On the error estimates for the rotational pressure-correction projection methods

In this paper we study the rotational form of the pressure-correction method that was proposed by Timmermans, Minev, and Van De Vosse. We show that the rotational form of the algorithm provides better accuracy in terms of the -norm of the velocity and of the -norm of the pressure than the standard form.

     

Elastic friction drive of surface acoustic wave motor

Importance of elastic deformation control to obtain large output force with a surface acoustic wave (SAW) motor is discussed in this paper. By adding pre-load to slider, stator and slider surfaces are deformed in a few tens nanometer. Appropriate deformation in normal direction against normal vibration displacement amplitude of SAW existed. By moderate deformation, the output force of the SAW motor was enlarged up to about 10 N and no-load speed was 0.7 m/s. To produce this performance, the transducer weight and slider size were only 4.2 g and 4 x 4 mm(2).By traveling wave propagation, surface particles of the SAW device move in elliptical motion. Due to the amplitude of the elliptical motion is 10 or 20 nm order, the contact condition of the slider is very critical. To control the contact condition, namely, the elastic deformation of the slider and stator surface in nanometer order, a lot of projections were fabricated on the slider surface. The projection diameter was 20 micro m. In static condition, the elastic deformation and stress were evaluated with the FEM analysis. From this calculation and the simulation result, it is consider that the wave crest is distorted, hence the elasticity has influence on the friction drive condition.Elastic deformation of the stator surface beneath the projection from the initial position were evaluated. In 4 x 4 mm(2) square area, the sliders had from 1089 to 23,409 projections. Depression was independent to the contact pressure. However, the output force depended on the depression although the projection density were different. From the view point of the output power of the motor, the proper depression was independent to the projection density. Around 25 nm depression, the output force and output power were maximized. This depression value was almost same as the vibration displacement amplitude of the stator transducer.     

Spatial Carrier Bi-frequency Fourier Transform Profilometry for the 3-D Shape Measurement of Object with Discontinuous Height Steps

1 IntroductionProjecting a single frequency lfringe pattern upon an Object and observing itsdeformation from a different view angle has been a common method for various threedimensional shape measurement techniques. An autpmatic analysis of the fringepatterns is normally carried out either by the FOurier transform method[IJ or by phasestepping['] of the fringe patterns. HOWever, these techniques have a disadvantage ofprincipal importance, the so-called indetedrinaCy tO a factor Of Zap, or …     

基于AVR单片机的万能材料试验机控制系统

采用AVR单片机AT90S8515作为控制核心,通过步进电机带动丝杠运动,利用光栅编码器、高精度力传感器、2个引伸计分别测量了位移、力及试件横、纵变形,在老式电子万能材料实验机上建立了新型计算机控制系统,可方便测定弹性模量和泊松比.     

航空胶片冲洗机直流电机调速控制系统设计

针对航空胶片冲洗机控制困难表现其电机负载不均匀，低速运行情况下电机震动剧烈．研制了专用的反馈控制系统．以双89C51单片机为核心组成控制电路，编写了系统操作程序和数字PID控制程序．对PID参量对控制系统稳定性的影响进行了分析，得出适应于本系统的PID控制规律，并经过大量的试验，获得了能使各档速度稳定运行下的PID控制参量．实践表明，该控制系统运行稳定可靠，低速控制准确度在3％以内，中高速准确度达到1％．     

250步混沌强度解析混沌特征及其在心率研究中的应用

应用250步混沌强度分析Lorenz系统，分别对3维和x分量进行了计算表明，250步混沌强度与Lorenz系统的参数有明显关系.计算了正常人的窦性心率的250步混沌强度，得到了它与年龄的关系：y=6.4623-0.0496x，相关系数为-0.669，这一结果支持了Goldberger的观点，如果人的250步混沌强度照此规律衰减，将在130岁降到0.     

Access to nonisocyanate poly(thio)urethanes: A comparative study

This article describes the synthesis of new cyclic compounds able to react with amines to get nonisocyanate polyurethanes (NIPUs). The contribution of the most studied five‐membered cyclic carbonate was compared to five‐membered cyclic dithiocarbonate analogous and to a six‐membered cyclic carbonate. Difunctional reactive species were obtained by a simple substitution reaction or an efficient thiol–ene coupling reaction. The products, obtained with high yields, were characterized by 1H NMR, 13C NMR, and Fourier tansform infrared spectroscopy analysis. The dicyclocarbonates were then used to synthesize NIPUs by step growth polymerization with several diamines. These materials exhibited glass transition temperatures from 19 to ?29 °C, molar mass from 1800 to 20,400 g mol^?1, and a 20% mass loss temperature (T_d = 20%) between 249 and 296 °C. Such materials are interesting candidates for coating applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3284–3296     

Synthesis of low grafting density molecular brush from a poly(N‐alkyl urea peptoid) backbone

The synthesis of a molecular brush was accomplished by combining step‐growth polymerization and reversible addition fragmentation chain transfer (RAFT) polymerization in a “grafting from” methodology. A symmetrical N‐alkyl urea peptoid sixmer containing alkyne functional groups was prepared using a divergent strategy, and the structure of the product was confirmed using NMR spectroscopy and mass spectrometry. A step‐growth process was used to prepare a linear poly(N‐alkyl urea peptoid) by reacting the diamine‐functionalized N‐alkyl urea peptoid sixmer with a diisocyanate. RAFT chain transfer agents were coupled to the poly(N‐alkyl urea peptoid) backbone through a copper‐catalyzed azide/alkyne cycloaddition reaction. The afforded macro‐RAFT agent was used to sequentially polymerize styrene and tert‐butyl acrylate block copolymer arms from the poly(N‐alkyl urea peptoid) backbone. The tert‐butyl groups were removed using dilute trifluoroacetic acid affording hydrophilic polyacrylic acid segments. The molecular brushes were observed to generate micelles in aqueous solution. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of main‐chain poly(carbazole)s via CuAAC

The synthesis and characterization of a novel family of main‐chain carbazole‐containing polymers using copper‐catalyzed azide‐alkyne cycloaddition chemistry is reported. The reactions were performed under mild conditions using readily available copper catalysts and ligands, which afforded polymeric products with M_ws up to 18 kDa. Using a range of techniques, the polymers were found to exhibit a glass transition temperature (T_g) of 85 °C, high thermal stability (T_d = 274 °C), and high photoluminescent quantum efficiency (?_f = 0.29; λ_em = 448 nm), which underscore their potential for use in organic light‐emitting diodes or other emissive devices, particularly where efficient blue emission is of value. The approach described offers practical advantages over other synthetic methods used to prepare main‐chain carbazole‐containing polymers, especially with regard to the lack of need for rigorously inert conditions and the absence of byproducts generated during the polymerization reaction. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A numerical investigation of the influence of the aspect ratio in three‐dimensional separated flows

The influence of aspect ratio in three‐dimensional, numerical experiments of separated flows is studied in the case of the backward‐facing step at Reynolds numbers 600, 800, and 950. The computational domain is designed as an actual laboratory experiment. The governing equations are the steady state, isothermal, and incompressible Navier–Stokes equations. The expansion ratio of the computational domain is 1:2. The aspect ratio varies from 1:10 to 1:40. The results of the computations focus on the spanwise variations of the length and the strength of the two eddies along the lower and upper wall. It is concluded that both numerical and laboratory experiments should be designed with an aspect ratio of at least 1:20, if only the accuracy of the position of the detachment and the re‐attachment points matters. If the accuracy of the shear‐stress distributions is also taken into account, then an aspect ratio of at least 1:30 should be chosen. Finally, if the magnitudes of the vortex centers are also considered, then only the aspect ratio of 1:40 qualifies for a realization of two‐dimensional flow conditions in the plane of symmetry. This is contrary to the common practice in the field, at least from the side of laboratory experiments, where an aspect ratio of 1:10 is still considered adequate for this purpose. Copyright © 2011 John Wiley & Sons, Ltd.