aqueous methanolic solution containing LiOH. Apart from [M + Li](+) and [M + nLi - (n - 1)H](+) ions, abundant multiply lithiated doubly charged ions corresponding to [M + nLi - (n - 2)H](2+) ions were observed. At least six lithium exchanges in alpha-cyclodextrin, seven in beta-cyclodextrin and eight in gamma-cyclodextrin were noted. The propensity of multiply lithiated doubly charged ions is much less in the open-ended maltoheptaose. It appears that during droplet or cluster formation and subsequent desolvation, LiOH trapped in the cavity of cyclodextrin reacts to form multiply lithiated ions. The singly charged [M + Li](+) and doubly charged [M + 2Li](2+) ions fragment by glycosidic cleavages, giving B series of ions, whereas the multiply lithiated ions fragment by cross ring cleavages ((2, 4)A or (O, 2)X) followed by glycosidic cleavage. From the tandem mass spectra, it appears that a maximum of two lithium exchanges occur in one sugar unit in these cyclodextrins.     

Synthesis and characterization of LiCo<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4</Subscript> powder by a novel CAM microwave-assisted sol–gel method for Li ion battery

LiMn₂O₄-based spinels are of great interest as positive electrode materials for lithium ion batteries. LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) spinel phases have been synthesized by novel citric acid-modified microwave-assisted sol–gel method. The structural properties of the synthesized products have been investigated by X-ray powder diffraction and scanning electron microscopy. To improve the recharge capacity of Li/LiCo _x Mn_2−x O₄ cells, the electrochemical features of LiCo _x Mn_2−x O₄ compounds have been evaluated as positive electrode materials. The structural properties of Co-doped oxides are very similar to LiMn₂O₄ electrode. Techniques like cyclic voltammetry, charge–discharge and cycle life are also used to characterize the LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) electrodes.     

Apparent Molar Volume, Heat Capacity, and Conductance of Lithium Bis(trifluoromethylsulfone)imide in Glymes and Other Aprotic Solvents

Lithium bis(trifluoromethylsulfone)imide (LiTFSI) is a promising electrolyte for high-energy lithium batteries due to its high solubility in most solvents and electrochemical stability. To characterize this electrolyte in solution, its conductance and apparent molar volume and heat capacity were measured over a wide range of concentration in glymes, tetraethylsulfamide (TESA), acetonitrile, -butyrolactone, and propylene carbonate at 25°C and were compared with those of LiClO₄ in the same solvents. The glymes or n(ethylene glycol) dimethyl ethers (nEGDME), which have the chemical structure CH₃–O–(CH₂–CH₂–O) _n –CH₃ for n = 1 to 4, are particularly interesting since they are electrochemically stable, have a good redox window, and are analogs of the polyethylene oxides used in polymer-electrolyte batteries. TESA is a good plasticizer for polymer-electrolyte batteries. Whenever required, the following properties of the pure solvents were measured: compressibilities, expansibilities, temperature and pressure dependences of the dielectric constant, acceptor number, and donor number. These data were used in particular to calculate the limiting Debye-Hückel parameters for volumes and heat capacities. The infinite dilution properties of LiTFSI are quite similar to those of other lithium salts. At low concentrations, LiTFSI is strongly associated in the glymes and moderately associated in TESA. At intermediate concentrations, the thermodynamic data suggests that a stable solvate of LiTFSI in EGDME exists in the solution state. At high concentrations, the thermodynamic properties of the two lithium salts approach those of the molten salts. These salts have a reasonably high specific conductivity in most of the solvents. This suggests that the conductance of ions at high concentration in solvents of low dielectric constant is due to a charge transfer process rather than to the migration of free ions.     

Polygermoxanes suitable for biochemical purposes: II Linear trigermoxanes (high-viscosity oils)

Linear trigermoxanes, R¹ RGeOGe(R³)₂OGeRR¹, a new series of organogermanium compounds, were synthesized by reaction of a lithium organogermanolate with a suitable organogermanium dihalide. With alkyl or phenyl substituents, these trigermoxanes are structurally unstable viscous oils, due to redistribution reactions. When R³ substituents are bulky groups, such as mesityl, trigermoxanes are thermally and structurally stable oils; depending on the R¹ and R² substituents their viscosities lie in the range 240 to more than 1500 cPo (mPa s) at 20°C. When both terminal germanium atoms are substituted with two mesityl groups, trigermoxanes are stable glassy solids.     

Anharmonicity and fragility in lithium borate glasses

Since the physical properties of lithium borate glasses xLi₂O-(1-x)B₂O₃ (0<x< 0.28) vary over a wide range with the composition, this binary system is particularly suitable for studying the relationship between vibrational anharmonicity and fragility. The density, the linear expansion coefficient, the longitudinal and transverse ultrasonic velocities and their respective temperature coefficients of the velocities are measured, from which the vibrational anharmonicity in lithium borate glasses is evaluated with the help of the Grüneisen parameter at the Debye cut-off frequency and the Anderson-Grüneisen parameter: these two parameters plotted vs. composition have the same characteristics with minima at x≈0.08. The fragility is evaluated from the temperature width of the glass transition; the fragility also shows a minimum at x≈0.08. The presence of minima at x≈0.08 is ascribable to the fact that the crosslinking density between six-membered rings in the glass reaches a maximum at this composition. We show that the anharmonic parameters strongly correlate with the fragility metrics. This revised version was published online in August 2006 with corrections to the Cover Date.