甲氨蝶呤/层状双金属氢氧化物的性能调控及细胞生物实验研究

在乙醇-水混合体系中,以氨水为沉淀剂共沉淀合成了甲氨蝶呤/层状双金属氢氧化物(MTX/LDH)纳米复合物,采用控制水热处理时间的方式来调控其性能。利用X-射线衍射(XRD)、透射电镜(TEM)和红外光谱(FT-IR)等表征手段,对其结构及形貌进行了表征。研究表明:MTX分子以单层倾斜或垂直方式插入LDH层间,随着水热处理时间的不同,MTX在层间的倾斜角度发生了变化;水热处理时间对产物的结晶度、粒径和层间排列方式都有影响,当水热处理时间为12h时,得到的MTX/LDH纳米复合物的结晶度最高,单分散性最好。在磷酸缓冲液中考察了MTX/LDH纳米复合物的缓释性能,结果表明样品均呈现出良好的缓释性能,释放速率先快后慢。重点考察了这几种MTX/LDH纳米复合物作用于肺癌细胞A549的细胞生物实验,研究表明这几种复合物对肺癌细胞A549都具有良好的抑制作用,其效果与纳米复合物的单分散性和粒径有密切的关系,单分散性越好,粒径分布越均匀,对A549癌细胞的抑制效果越好。     

A Pressure-Induced Inverse Order–Disorder Transition in Double Perovskites

Given the consensus that pressure improves cation ordering in most of known materials, a discovery of pressure-induced disordering could require recognition of an order–disorder transition in solid-state physics/chemistry and geophysics. Double perovskites Y₂CoIrO₆ and Y₂CoRuO₆ polymorphs synthesized at 0, 6, and 15 GPa show B-site ordering, partial ordering, and disordering, respectively, accompanied by lattice compression and crystal structure alteration from monoclinic to orthorhombic symmetry. Correspondingly, the long-range ferrimagnetic ordering in the B-site ordered samples are gradually overwhelmed by B-site disorder. Theoretical calculations suggest that unusual unit-cell compressions under external pressures unexpectedly stabilize the disordered phases of Y₂CoIrO₆ and Y₂CoRuO₆.     

Pressure-Suppressed Carrier Trapping Leads to Enhanced Emission in Two-Dimensional Perovskite (HA)2(GA)Pb2I7

A remarkable PL enhancement by 12 fold is achieved using pressure to modulate the structure of a recently developed 2D perovskite (HA)₂(GA)Pb₂I₇ (HA=n-hexylammonium, GA=guanidinium). This structure features a previously unattainable, extremely large cage. In situ structural, spectroscopic, and theoretical analyses reveal that lattice compression under a mild pressure within 1.6 GPa considerably suppresses the carrier trapping, leading to significantly enhanced emission. Further pressurization induces a non-luminescent amorphous yellow phase, which is retained and exhibits a continuously increasing band gap during decompression. When the pressure is released to 1.5 GPa, emission can be triggered by above-band gap laser irradiation, accompanied by a color change from yellow to orange. The obtained orange phase could be retained at ambient conditions and exhibits two-fold higher PL emission compared with the pristine (HA)₂(GA)Pb₂I₇.     

Interfacial Strain Release from the WS2/CsPbBr3 van der Waals Heterostructure for 1.7 V Voltage All-Inorganic Perovskite Solar Cells

Perovskite lattice distortion induced by residual tensile strain from the thermal expansion mismatch between the electron-transporting layer (ETL) and perovskite film causes a sluggish charge extraction and transfer dynamics in all-inorganic CsPbBr₃ perovskite solar cells (PSCs) because of their higher crystallization temperatures and thermal expansion coefficients. Herein, the interfacial strain is released by fabricating a WS₂/CsPbBr₃ van der Waals heterostructure owing to their matched crystal lattice structure and the atomically smooth dangling bond-free surface to act as a lubricant between ETL and CsPbBr₃ perovskite. Arising from the strain-released interface and condensed perovskite lattice, the best device achieves an efficiency of 10.65 % with an ultrahigh open-circuit voltage of 1.70 V and significantly improved stability under persistent light irradiation and humidity (80 %) attack over 120 days.     

Origin of pressure-induced insulator-to-metal transition in the van der Waals compound FePS3 from first-principles calculations

Pressure-induced insulator-to-metal transition (IMT) has been studied in the van der Waals compound iron thiophosphate (FePS₃) using first-principles calculations within the periodic linear combination of atomic orbitals method with hybrid Hartree–Fock-DFT B3LYP functional. Our calculations reproduce correctly the IMT at ∼15 GPa, which is accompanied by a reduction of the unit cell volume and of the vdW gap. We found from the detailed analysis of the projected density of states that the 3p states of phosphorus atoms contribute significantly at the bottom of the conduction band. As a result, the collapse of the band gap occurs due to changes in the electronic structure of FePS₃ induced by relative displacements of phosphorus or sulfur atoms along the c-axis direction under pressure.     

二维纳米片层孔洞化策略及组装材料在超级电容器中的应用

功率密度高、倍率性能优异和循环性能好等特性使得超级电容器在储能领域显示了巨大的应用前景。尽管二维层状材料剥离形成的纳米片层不仅可为电化学反应提供独特的纳米级反应空间,而且由其组装的层状纳米电极材料具有化学和结构上的氧化还原可逆性及纳米片层水平方向上离子或电子快速传输通道。但是,纳米片层组装电极材料在纳米片层垂直方向上离子或电子传输存在障碍,对于超级电容器功率密度和能量密度的提高及实现快速能量储存非常不利。因此,如何通过改善离子或电子的快速传输,实现超级电容器大功率密度下的高能量密度是超级电容器电极材料发展的方向之一。本文主要综述了二维层状材料剥离成纳米片层,纳米片层孔洞化策略及组装孔洞化材料在超级电容器电极材料中的应用。纳米层孔洞化技术是改善层状电极材料在纳米片层垂直方向离子或电子传输的有效手段,为实现高比电容下的高倍率性能超级电容器电极材料制备提供了方法学。最后,对开发大功率密度下的高能量密度超级电容器电极材料提出了展望。     

氮掺杂HTi2NbO7纳米片的制备及其可见光催化性能

首先,采用高温固相法制备层状前驱体CsTi_2NbO_7,再通过与硝酸进行质子交换形成层状HTi_2NbO_7;其次,在四丁基氢氧化铵(TBAOH)中剥离层状HTi_2NbO_7以获得HTi_2NbO_7纳米片;然后与尿素混合并高温焙烧;最后成功地得到了氮掺杂的HTi_2NbO_7纳米片光催化剂。使用粉末X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、X射线光电子能谱(XPS)、紫外-可见漫反射吸收光谱(UV-Vis DRS)以及N_2吸附-脱附测试等方式对所制备样品的晶体结构、形貌、比表面积、孔分布和光吸收能力等进行详细的表征。研究表明,氮掺杂后减小了HTi_2NbO_7的禁带宽度,从而使光响应范围扩展到可见光区域;掺杂的氮原子主要位于Ti_2NbO_7-薄片的间隙位置,并与氢离子化学键合;与N掺杂的层状HTi_2NbO_7相比,N掺杂的HTi_2NbO_7纳米片具有更大的比表面积和更丰富的介孔结构,这是由于钛铌酸纳米片相对松散且不规则的排列。因此,在降解罗丹明B(RhB)溶液时,N掺杂的HTi_2NbO_7纳米片比N掺杂的层状HTi_2NbO_7具有更加优异的可见光催化活性。     

Recent advances of lead-free metal halide perovskite single crystals and nanocrystals: synthesis,crystal structure,optical properties,and their diverse applications

Lead halide hybrid perovskites have received massive research attention because of their unique inherent photophysical properties that driven them for potential application in the fields of photovoltaics, light-emitting devices, lasing, X-ray detector, and so on. Perovskite single crystals and nanocrystals are generally synthesized via various low-cost solution-processed techniques. The emergence of simple growth approaches of perovskite structures enable to fabricate low-cost and highly efficient devices. However, toxicity of Pb atoms and instability of perovskite structures obstruct further commercialization of these technologies. Recent efforts have been shifted to discover novel, eco-friendly, and stable lead-free metal halide perovskite (LFHP) materials and exploring their different growth processes for various device applications. This review aims to provide an up-to-date analysis of recent progress report on LFHPs and will mainly focus on their growth processes in the single crystalline and nanocrystalline forms. This review also tries to understand how the perovskite crystal structure impacts on their fundamental properties. In addition, we discuss the current progress in various field of applications and their future aspects.     

A Factorial Design Approach for Hydrothermal Synthesis of Phase‐Pure AgInO2: A Parametric Optimization Study

Owing to a wide range of industrial applications and fundamental importance, delafossite compounds have gathered tremendous interest in research community. In this study, the formation of hexagonal nanoplates of AgInO₂ mainly dominated by (00l) facets with no metallic Ag impurity, reported using a facile hydrothermal route at 180 °C using KOH as mineralizer by adopting a factorial design approach. Rietveld analysis of the powder XRD pattern and SAED confirms the rhombohedral system of AgInO₂. FE‐SEM image shows a uniform hexagonal plate‐like morphology with an average width of about 300 nm and thickness of 70 nm. XPS and EDX analysis confirm potassium ion free AgInO₂. A specific surface area of about 48.5 m² g^?1 is arrived from N₂ adsorption studies. Temperature‐dependent AC impedance measurements revealed an activation energy of 0.24 eV/f.u. Further, TG‐DTA studies found that the compound is stable in air up to 595 °C.     

Steric Mixed‐Cation 2D Perovskite as a Methylammonium Locker to Stabilize MAPbI3

The reduced dimension perovskite including 2D perovskites are one of the most promising strategies to stabilize lead halide perovskite. A mixed‐cation 2D perovskite based on a steric phenyltrimethylammonium (PTA) cation is presented. The PTA‐MA mixed‐cation 2D perovskite of PTAMAPbI₄ can be formed on the surface of MAPbI₃ (PTAI‐MAPbI₃) by controllable PTAI intercalation by either spin coating or soaking. The PTAMAPbI₄ capping layer can not only passivate PTAI‐MAPbI₃ perovskite but also act as MA⁺ locker to inhibit MAI extraction and significantly enhance the stability. The highly stable PTAI‐MAPbI₃ based perovskite solar cells exhibit a reproducible photovoltaic performance with a champion PCE of 21.16 %. Such unencapsulated devices retain 93 % of initial efficiency after 500 h continuous illumination. This steric mixed‐cation 2D perovskite as MA⁺ locker to stabilize the MAPbI₃ is a promising strategy to design stable and high‐performance hybrid lead halide perovskites.