Studies on calcium‐containing poly(urethane ether)s

The calcium salt of mono(hydroxyethoxyethyl)phthalate [Ca(HEEP)₂] was synthesized by the reaction of diethylene glycol, phthalic anhydride, and calcium acetate. Calcium‐containing poly(urethane ether)s (PUEs) were synthesized by the reaction of hexamethylene diisocyanate (HMDI) or tolylene 2,4‐diisocyanate (TDI) with a mixture of Ca(HEEP)₂ and poly(ethylene glycol) (PEG₃₀₀ or PEG₄₀₀) with di‐n‐butyltin dilaurate as a catalyst. A series of calcium‐containing PUEs of different compositions were synthesized with Ca(HEEP)₂/PEG₃₀₀ (or PEG₄₀₀)/diisocyanate (HMDI or TDI) molar ratios of 2:2:4, 3:1:4, and 1:3:4 so that the coating properties of the PUEs could be studied. Blank PUEs without calcium‐containing ionic diols were also prepared by the reaction of PEG₃₀₀ or PEG₄₀₀ with HMDI or TDI. The PUEs were well characterized by Fourier transform infrared, ¹H and ¹³C NMR, solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR, viscosity, solubility, and X‐ray diffraction studies. The thermal properties of the polymers were also studied with thermogravimetric analysis and differential scanning calorimetry. The PUEs were applied as top coats on acrylic‐coated leather, and their physicomechanical properties were also studied. The coating properties of PUEs, such as the tensile strength, elongation at break, tear strength, water vapor permeability, flexing endurance, cold crack resistance, abrasion resistance, color fastness, and adhesive strength, were better than the standard values. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2865–2878, 2003     

Little Grothendieck's theorem for sublinear operators

Let SB(X,Y) be the set of the bounded sublinear operators from a Banach space X into a Banach lattice Y. Consider π₂(X,Y) the set of 2-summing sublinear operators. We study in this paper a variation of Grothendieck's theorem in the sublinear operators case. We prove under some conditions that every operator in SB(C(K),H) is in π₂(C(K),H) for any compact K and any Hilbert H. In the noncommutative case the problem is still open.     

Annealing behavior of gel‐spun polyethylene fibers at temperatures lower than needed for significant shrinkage

The annealing at 373 K of ultrastrong, gel‐spun polyethylene (PE) has been studied. At this temperature, the fibers show no significant shrinkage. Still, a significant decrease in the mechanical properties is observed. The fibers have been analyzed with differential scanning calorimetry (DSC), temperature‐modulated differential scanning calorimetry (TMDSC), atomic force microscopy (AFM), and small‐angle X‐ray scattering (SAXS). During the annealing, the glass transition of the intermediate phase is exceeded, as shown by DSC. When split for structure analysis by AFM, the annealed fibers undergo plastic deformation around the base fibrils instead of brittle fracture. The quasi‐isothermal TMDSC experiments are compared to the minor structural changes seen with SAXS and AFM. The loss of performance of the PE fibers at 373 K is suggested to be caused by the oriented intermediate phase, and not by major changes in the structure or morphology. The overall metastable, semicrystalline structure is shown by TMDSC to posses local regions that can melt reversibly. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 403–417, 2003     

Dynamic mechanical thermal analysis transitions of partially and fully substituted cellulose fatty esters

The main transitions of cellulose fatty esters with different degrees of substitution (DSs) were investigated with dynamic mechanical thermal analysis. Two distinct main relaxations were observed in partially substituted cellulose esters (PSCEs). They were attributed to the glass‐transition temperature and to the chain local motion of the aliphatic substituents. The temperatures of both transitions decreased when DS or the number of carbon atoms (n) of the acyl substituent increased. Conversely, all the transitions of fully substituted cellulose esters occurred within a narrow temperature range, and they did not vary significantly with n. This phenomenon was explained by the formation of a crystalline phase of the fatty substituents. The presence of few residual OH groups in PSCEs was responsible for a large increase in the storage bending modulus, and it eliminated the effect of n on damping. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 281–288, 2003     

The non-isotropic character of electric and dielectric properties of ammonium zinc chloride crystal

The dielectric constant, ε, and the d.c. conductivity, σ, were measured along the a-, b- and c-axes of (NH₄)₂ZnCl₄ (AZC) crystal in the 300-450 K temperature range. Crystals of AZC grown from aqueous solutions containing excess of ZnCl₂ were used. The value of the dielectric permittivity of AZC is extremely small compared to other ferroelectric crystals. Pronounced broad or step-like peaks at the phase transition temperatures were detected along the a- and b-axes, while ε along the c-axis is temperature independent up to the end of the measuring range. Reciprocal of the dielectric permittivity in the range of the commensurate to incommensurate phase transition obeys a relation similar to the Curie-Weiss law that is valid for second order ferroelectric/paraelectric phase transitions. The constants of the proposed relationship applied to the cooling run are given. The J-E characteristics along the three crystallographic axes were measured in the normal, incommensurate, commensurate and antiferroelectric phases. Hence, the type of conduction mechanism has been estimated. Parameters of Poole-Frenkel and Richardson-Schottky types of conduction mechanism have been determined. The effect of applied electric field on the conductivity measurement was also tested. Conductivity anomalies with different character were observed at the phase transition temperatures. The lnσ−1000/T dependence revealed thermal activation energy of conduction along the a-, b- and c-axes with different values in different phases of AZC.     

On the origin of irreproducible behaviour of Na1−xLixNbO3 solid solutions

The irreproducibility of electrical properties of Na_0.88Li_0.12NbO₃ solid solution on thermal cycling reported by M.A.L. Nobre and S. Lanfredi is explained by gradual decomposition of the supersaturated solid solution below ca. 800 °C.     

Optical and electric properties of Nb-doped anatase TiO2 single crystal

Nb-doped anatase TiO₂ single crystal has been grown by chemical vapour transport method. Raman spectra shows that the obtained crystal with Nb of 0.08 wt% has typical anatase structure. An absorption band was observed at around 2.2 eV, which seems to be due to the d-d transition in the conduction band. The electron paramagnetic resonance and electric resistivity measurements show that the doped niobium makes quite shallow donor level whose orbital is d_xy-like centered at the titanium position of anatase.     

EPR investigations of oxidation effects in (V1−xMox)2−δO3

Electron paramagnetic resonance (EPR) investigations has been carried out on the new family of molybdenum doped vanadium sesquioxides (V_1−xMo_x)_2−δO₃. The oxidation effects were monitored from the rate of paramagnetic V⁴⁺ created when the sample is exposed to the air. The effects of the oxidation time, sample temperature, and annealing at 1000 °C under a diluted hydrogen atmosphere on the EPR signal features are analyzed. The V⁴⁺ concentration in the oxidized samples is determined and the relaxation effects driven by the conduction electrons are pointed out from the thermal behaviour of the EPR line features. EPR spectra of all the oxidized samples also reveal a small ferromagnetic contribution strongly correlated with the V⁴⁺ content.     

Steady-state analytical solutions for the lattice boltzmann equation

A general class of analytical solutions of the lattice Boltzmann equation is derived for two-dimensional, steady-state unidirectional flows. A subset of the solutions that verifies the corresponding Navier-Stokes equations is given. It is pointed out that this class includes, e.g., the Couette and the Poiseuille flow but not, e.g., the basic Kolmogorov flow. For steady-state non-unidirectional flows, first and second order solutions of the lattice Boltzmann equation are derived. Practical consequences of the analysis are mentioned. Differences between the technique applied here and those used in some earlier works are emphasized.