Influences of Sr2+ Doping on Microstructure,Giant Dielectric Behavior,and Non-Ohmic Properties of CaCu3Ti4O12/CaTiO3 Ceramic Composites

The microstructure, dielectric response, and nonlinear current-voltage properties of Sr²⁺-doped CaCu₃Ti₄O₁₂/CaTiO₃ (CCTO/CTO) ceramic composites, which were prepared by a solid-state reaction method using a single step from the starting nominal composition of CCTO/CTO/xSrO, were investigated. The CCTO and CTO phases were detected in the X-ray diffraction patterns. The lattice parameter increased with increasing Sr²⁺ doping concentration. The phase compositions of CCTO and CTO were confirmed by energy-dispersive X-ray spectroscopy with elemental mapping in the sintered ceramics. It can be confirmed that most of the Sr²⁺ ions substituted into the CTO phase, while some minor portion substituted into the CCTO phase. Furthermore, small segregation of Cu-rich was observed along the grain boundaries. The dielectric permittivity of the CCTO/CTO composite slightly decreased by doping with Sr²⁺, while the loss tangent was greatly reduced. Furthermore, the dielectric properties in a high-temperature range of the Sr²⁺-doped CCTO/CTO ceramic composites can be improved. Interestingly, the nonlinear electrical properties of the Sr²⁺-doped CCTO/CTO ceramic composites were significantly enhanced. The improved dielectric and nonlinear electrical properties of the Sr²⁺-doped CCTO/CTO ceramic composites were explained by the enhancement of the electrical properties of the internal interfaces.     

硅单粒子位移损伤多尺度模拟研究

本文结合分子动力学方法和动力学蒙特卡罗方法, 研究了单个粒子入射硅引起的位移损伤缺陷的产生和演化过程; 基于Shockley-Read-Hall理论计算了单个粒子入射引起的位移损伤缺陷导致的泄漏电流增加及其演化过程, 比较了缺陷退火因子与泄漏电流退火因子之间的差异, 并将计算结果与实验值进行了对比. 结果表明, 计算泄漏电流时, 仅考虑一种缺陷的情况下缺陷退火因子与泄漏电流退火因子相同, 考虑两种缺陷类型情况下二者在数值上有所区别, 但缺陷退火因子仍能在一定程度上反映泄漏电流的退火行为. 分子动力学模拟中采用Stillinger-Weber势函数和Tersoff势函数时缺陷退火因子和泄漏电流退火因子与实验结果一致, 基于Stillinger-Weber势函数的计算结果与实验值更为接近.     

Miscibility in poly(L-lactide)- b -poly( $ \upvarepsilon$ -caprolactone) double crystalline diblock copolymers

Thermally stimulated depolarization currents, TSDC, wide-angle X-ray scattering, WAXS, differential scanning calorimetry, DSC, and polarized light optical microscopy, PLOM, have been used to examine poly(L-lactide)-b -poly( -caprolactone) diblock copolymers in a wide composition range. Both components are crystallizable and the miscibility in the amorphous phase has been determined from the behavior of the primary relaxations which are the dielectric manifestation of the glass transition, and also from the superstructural morphology revealed by PLOM and the compositional dependence of the melting points as determined by DSC. Distinct segmental mobilities in the amorphous phase which can be well resolved by TSDC are present; the mode of the slower component shifts to lower temperatures as the PCL content increases while the glass transition of neat PCL is present for all compositions. A relaxation times bimodal distribution is apparent for PCL-rich copolymers. The composition dependence of the multiple glass transitions detected in these weakly segregated copolymers are predicted by the self-concentration model for a miscible blend made of components with a large T_g contrast.     

Composition of oxygen precipitates in Czochralski silicon wafers investigated by STEM with EDX/EELS and FTIR spectroscopy

In this work, we investigated the stoichiometry of oxygen precipitates in Czochralski silicon wafers. The thickness dependence of the Cliff–Lorimer sensitivity factor for the silicon/oxygen system was determined and applied for the investigation of the stoichiometry of oxygen precipitates by EDX. The results show that both plate‐like oxygen precipitates and a transitional form between plate‐like and octahedral precipi‐ tates consist of SiO₂. This was confirmed by EELS low loss spectra where the typical spectrum for amorphous SiO₂ was observed. Moreover, the absorption band of plate‐like precipitates at 1227 cm^–1 was found in the low temperature FTIR spectrum. It was demonstrated that this band can only be simulated by the dielectric constants of amorphous SiO₂. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

手性负折射率材料的最新进展

阐述了手性负折射率现象的产生机制;总结了近几年国内外手性负折射率材料在仿真模拟和实验制备方面的研究进展;分析了手性负折射率材料的旋光性、手性参数、损耗等;介绍了手性负折射率材料在各个领域的应用。分析认为,探索手性负折射率材料的新机制、新方法和新材料,从而在可见光波段实现负折射率是未来手性负折射率材料的重要发展方向之一。     

操控非线性损耗实现稳定的高功率单频激光及可调谐激光的输出

通过操控线性和非线性损耗,使激光器满足单频运转的物理条件,获得了稳定高功率单频激光输出.利用非线性损耗取代了现有的标准具锁定技术,实现无调制锁定的宽带连续可调谐激光输出.     

Swift heavy ion induced capacitance and dielectric properties of Ni/n-GaAs Schottky diode

The in-situ capacitance and dielectric properties of 25 MeV C⁴⁺ ion irradiated Ni/n-GaAs Schottky barrier diode (SBD) were studied at 100 kHz in the fluence range 5 × 10¹⁰ – 5 × 10¹³ ions/cm². The investigation shows reduction in capacitance and charge density with increase in ion fluence. Consequent changes were observed in other related parameters like conductance, dielectric constant, dielectric loss, loss tangent and electrical modulus. The results were interpreted in terms of generation of swift heavy ion induced acceptor trap states by electronic energy loss mechanism. Besides, the switch over characteristics of depletion to inversion regions in the CV plot reveals minority carrier recombination centers also. The dispersion and relaxation peaks observed in bias dependent dielectric plots were ascribed to the polarization and relaxation mechanism due to the interfacial trap states. The traps and recombination centers were found to alter the barrier characteristics of the fabricated SBD depending upon the ion fluence.     

环氧灌浆材料在莞惠城际轨道工程GZH-5标渗漏水治理中的应用

针对当前聚氨酯灌浆材料在渗漏水治理中存在的问题,提出了依靠堵水环氧灌浆材料和高渗透环氧灌浆材料进行渗漏水治理的新思路。环氧类灌浆材料既能够对混凝土裂缝等缺陷进行修复,也能够封堵渗漏水,希望修复后的缺陷能够保持和恢复混凝土结构的耐久性。     

Effects of acid etching on the structure of PtNi catalyst and total exposed active sites

The integration technology of hydrogen preparation–hydrogen storage not only can utilize hydrogen energy efficiently but also can improve the selectivity of the electrode maximally. In the present work, the structure and composition of the PtNi catalyst was characterized by X-ray diffraction (XRD); and its electrochemical properties, morphology, and surface binding energy were analyzed by cyclic voltammetry (CV) and linear scanning voltammetry (LSV), scanning electron microscopy equipped with energy-dispersive spectrometry (SEM-EDS), and X-ray photoelectron spectroscopy (XPS), respectively. The effects of different acid etching treatments (e.g., etching time, etchant concentration, and etching temperature) on the structure and surface active sites were investigated by the orthogonal experiment. The experimental results reveal that after etching with 0.5 mol/L of perchloric acid for 0.5 h at 60°C, the electrode weight loss of the PtNi catalyst is mainly attributed to the large loss of Ni atoms in film layer. This results in the reduced alloy phase in film layer and the appearance of Pt characteristic diffraction peak. The relative content of Pt on the surface of the film electrode increases significantly, and the total number of active sites also increases correspondingly. The binding energy of Pt4f_7/2 decreases by 0.19 eV, and the number of active sites involved in hydrogen release decreases, indicative of the reduced promotion effect of the PtNi catalyst on hydrogen release.     

扩散式气固分离器内两相流动数值模拟

采用RNG k-ε模型、随机颗粒轨道模型对扩散式气固分离器内的两相流动情况进行了数值模拟研究,讨论了流速对分离效率的影响,颗粒分级分离效率,颗粒轨迹,以及多个几何结构尺寸对分离效率和阻力系数的作用情况.数值模拟结果表明该类分离器流场总体成双层流动结构,分离器对4 μm以下的小颗粒分离效率较低,流速对分离效率的作用比较明显,各结构尺寸对阻力系数和分离效率的影响比较复杂,结构尺寸的取值有一定比例范围.