Compositional Profiles in Silica-Based Sol-Gel Films Doped with Erbium and Silver, by RBS and ERDA

Photosensitive organic-titania hybrid materials have been prepared from metal alkoxides and various organic ester compounds with double bonds. The refractive index of the film increases with the decrease of the concentration of the organic ester compound, and the highest refractive index of 1.62 is obtained when 2-hydroxymethyl acrylate (HOA) is used as the organic ester and the molar ratio of HOA to Ti is 0.5. The material with the highest refractive index is exposed to femtosecond pulse using the multi-beam laser interference technique. After laser irradiation, the irradiated parts of the material are photopolymerized and periodic structures can be obtained by development of the unirradiated parts. In the case of laser irradiation of 120 J total energy for 5 min, the periodic structure obtained corresponds to 2D photonic crystal structure which is composed of two parts; the material with the highest refractive index and the air.     

The Effect of Cyclodextrins on the Photochemical Stability of 7-Amino-4-methylcoumarin in Aqueous Solution

The effect of -, - and -cyclodextrin onthe photochemical stability of 7-amino-4-methylcoumarin (C120)was studied. Using spectroscopic techniques (UV/Vis absorption spectroscopy, fluorescence, fluorescence anisotropy and circular dichroism) combined with HPLC/MS and MS analysis it was demonstrated that addition of -cyclodextrin to the aqueoussolution of C120 markedly inhibits the photodegradation of that dye. This results from theformation of an inclusion complex between C120 and -cyclodextrin.     

Mixing properties of mim diodes in the infrared

Point contact MIM diodes of different materials have been tested as harmonic mixers at 29 THz and 88 THz. From the analysis of the I-V static characteristic quantitative informations have been obtained about the effectiveness of the diodes as high order mixers.     

激光诱导等离子体中的电子密度和电子温度的测量

脉冲激光诱发等离子体的谱诊断技术用来对其电子密度和电子温度的测量结果与理论计算进行了比较，同时讨论了运用这个方法的物理条件．     

Nanowire‐Based Electrochemical Biosensors

We review recent advances in biosensors based on one‐dimensional (1‐D) nanostructure field‐effect transistors (FET). Specifically, we address the fabrication, functionalization, assembly/alignment and sensing applications of FET based on carbon nanotubes, silicon nanowires and conducting polymer nanowires. The advantages and disadvantages of various fabrication, functionalization, and assembling procedures of these nanosensors are reviewed and discussed. We evaluate how they have been used for detection of various biological molecules and how such devices have enabled the achievement of high sensitivity and selectivity with low detection limits. Finally, we conclude by highlighting some of the challenges researchers face in the 1‐D nanostructures research arena and also predict the direction toward which future research in this area might be directed.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

Electromagnetic interference shielding and radiation absorption in thin polypyrrole films

Results of permittivity measurements, electromagnetic interference shielding effectiveness, and heat generation due to microwave absorption in conducting polymer coated textiles are reported and discussed. The intrinsically conducting polymer, polypyrrole, doped with anthraquinone-2-sulfonic acid (AQSA) or para-toluene-2-sulfonic acid (pTSA) was applied on textile substrates and the resulting materials were investigated in the frequency range 1-18 GHz. The 0.54 mm thick conducting textile/polypyrrole composites absorbed up to 49.5% of the incident 30-35 W microwave radiation. A thermography station was used to monitor the temperature of these composites during the irradiation process, where absorption was confirmed via visible heat losses. Samples with lower conductivity showed larger temperature increases caused by microwave absorption compared to samples with higher conductivity. A sample with an average sheet resistivity of 150 Ω/sq. showed a maximum temperature increase of 5.27 °C, whilst a sample with a lower resistivity (105 Ω/sq.) rose by 3.85 °C.     

Characterization of CNS disorders and evaluation of therapy using structural and functional MRI

Modern drug development requires technologies that allow rapid translation from the preclinical to the clinical stage. It is obvious that non-invasive imaging modalities such as magnetic resonance imaging (MRI) will play a central role in this regard. This article reviews the use of structural and functional MRI readouts for characterization of central nervous system (CNS) disorders and evaluation of the efficacy of potential CNS drugs. Examples comprise dementia of Alzheimer's type, cerebral ischemia, and neuroinflammation covering both clinical and preclinical aspects. In these examples MRI has been used to obtain relevant structural information on brain atrophy, on the location and extent of ischemic brain areas, and on the number and distribution of demyelinated plaques. These structural data are complemented by readouts assessing the functional consequences associated with the pathomorphological changes. In the last decade, MRI has evolved into a standard tool for the development of CNS drugs. With regard to target-specific/molecular imaging applications MRI is limited by its inherently low sensitivity; complementary imaging modalities utilizing optical and radionuclear reporter systems will thus be required.     

Experimental and computational studies of intracomplex reactions in Mg+(primary, secondary alkylamine) complexes induced by photoexcitation of Mg+

We report herein a comprehensive study of photoinduced reactions in complexes of Mg+ with primary (n-propyl- and isopropylamine) and secondary amines (dipropyl- and diisopropylamine) in the spectral range of 230-440 nm. Similar to the methyl- and ethylamine complexes studied previously, N-H bond activation of these complexes is very unfavorable. Instead, the C(alpha)-C, C-N, and C(alpha)-H bond-cleavage photoproducts are observed after photoexcitation of the Mg+ complexes (3(2)P<--3(2)S). For Mg+(primary amine) complexes, for example, Mg+-NH2CH2CH2CH3, and Mg+-NH2CH(CH3)2, the photoproducts resulting from C(alpha)--C rupture prevail after P(z) and charge-transfer excitations, whereas the Mg+ photofragment is predominant upon P(x,y) excitation. However, with further N-alkyl substitution, as in Mg+(secondary amine) complexes, for example, Mg+-NH(CH2CH2CH3)2 and Mg+-NH[CH(CH3)2]2, a novel intracomplex C-C coupling photoreaction dominates on P(x,y) excitation of Mg+, which is believed to arise from Mg+* insertion into the C-N bond. With P(z) and charge-transfer excitation, the Mg-R elimination photoproducts, arising from C(alpha)-C bond cleavage, predominate. The energetics and possible mechanisms of the intracomplex photoreactions are analyzed in detail with the help of extensive quantum mechanics calculations.