Determination of the octane number of a fuel by the IR spectroscopy method

The near-IR spectroscopy method of control of the octane number (o.n.) of a fuel is studied. An analysis is made of a device developed as an alternative of a measuring system based on a nonselective IR radiation source and of an analyzer based on a laser semiconductor diode. It is shown that the use of the methods of multicomponent regression analysis of spectral data allows measurement of the octane number with an accuracy of S ∼ 0.17 octane number units. The characteristics of the semiconductor laser-based analyzer are investigated and the parameters of radiators are discussed that provide the required sensitivity of the measuring system (up to 10⁻⁴ with respect to optical absorption) in controlling the octane number of a fucl. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 67, No. 2, pp. 244–248, March–April, 2000.     

Photon and Ion-Beam Induced Processes in Materials Studied by Hyperfine Interactions

Laser nitriding and laser cementation are investigated by Mössbauer spectroscopy and complementary methods. It is demonstrated how the backscattering versions of Conversion Electron and Conversion X-ray Mössbauer spectroscopy can contribute to the investigation of surface processes, like the laser-induced formation of nitrides and carbides. Additionally, the formation of semiconducting iron disilicide can be achieved by ion-beam mixing and pulsed laser irradiation of Fe/Si bilayers. The results of both processes are compared.

     

Advantages of endoscopic laser arytenoidectomy using yag laser scalpel

The surgical management of bilateral vocal cord paralysis has been performed through an endoscope in the past. The etiology of bilateral vocal cord paralysis is usually secondary to trauma; to secure an adequate airway, a tracheostomy is performed. Endoscopic laser arytenoidectomy offers a safe method of decannulating patients with maintenance of good voice quality and a rima glottidis of 4–6 mm posteriorly. Several wavelengths are available to carry out this procedure, and this article will focus on Nd:Yag laser scalpel applications. The advantage of this method is the preservation of good voice quality with an option of an external procedure, if the need arises. The laser application offers excellent hemostasis, and decreased edema and scar tissue formation. The results of our study on 10 patients appear encouraging and superior with respect to other available wavelengths.     

高重复率XeCl准分子激光器的放电特性

本文报道紫外预电离放电泵浦的高重复率XeCl准分子激光器的放电特性,分析了放电参数的改变对放电过程的影响.最佳转换效率达2.2%.     

光信息综合实验中光源的选择和性能改善

在光信息综合实验中,在分析氦氖激光器的优缺点的基础上,阐述了半导体激光器的显著优点以及存在的一些局限性。利用实验室现有的器件,引导学生对半导体激光器进行了光束准直和整形以提高激光器的性能,并用已优化的半导体激光器作为光源进行了全息光栅和全息透镜的制备以及电光调制和液晶光阀等实验。结果表明,性能改善的半导体激光器完全可以取代氦氖激光器,可满足光信息综合实验的要求。在整个设计制作过程中,培养了学生分析问题和解决问题的能力。     

远红外可调谐喇曼激光器理论

本文用缀饰原子方法解出四能级系统远红外激光增益系数的解析表达式。结果表明,远红外增益谱一般由四个共振峰组成,取合适的失谐量,可能得到两个正的增益极大,并分别对应于喇曼增益和线中心增益。     

Analysis of banding problem in multiple beam scanning system of laser printer

In the slant scanning method of multiple beams a misalignment of the slant angle causes a beam spacing error and pitch irregularities of scan lines called “banding”. This paper evaluates the pitch irregularities and tries to clarify the allowable beam spacing error. The following results are obtained: (1) The maximum spacing error of print lines is proportional to m/(dpi), where m is the number of multiple beams and dpi print dot density. (2) The noticeable limit of periodic variations of print density at low spatial frequency was presumed to be a visibility between 1 and 2% in experiments. (3) The allowable beam spacing error was calculated introducing the human eye spatial frequency response. (4) The banding simulation experiments by laser recording on the photographic paper on the XY stage showed good coincidence with the theoretical evaluations.     

Topology optimization of microfluidic mixers

This paper demonstrates the application of the topology optimization method as a general and systematic approach for microfluidic mixer design. The mixing process is modeled as convection dominated transport in low Reynolds number incompressible flow. The mixer performance is maximized by altering the layout of flow/non‐flow regions subject to a constraint on the pressure drop between inlet and outlet. For a square cross‐sectioned pipe the mixing is increased by 70% compared with a straight pipe at the cost of a 2.5 fold increase in pressure drop. Another example where only the bottom profile of the channel is a design domain results in intricate herring bone patterns that confirm findings from the literature. Copyright © 2008 John Wiley & Sons, Ltd.     

Nearly Vertical Hopf Bifurcation for a Passively Q-Switched Microchip Laser

Passively Q-switched microchip lasers generate strongly pulsating intensity oscillations that emerge from a Hopf bifurcation point. We show that this bifurcation is nearly vertical and explain why strongly pulsating oscillations are immediately observed as we pass the Hopf bifurcation point. The laser dynamical problem is mathematically a singular perturbation problem which we investigate. The leading order problem is conservative and corresponds to Lotka–Volterra equations.