丹麦生物质发电的现状和研究发展趋势

丹麦是世界上利用秸秆生物质燃烧发电技术开发、运行最好的国家，其经验值得中国借鉴。根据作者在丹麦对生物质燃烧发电的研究经历，系统地介绍了丹麦在秸秆生物质发电的经验、遇到的问题及相应的研究和今后的发展方向。     

Direct melting polycondensation and characterization of poly(ɛ-caprolactone-co-lactic acid)

A kind of biodegradable material, poly(ɛ-caprolactone-co-lactic acid) [P(CL-co-LA)] was synthesized via the direct melting polycondensation of lactic acid (LA) and ɛ-caprolactone (CL). The influences of the polycondensation time, and the catalyst type on the intrinsic viscosity of P(CL-co-LA) were also investigated. The results indicate that P(CL-co-dl-LA), with an intrinsic viscosity of 0.4733 dL/g, can be prepared by direct melting polycondensation with the molar ratio LA/CL = 3:7 at 180°C and 70 Pa for 12 h, using 0.5% (mass fraction) of SnCl₂ as the catalyst. Compared with lactide ring-opening polycondensation (ROP), the direct melting polycondensation of LA and CL is more practicable and simple. Translated from Journal of South China University of Technology, 2006, 34(7): 7–11 (in Chinese)     

Thermodynamic and Equilibrium Composition Analysis of Using Iron Oxide as an Oxygen Carrier in Nonflame Combustion Technology

1. Introduction The utilization of fossil fuels causes serious neg- ative impacts on the environment and human life. There are many pollutants such as SOx, NOx and CO2 emission produced from the combustion of coal, oil and natural gas. It has been known for more than 100 years that CO2 is a greenhouse gas and that the release of CO2 from fossil fuel combustion may affect the climate of the earth. In the last years the concern over the aspects of an increased release of greenhouse gases has…     

Thermodynamic and Equilibrium Composition of Using Iron Oxide as an Oxygen Carrier Nonflame Combustion Technology Analysis in

本文介绍了一种新的燃烧体系--熔融盐循环热载体无烟燃烧技术。这种燃烧体系杜绝环境污染气体NOx和CO2的排放，可以实现真正零排放的目标。计算了以Fe2O3作为氧载体的无烟燃烧体系的热力学参数。用最小吉布斯自由能原则，分析了Fe2O3与CH4的平衡组成。分析表明，如果要想在产物中产生高纯度的CH4完全氧化产物CO2和H2O，Fe2O3与CH4必须达到高摩尔比，如果Fe2O3的量不足，就会产生较多的部分氧化产物如CO，H2甚至C     

二组分混合物的最小流化特性 Ⅰ.混合/分离状态与最小流化空隙率

分析了二组分混合物的３种混合／分离状态及在完全混合时发生连续相转变的极限组成。提出一个判别非等密度体系混合／分离状态的法则与确定混合物空隙率简易可行的随意松散堆积方法。     

新型柴油节能降污添加剂的研制

为改善柴油燃料的燃烧性能,充分利用有限的石油资源,通过对两种单剂的制备、筛选,研制了一种新型柴油节能降污表面修饰纳米添加剂 添加剂以0.01‰质量分数加入柴油中,能显著提高柴油的燃烧效率、减少残炭.     

电沉积镍钨注钼电极的析氢反应

在所有电极过程中研究最多的是析氢反应,其重要性一直为化学界所关注。提高电极活性的各种方法中,普遍采用电沉积法,它价廉简便、效果明显。但涂层不够牢固,在使用过程中易脱落,使用寿命短。为了克服上述缺点,作者将电沉积和离子注入技术联合使用,即在Ni、W镀层上注入Mo离子,利用Mo离子的能量将Ni、W打入表面内层,进行离子束混合。这既     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

Recycling Chiral Organocatalyst （4S）-Phenoxy-（S）-proline for Direct Asymmetric Aldol Reaction in Ionic Liquid （bmim）PF6

Room temperature ionic liquid (bmim)PF6 was evaluated for recycling an organocatalyst (4S)-phenoxy-(S)-proline for direct asymmetric aldol reactions. The desired aldol products were obtained with good yields up to 93.2% and enantioselectivities up to 88.5%, and isolation of the products by simple extraction allowed recycling the ionic liquid containing the immobilized catalyst in subsequent reactions without significant decrease of yields and enantioselectivities.     

Thermodynamic Properties and Melting Behavior of Bi–Sn–Zn Alloys

Summary. The partial and integral enthalpies of mixing of liquid Bi–Sn–Zn alloys were determined at 500°C by a drop calorimetric technique using a Calvet-type microcalorimeter. The ternary interaction parameters in the Bi–Sn–Zn system were fitted using the Redlich-Kister-Muggianu model for substitutional solutions, and isoenthalpy curves of the integral molar enthalpy of mixing at 500°C were constructed. Furthermore, a DSC technique was used to determine the liquidus temperatures in three sections (3, 5, and 7 at.% Zn) as well as the invariant reaction temperature of the ternary eutectic L ⇄ (Bi) + (Sn) + (Zn). The ternary eutectic reaction was found at 135°C.