非晶钛酸铋的晶化过程

利用差热分析、X射线衍射和透射电子显微镜等技术对溶胶-凝胶法合成的凝胶的晶化过程进行了分析，实验结果表明，Bi₄Ti₃O₁₂非晶凝胶晶化过程经历了四个过程：首先在433℃先形成了Bi₂O₃和TiO₂亚稳相，然后在488℃时TiO₂亚稳相与Bi₂O₃反应形成Bi，Ti复合氧化物亚稳相Bi₂T 关键词： 钛酸铋 铁电材料 溶胶凝胶 非晶 晶化过程     

单光子LIF方法研究亚硝基苯266 nm光解动力学

用266nm激光解离亚硝基苯（C6H5NO）产生光解碎片NO,并利用单光子激光诱导荧光（LIF）技术（X^2Ⅱv″=0→A^2∑^+v′=0）测得初生态光解产物NO的振转光谱。根据计算所得的模拟光谱对光解碎片NO（X,v^″＝0）的转动量子数J″进行了归属,得到了量子数最大到J″＝50．5的转动能级的相对布居,这表面光解碎片NO具有较高的转动激发。提出了C6H5NO在266nm下可能的光解机理。     

高损伤阈值三倍频分离膜

 设计了Nd：YAG激光用三倍频分离膜,膜层材料为SiO₂和HfO₂。经过优化,膜系在355 nm处的反射率在99%以上,在532 nm和1 064 nm处透射率也在99%以上。采用电子束蒸发技术,在熔融石英基底上制备了样品,经测量,制备的分离膜光学性能与设计值接近。分离膜在355 nm激光辐照下的损伤阈值为5.1 J/cm²,并用微分干涉显微镜表征了薄膜损伤形貌。     

Stroboscopic microscopy—direct imaging of structure development and phase separation during spin‐coating

Spin‐coated polymer blends possess a rich variety of accessible non‐equilibrium morphologies, formed through a process of phase separation and self‐assembly, the complexities of which remain incompletely understood. The technique of stroboscopic microscopy has now been developed to allow direct observations of microscopic and mesoscopic morphological development during spin‐coating and has afforded unequivocal information regarding morphological development. The technique so far has three modes of operation providing information on topographical, compositional, and crystal development. In this review, we look at the technique's development, its applications and comment on the future potential for this technique. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 17–25     

One dimensional main-chain crystallization kinetics of poly(3-octylthiophenes) investigated by infrared spectroscopy

Time-resolved infrared spectroscopy has been used to study the melt crystallization behavior of poly(3-octylthiophenes) (P3OT), which is a typical conductive polymer among the family of poly(3-alkylthiophenes) (P3ATs). It is found that, during the isothermal crystallization process at high temperature, the alkyl side chains of P3OT always keep in disordered state, whereas the ordering packing of conjugated backbone takes place. In order to reveal the structural changes and the crystallization kinetics corresponding to the main-chain ordering process, two spectral regions that associated with π–π stacking and the effective conjugation length of P3OT have been analyzed in detail. The characteristic IR bands of crystalline and amorphous phase are identified in each spectral region. Moreover, a simple spectral method has been proposed to calculate the evolution of crystallinity during the isothermal crystallization process of P3OT. Of particular note, the distinct one-dimensional growth kinetic of P3OT crystal has been revealed by Avrami analysis.     

Self-Reguiating Poiycondensations. II. A Study of the Order Present in Polyamide-Hydrazides Derived from Terephthaloyl Chloride and p-Aminobenzhydrazide

The problem of chemical order of polyamide-hydrazides prepared from terephthaloyl chloride with an unsymmetrical monomer, p-aminobenzhydrazide, is discussed. An NMR method for identifying the molecular structure of species formed in the early stages of poly condensation has enabled the course of a polymerization to be followed during this time and the final degree of order to be predicted qualitatively. These studies have provided a demonstration that the structure of these polymers can be controlled to a significant degree by appropriate variations in experimental conditions. But even under the most adverse conditions usually employed, poly amide-hydrazides are found to be at least “partially ordered” copolymers. The techniques developed for this study may find application in the study of other polymer forming reactions with monomers having two functional groups with dissimilar reactivities.     

Flash DSC crystallization study for blown film grade bimodal HDPE resins. I. Isothermal kinetics and its application of the blown film modeling

Isothermal ultra‐cooling crystallization tests were conducted on three blown film grade bimodal HDPE resins using an ultrafast scanning calorimeter, the Flash DSC. Isothermal tests were performed to study the regime transition, the thermal nucleation and the spherulitical growth using the Hoffman‐Lauritzen theory in a range between 90 °C and 116 °C. Temperature profile estimations using such data were in good agreement with actual blown film process data. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2425–2431     

Shear-induced nonisothermal crystallization of two grades of PLA

Shear-induced nonisothermal crystallization of two commercial polylactides (PLAs) differing in optical purity was studied. The molten polymers were sheared at selected temperatures (T_s) and subsequently cooled. The crystallization was followed by a light depolarization method, whereas the specimens were analysed ex-situ by DSC, 2D-WAXS and SEM after etching. It was found that the effect of shear, especially on the crystallinity developed during post-shearing cooling, intensified with a decrease of T_s from 160 to 146 ^°C, and with increasing shear rate and strain. Moreover, the effect of shear on PLA1.5 with d-lactide content of 1.5% was stronger than PLA2.8 with 2.8% of d-lactide, although maximum crystallinity of both polymers was practically the same. A decrease of cooling rate from 30 to 10 ^°C/min increased crystallinity of both PLAs, except for those shearing conditions which induced high crystallinity even during faster cooling. Although SEM examination revealed some row-nucleated forms, no significant crystal orientation was detected by 2D-WAXS, indicating that, under the experimental conditions, the shear induced predominantly point-like nuclei.     

Peptide‐poly(ε‐caprolactone) biohybrids by grafting‐from ring‐opening polymerization: Synthesis,aggregation, and crystalline properties

Well‐defined peptide‐poly(ε‐caprolactone) (Pep‐PCL) biohybrids were successfully synthesized by grafting‐from ring‐opening polymerization (ROP) of ε‐caprolactone (CL) using designed amine‐terminated sequence‐defined peptides as macroinitiators. MALDI‐TOF‐MS and ¹H NMR analyses confirmed the successful attachment of peptide to the PCL chain. The gel permeation chromatography (GPC) measurement showed that the Pep‐PCL biohybrids with controllable molecular weights and low polydispersities (PDI <1.5) were obtained by this approach. The aggregation of Pep‐PCL hybrid molecules in THF solution resulted in the formation of micro/nanospheres as confirmed through FESEM, TEM, and DLS analyses. The circular dichroism study revealed that the secondary structure of peptide moiety was changed in the peptide‐PCL biohybrids. The crystallization and melting behavior of Pep‐PCL hybrids were somewhat changed compared with that of neat PCL of comparable molecular weight as revealed by DSC and XRD measurements. In Pep‐PCL biohybrids, extinction rings were observed in the PCL spherulites, in contrast with the normal spherulite morphology of the neat PCL. There was a substantial decrease (4–5 folds) in the spherulitic growth rate after the incorporation of peptide moiety at the end of PCL chain as measured by polarizing optical microscopy. Pseudomonas lipase catalyzed enzymatic degradation was studied for Pep‐PCL hybrids and neat PCL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012