Monte Carlo ray-tracing simulation for radiative heat transfer in turbulent fluctuating media under the optically thin fluctuation approximation

The Monte Carlo ray-tracing method (MCRT) based on the concept of radiation distribution factor is extended to solve radiative heat transfer problem in turbulent fluctuating media under the optically thin fluctuation approximation. A one-dimensional non-scattering turbulent fluctuating media is considered, in which the mean temperature and absorption coefficient distribution are assumed and the shape of probability density function is given. The distribution of the time-averaged volume radiation heat source is solved by MCRT and direct integration method. It is shown that the results of MCRT based on the concept of radiation distribution factor agree with these of integration solution very well, but results of MCRT based on the concept of radiative transfer coefficient do not agree with these of integration solution. The solution of time-averaged radiative transfer equation by the concept of radiative transfer coefficient should be treated with caution.     

Synthesis and characterization of isotopically enriched methylmercury (CH3201Hg+)

A simple procedure for the synthesis of an important standard, isotopically enriched methylmercury, which is not commercially available, has been established successfully. The isotopically enriched standard synthesized is utilized in conventional isotope dilution mass spectrometry (IDMS), as well as in speciated IDMS (SIDMS), for determination of the true concentration of methylmercury in environmental samples. The CH₃²⁰¹Hg⁺ standard has been synthesized from commercially available ²⁰¹HgO and tetramethyltin. The synthesis time required is 1 h at 60°C. The product is highly pure, yielding more than 90% as ²⁰¹Hg in CH₃²⁰¹Hg⁺. Hazardous dimethylmercury does not occur during this synthesis procedure. The product synthesized was analyzed using high‐performance liquid chromatography coupled with inductively coupled plasma mass spectrometry (ICP‐MS) and ICP‐MS alone in order to determine its concentration, isotopic composition and purity. The stability of the product was also evaluated for over 6 months and found to be stable at 4°C in the dark. The isotopically enriched methylmercury synthesized can be used in SIDMS and IDMS analyses as a standard. Copyright © 2003 John Wiley & Sons, Ltd.     

Nonlinear Energy Transfer over the Wave Spectrum in Water Covered by Solid Ice

On the basis of the hydrodynamic equations for nonlinear elastic-gravity waves beneath a solid ice cover and their Hamiltonian representation, a three-wave kinetic equation for the time evolution of the wave spectrum is formulated. The properties of the kernel of the kinetic integral describing the nonlinear interactions between wave triplets are investigated. An algorithm for numerically calculating the kinetic integral is developed. The rate of nonlinear energy transfer over the wave spectrum is estimated quantitatively and its most important characteristics are found.     

Characterization of Metallo Bis(terpyridine) Diblock Polymers by Nonaqueous Capillary Zone Electrophoresis

A method of nonaqueous capillary zone electrophoresis (CZE) has been developed to characterize block (co)polymers of poly(ethylene oxide) and poly(styrene) containing metallo bis(terpyridine) complexes as bridging units. Specific CZE separation conditions had to be applied, with barium perchlorate dissolved in N-methylformamide (NMF) as background electrolyte and OV-1701-OH deactivated capillaries. For detection UV absorption was measured at a wavelength of 316 nm. Metallo diblock polymers with molecular weights up to 30,000 Da could be analyzed by the proposed nonaqueous CZE method. Experiments performed with polymeric compounds containing Fe, Ni or Ru as central metal ions showed that their electrophoretic mobilities were independent of the type of metal ion. Therefore, the data on the size of the polymeric compounds could be obtained using just one set of calibration standards. Polydispersities of the samples calculated from the experimental results were in correlation with the polydispersities of the polymers used in the synthesis of the metallo diblock polymers. Several polymeric samples contained metallo mono(terpyridine) complexes as impurities. These by-products could be separated from the main product. With symmetrical diblock polymers only one by-product was detected, while with an asymmetric diblock polymer two types of mono-complexes were found. The amount of the mono-complexes present as impurities was dependent on the type of central metal ion (Ni > Fe >> Ru).     

The Investigation of Bulk and Surface Polariton Modes in Ga1?xNxAs by Using Infrared Magneto Spectroscopy

We present and discuss infrared magnetoplasma reflectivity and surface polariton modes in Ga_1–xN_xAs. It assumed that the sample is characterized by a magnetoplasma dielectric tensor. Surface polariton dispersion for two component magnetoplasma was calculated from reflectivity spectra data. We detect transverse optic phonon of GaN sublattice in 470 cm^-1. The origin of sharp feature in p-polarization reflectivity about 300 cm^–1 as well as LO phonon frequency of GaAs sublattice is due to Brewster mode. An interesting feature of surface modes in Voigt geometry is nonreciprocalicity, which means that the frequency changes when the direction of propagation is reversed. Also, the infrared magnetoplasma reflectivity of GaNAs should be providing determination of the electrons and heavy holes effective mass and carrier's concentration.     

回旋管输出窗热性质的研究

一、引 言 输出窗是回旋管的能量输出端口,它的特性直接影响到回旋管的性能和寿命。输出窗的设计包括电特性和热特性的研究。当输出功率增加时,热特性的研究变得非常重要以便寻求合理有效的冷却措施。 输出窗由波导和介质片(块)两部分组成。回旋管的输出波导是圆波导,介质一般做成     

He-N2 radiofrequency discharge: Influence of N2 on discharge and afterglow

A diagnostic study q (energy transfer processes in a He-N₂ flowing discharge and afterglow has been performed in a radiofrequency-produced plasma cooled in a liquid nitrogen hath. Optical emission spectroscopy in the visible and infrared spectral range as well as Langrnuir probe diagnostics were used. The vibrational kinetics of CO injected in such an afterglow has been examined. It shows a slow cooling of the electrons in the afterglow regime. The electron kinetics responsible joy CO vibrahonal excitation is turned off when N₂ is added to the He discharge, while that for vibrationally excited N₂ molecules is turned on. The results are discussed on the basis of previous theorerical calculations and experiments on the He-N₂ system.     

Energy transfer between the flavin chromophores of electron-transferring flavoprotein fromMegasphaera elsdenii as inferred from time-resolved red-edge and blue-edge fluorescence spectroscopy

Both a mode-locked argon-ion laser and synchrotron radiation were used as excitation sources to obtain time-resolved polarized fluorescence of the two FAD cofactors in electron transferring flavoprotein fromMegasphaera elsdenii. Red-edge excited and blue-edge detected fluorescence anisotropy decay curves did not contain a fast relaxation process which was observed upon mainband excitation and detection. This relaxation was assigned to homo-energy transfer between the two FAD cofactors. Failure of energy transfer as observed with edge spectroscopy on this protein excludes restricted reorientational motion of the flavins as a possible mechanism of depolarization. From the global analysis of the fluorescence anisotropy decay surface obtained at multiple excitation and detection wavelengths, the distance between and the relative orientation of the flavins could be estimated. The methodology described has general applicability in other multichromophoric biopolymers and has the potential to acquire accurate geometrical parameters in these systems.