Propagation of the Hermite–Gaussian beams through misaligned optical system with a circular aperture

By means of expanding a hard-edged aperture into a finite sum of complex Gaussian functions, the approximate analytical formula of one kind of higher-order Gaussian beams called the Hermite–Gaussian beams (HGBs) passing through circular apertured and misaligned optical system is obtained in this paper. The result provides more convenience for studying its propagation than the usual way by using diffraction integral directly. Some numerical simulations are also given for illustrating the propagation properties of the HGBs through the circular apertured optical systems.     

一阶形式系统K~*及其完备性

模糊命题演算的形式系统L＊已经在模糊逻辑与模糊推理的结合研究中得到了成功的应用.本文考虑与系统L＊相应的一阶逻辑理论,建立了一阶形式系统K＊,并证明了这个系统的完备性.     

光纤的能量传输特性及应用

着重分析了影响光纤传输能量以及光纤传输中造成能量损耗的因素。这些因素主要包括光纤材料、构造、光纤的折射率分布、光纤的长度和芯径、光纤的数值孔径和热效应以及耦合等。同时 ,结合激光二极管点火的实例 ,分析探讨了其背景和应用价值。结论是 :为了尽可能减少能量损耗、提高光纤输出的激光功率和激光功率密度 ,应当选取合适的激光工作波长、较小的光纤长度、较小的芯径和较小的数值孔径 ,应采用渐变折射率分布光纤 ,应减少弯曲与耦合     

基于MATLAB(SIMULINK)的电弧炉电极调节系统FUZZY-PD控制器的仿真

介绍了采用MATLAB V5.2提供的模糊逻辑工具箱来设计研究电孤纺电极调节系统中的模糊－－PD控制器，讨论了在SIMULINK环境下模糊－PD控制器的参数自调速原理、结构、建立模糊控制规则库和模糊推论方法，并给出仿真结果与结论。     

不同入射角度下强流脉冲电子束能量沉积剖面和束流传输系数模拟计算

 强流脉冲电子束在材料中的能量沉积剖面、能量沉积系数和束流传输系数受其入射角的影响很大，理论计算了0.5~2.0MeV的电子束以不同的入射角在Al材料中的能量沉积剖面和能量沉积系数，并且还计算了0.4~1.4MeV电子束以不同入射角穿透不同厚度C靶的束流传输系数。计算结果表明，随着入射角的增大，靶材表面层单位质量中沉积的能量增大，电子在靶材料中穿透深度减小，能量沉积系数减小，相应的束流传输系数也减小；能量为0.5~2.0MeV的电子束当入射角在60°~70°时在材料表面层单位质量中沉积的能量较大。     

醇+N-甲基哌嗪二元体系的体积性质

采用振荡管式数字密度计分别测定甲醇、乙醇、正丙醇、异丙醇、丁正醇和异丁醇与N-甲基哌嗪组成的二元体系在298.15K下的密度，计算了超额摩尔体积、超额偏摩尔体积、表观摩尔体积、偏摩尔体积等体积性质，从分子相互作用角度讨论了这些二元体系的体积性质的变化规律，为N-甲基哌嗪的开发和研究提供基础数据和信息。     

Algorithms for flattened Gaussian beams passing through apertured and unapertured paraxial ABCD optical systems

The propagation property of flattened Gaussian beams (FGBs) is studied based on the Collins formula, and analytical propagation equations for FGBs with and without an aperture are derived. It is shown that the closed-form expressions for the FGB of order N passing through paraxial ABCD optical systems without an aperture can be written as the combinations of Confluent Hyper-geometric Functions, and that the analytical equations for the FGB of order N passing through apertured paraxial ABCD optical systems may involve Error Functions. The proposed algorithms for the considered beams can save computing time, provide intuitive physical insights, and help to design optical systems. Our results are confirmed and illustrated with numerical examples.     

改进型磁绝缘线振荡器的设计和数值模拟

 综合两种现有磁绝缘线振荡器的优点，对器件进行改进，将双渐变结构、轭流片和阻抗渐变三种增大功率的机制综合考虑，利用二维半全电磁PIC程序进行数值模拟，设计了一种新的改进型磁绝缘线振荡器，当外加电压为550kV，电流为35kA左右时，在L波段获得了6GW的峰值输出功率。     

用于波分复用系统的多峰干涉滤光片

介绍了用于波分复用系统的多峰干涉滤光片的设计原理,提出了滤光片透射峰位置的确定方法,讨论了影响滤光片半宽度和截止度的因素,给出了滤光片的膜厚容差分析结果,表明透射率监控标准偏差在<0.5%范围内,可以得到波形良好的多峰滤光片,最后给出了实验结果.     

ROBUST GLOBAL EXPONENTIAL STABILITY OF UNCERTAIN IMPULSIVE SYSTEMS

By using the quasi-Lyapunov function, some sufficient conditions of global exponential stability for impulsive systems are established, which is the basis for the following discussion. Then, by employing Riccati inequality and Hamilton-Jacobi inequality approach, some sufficient conditions of robust exponential stability for uncertain linear/nonlinear impulsive systems are derived, respectively. Finally, some examples are given to illustrate the applications of the theory.