3—Mercaptopropionic Acid Capped Gold Nanoclusters：Quantized Capacitance in Aquesous Media

3-Mercaptopropionic acid monolayer protected gold nanoclusters (MPA-MPCs) were synthesized and characterized by transmission electorn microscopy,UV-Vis spectroscopy,X-ray photoelectron spectroscopy and Fourler transform infrared spectroscopy.The exact value of quantized double-layer capacitance of MPCs in aqueous media was obtained by differential pulse voltammograms.     

A Clean Synthesis of 1,4‐Diarylquinoline Derivatives Catalyzed by TEBAC in Aqueous Media

A series of 1,4‐diarylquinoline derivatives were synthesized by the reaction of arylmethylidenemalononitriles or 2‐cyano‐3‐aryl‐1‐acrylate and 3‐arylamino‐5,5‐dimethylcyclohex‐2‐enone in aqueous media at 100 °C catalyzed by TEBAC. Meanwhile, the water medium was chosen as green solvent.     

Highly selective and efficient separations of a wide range of acidic species in capillary electrophoresis employing non-aqueous media

Summary The novel application of CE using non-aqueous media has been studied for the separation of a range of acidic compound types. This enabled the first quantitative assay by CE employing non-aqueous media to be performed. Separation selectivity manipulation for closely related species was achieved through variation of organic solvent types and composition, ionic strength changes, alteration of pH^* values and the addition of cyclodextrin additives soluble in organic solvents. This offers a greater range of possibilities during method development than use of aqueous buffer. The generation of low operating currents permitted rapid, highly efficient and selective separations to be achieved by applying high field strengths across short capillaries. Optimised rinsing and capillary regenerating procedures were devised which allowed highly repeatable separations to be achieved with migration time repeatability below 1% RSD. Use of internal standards also allowed 1% RSD values to be obtained for injection precision. Routine operating effects were assessed and it was observed that stacking effects remain important in non-aqueous CE. Also, optimal separations are obtained when the samples are diluted in the pure solvent used to prepare the electrolyte. The application range of non-aqueous CE was appreciably extended to include acidic drugs, dyes, surfactants and preservatives.     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Impact of biological factors on binding media identification in art objects: identification of animal glue in the presence of Aspergillus niger

The materials and especially organic materials used for creation of art objects can be utilized by various microorganisms for their growth and facilitate the microbial colonization of the object. An understanding of the chemical alterations in artefacts caused by the presence of microorganisms can be crucial for correct identification of the materials initially used for the artefact creation--nowadays an important step in restoration and/or art-historical investigation of the art object. The present article describes a model experiment in which we investigated the possible chemical alterations in animal glue films used as substrate for growth of the fungus Aspergillus niger. The sterilized animal glue solution was poured into Petri dishes, inoculated with Aspergillus niger, and subsequently incubated at 15 degrees C for 0, 7, 9, 14, and 28 days. After interruption of incubation, the content of the Petri dish was analyzed for amino acid composition by the GC-MS based method. It was found that the growth of Aspergillus niger on animal glue films did not cause significant changes in the amino acid composition of the film and had no impact on animal glue identification.     

Multiple scattering in random media I. Restricted two-body additive approximation

We present a microscopic theory of the problem of finding the properties of a particle interacting with potentials located at random sites. The sites are governed by a general probability distribution. The starting point is the multiple scattering equations for the amplitude k ₁|T |k ₂ in terms of the individual scattering amplitudes k ₁|T |k ₂. We work with quantitiesA defined by k ₁|T |k ₂=k ₁|T |k ₂exp[i(k ₁–k ₂)R ]. The theory is based on a splitting of the fundamental equation forA into equations for the mean A and the fluctuationsAA . Neglect of the fluctuations yields the quasicrystalline approximation. We rearrange the equation forAA to isolate the collective part of the fluctuations. We then make the simplest microscopic truncation which is thatAA is a restricted two-body additive function of the site positions. With the contribution of the collective fluctuations, this yields results forA that are accurate to ordert ⁴.Work supported in part by the National Science Foundation under Contract No. NSF DMRWork supported in part by the National Science Foundation under Contract No. NSF DMR     

A TAILORED FINITE POINT METHOD FOR THE HELMHOLTZ EQUATION WITH HIGH WAVE NUMBERS IN HETEROGENEOUS MEDIUM

In this paper, we propose a tailored-finite-point method for the numerical simulation of the Helmholtz equation with high wave numbers in heterogeneous medium. Our finite point method has been tailored to some particular properties of the problem, which allows us to obtain approximate solutions with the same behaviors as that of the exact solution very naturally. Especially, when the coefficients are piecewise constant, we can get the exact solution with only one point in each subdomain. Our finite-point method has uniformly convergent rate with respect to wave number k in L^2-norm.     

Study of the Imbibition Phenomenon in Porous Media by the Smoothed Particle Hydrodynamic (SPH) Method

Over recent decades, studies in porous media have focused on many fields, typically in the development of oil and gas reservoirs. The imbibition phenomenon, a common mechanism affecting multi-phase flows in porous media, has shown more significant impacts on unconventional reservoir development, where the effect of the pore space increases with decreased pore sizes. In this paper, a comprehensive SPH method is applied, considering the binary interactions among the particles to study the imbibition phenomenon in porous media. The model is validated with physically meaningful results showing the effects of surface tension, contact angle, and pore structures. A heterogeneous porous medium is also constructed to study the effect of heterogeneity on the imbibition phenomenon; it can be referred from the results that the smaller pore throats and wetting surfaces are more preferred for the imbibition. The results show that the SPH method can be applied to solve the imbibition problems, but the unstable problem is still a sore point for the SPH method.     

高斯型空间光孤子相互作用的数值研究

 通过数值模拟的方法,对高斯孤子在对数型饱和非线性介质中的相互作用进行了研究,考查了两光束间的相对振幅和相对相位对其相互作用的影响。结果表明：高斯孤子之间的相互作用敏感地依赖于两光束间的相对振幅和相对相位。在不同的振幅差异范围内,光束间的主要作用交替地表现为相互排斥和相互吸引,并由于高斯孤子的不稳定性,导致了光束在碰撞后以一种尺寸周期性变化的呼吸模式传输。随着相对相位的增大,两光束间始终持续地表现出强烈的排斥作用,直到相对相位增加到一个2π周期之后。而且碰撞之后,光束也都以呼吸模式进行传输,其分离的角度越大,呼吸就越明显。     

Stochastic and upscaled analytical modeling of fines migration in porous media induced by low-salinity water injection

Fines migration induced by injection of low-salinity water(LSW) into porous media can lead to severe pore plugging and consequent permeability reduction. The deepbed filtration(DBF) theory is used to model the aforementioned phenomenon, which allows us to predict the effluent concentration history and the distribution profile of entrapped particles. However, the previous models fail to consider the movement of the waterflood front. In this study, we derive a stochastic model for fines migration ...