Reflection of plane waves in generalized thermoelasticity of type III with nonlocal effect

The generalized thermoelasticity theory based upon the Green and Naghdi model III of thermoelasticity as well as the Eringen's nonlocal elasticity model is used to study the propagation of harmonic plane waves in a nonlocal thermoelastic medium. We found two sets of coupled longitudinal waves, which are dispersive in nature and experience attenuation. In addition to the coupled waves, there also exists one independent vertically shear-type wave, which is dispersive but experiences no attenuation. All these waves are found to be influenced by the elastic nonlocality parameter. Furthermore, the shear-type wave is found to face a critical frequency, while the coupled longitudinal waves may face critical frequencies conditionally. The problem of reflection of the thermoelastic waves at the stress-free insulated and isothermal boundary of a homogeneous, isotropic nonlocal thermoelastic half-space has also been investigated. The formulae for various reflection coefficients and their respective energy ratios are determined in various cases. For a particular material, the effects of the angular frequency and the elastic nonlocal parameter have been shown on phase speeds and the attenuation coefficients of the propagating waves. The effect of the elastic nonlocality on the reflection coefficients and the energy ratios has been observed and depicted graphically. Finally, analysis of the various results has been interpreted.     

White and some colored marbles as alternative radiation shielding materials for applications

ABSTRACT

In this paper, the radiation shielding parameters such as linear attenuation coefficients (LAC, µ), mass attenuation coefficients (MAC, µ/ρ), effective atomic numbers (Z_eff), effective electron densities (N_eff), half value of layers (HVL), mean free paths (MFP) and buildup factors (exposure (EBF) and energy absorption (EABF)) were investigated for cream (M1), pink (M2), white (M3), maroon (M4) and green (M5) marbles. Attenuation coefficients were measured in the energy region 31.18–661.66 keV photon energies. The values of Z_eff and N_eff were then calculated using these coefficients with logarithmic interpolation method, and HVLs and MFPs were calculated using the values of LAC of marble samples at the same photon energies. The experimental results were compared with the theoretical values obtained from WinXCom program, and good agreements were observed between the experimental and theoretical results. HVLs and MFPs of all marble samples were compared with those of some concretes, glasses and commercial radiation shielding glasses (SCHOTT Co.). The studied marbles were better radiation shielding materials than standard shielding concretes due to lower HVL and MFP values lower than the ordinary concrete. Finally, EBFs and EABFs of the marbles were calculated in the energy region 0.015–1?MeV up to penetration depths of 40 mfps by Geometric Progression method (G-P), and the results were discussed in terms of photon energies and chemical compositions of the marbles.     

Effect of variation in signal amplitude and transit time on reliability analysis of ultrasonic time of flight diffraction characterization of vertical and inclined cracks

The variation of amplitude and transit time of the diffracted signal from the crack-tip in complex geometry components and their resulting effect on the probability of detection (POD) and probability of sizing (POS) was studied. The diffracted signal amplitude has been evaluated from the standard expressions for diffraction coefficient, spatial attenuation and the transit time from the respective mathematical models for both vertical and inclined cracks. The same parameters namely the signal amplitude and the transit time have been measured through experiments conducted on simulated test specimens. It has been observed that the analytical and experimental results compare well with each other. Based on this result the trend and shape (width of the transition zone) of the POD/POS curves can be predicted.     

Cross‐linking and properties of rubber magnetic composites cured with different curing systems

Rubber magnetic composites were prepared by incorporation of strontium ferrite into rubber compounds based on acrylonitrile butadiene rubber and ethylene propylene diene monomer rubber. The sulfur, peroxide, and mixed sulfur/peroxide curing systems were introduced as cross‐linking agents for rubber matrices. The aim was to investigate the influence of curing system composition on curing process and cross‐link density of composite materials. Then, static and dynamic mechanical properties and thermal and magnetic characteristics were investigated in relation to the cross‐link density of rubber magnetic composites and structure of the formed cross‐links. The changes of dynamical and physicomechanical properties were in close correlation with the change of cross‐link density, whereas the tensile strength of magnetic composites showed increasing trend with increasing amount of peroxide in mixed curing systems. On the other hand, thermal conductivity and magnetic characteristics were found not to be dependent on the curing system composition.     

带有二元连接函数的半参数模型

提出了一种新的带有二元连接函数的广义半参数模型,即二元连接模型(简称为BLM).使用轮廓似然方法估计模型的参数和非参数部分,并给出了计算算法.证明了所得的未知参数的估计量为n~(1/2)-相合,渐近正态且具有渐近最小方差,给出了实际数据分析和模拟研究,最终采用局部功效方法来检验非参数部分的线性性.     

Extreme beam attenuation in double-slit experiments: Quantum and subquantum scenarios

Combining high and low probability densities in intensity hybrids  , we study some of their properties in double-slit setups. In particular, we connect to earlier results on beam attenuation techniques in neutron interferometry and study the effects of very small transmission factors, or very low counting rates, respectively, at one of the two slits. We use a “superclassical” modeling procedure which we have previously shown to produce predictions identical with those of standard quantum theory. Although in accordance with the latter, we show that there are previously unexpected new effects in intensity hybrids for transmission factors below a?10⁻⁴$a?10^{-4}$, which can eventually be observed with the aid of weak measurement techniques. We denote these as quantum sweeper effects, which are characterized by the bunching together of low counting rate particles within very narrow spatial domains. We give an explanation of this phenomenology by the circumstance that in reaching down to ever weaker channel intensities, the nonlinear nature of the probability density currents becomes ever more important, a fact which is generally not considered–although implicitly present–in standard quantum mechanics.     

Preparation of Molecule‐Responsive Microsized Hydrogels via Photopolymerization for Smart Microchannel Microvalves

Microdevices designed for practical environmental pollution monitoring need to detect specific pollutants such as dioxins. Bisphenol A (BPA) has been widely used as a monomer for the synthesis of polycarbonate and epoxy resins. However, the recent discovery of its high potential ability to disrupt human endocrine systems has made the development of smart systems and microdevices for its detection and removal necessary. Molecule‐responsive microsized hydrogels with β‐cycrodextrin (β‐CD) as ligands are prepared by photopolymerization using a fluorescence microscope. The molecule‐responsive micro‐hydrogels show ultra‐quick shrinkage in response to target BPA. Furthermore, the flow rate of a microchannel is autonomously regulated by the molecule‐responsive shrinking of their hydrogels as smart microvalves.

     

Effective wave propagation along a rough thin-elastic beam

Two methods for computing the complex-valued effective wavenumber of a rough beam in the context of linear time-harmonic theory are presented. The roughness of the beam is modelled as a continuous random process of known characteristic length and root-mean-square amplitude for either the beam mass or the beam rigidity. The first method is based on a random sampling method, with the effective wave field calculated as the mean of a large ensemble of wave fields for individual realisations of the roughness. The individual wave fields are calculated using a step approximation, which is validated for a deterministic problem via comparison to results produced by an integral equation approach. The second method assumes a splitting of the length scale of the fluctuations and an observation scale, employing a multiple-scale approximation to derive analytical expressions for the effective attenuation rate and phase change. Numerical comparisons show agreement of the results of the random sampling method and the multiple-scale approximation for a wide range of parameters. It is shown that the effective wavenumbers only differ by a real constant between the cases of varying beam mass and rigidity.     

Load’s temporal characteristics for annulling forced vibrations of linear elastic plates

We consider trapezoidal load-time pulses with linearly increasing and affinely decreasing durations equal to integer multiples of the time period of the first bending mode of vibration of a linearly elastic structure. For arbitrary spatial distributions of loads applied to monolithic and laminated orthotropic plates, it is shown through numerical solutions that plates’ vibrations become miniscule after the load is removed. This phenomenon is independent of the dwell time (i.e., the time duration between the rising and the falling portions) during which the load is kept constant. The primary reason for this response is that for such time-dependent loads, nearly all of plate’s strain energy is concentrated in deformations corresponding to the fundamental bending mode of vibration. Thus plate’s deformations can be studied by taking the mode shape of the 1st bending mode as the basis function and reducing the problem to that of solving a single second-order ordinary differential equation. We have verified this postulate by comparing strain energies computed from the 3-dimensional deformations of different plate geometries and boundary conditions with those determined by using the single degree of freedom (DoF) model. Thus for trapezoidal time-dependent loads applied on plates, the 1 DoF model provides reasonably accurate results and saves considerable computational effort.     

Numeral eddy current sensor modelling based on genetic neural network

This paper presents a method used to the numeral eddy current sensor modelling based on the genetic neural network to settle its nonlinear problem. The principle and algorithms of genetic neural network are introduced. In this method, the nonlinear model parameters of the numeral eddy current sensor are optimized by genetic neural network （GNN） according to measurement data. So the method remains both the global searching ability of genetic algorithm and the good local searching ability of neural network. The nonlinear model has the advantages of strong robustness, on-line modelling and high precision. The maximum nonlinearity error can be reduced to 0.037% by using GNN. However, the maximum nonlinearity error is 0.075% using the least square method.