Application of nanodiamonds in human body fluid analysis by matrix-assisted laser desorption/ionization mass spectrometry

Direct mass spectrometric analysis of complex biological samples is very important and challenging. In this paper, nanodiamonds have been successfully used in matrix-assisted laser desorption/ionization mass spectrometric analysis of human serum and urine. As a practical tool and platform, it can be widely used in the field of humoral proteomics, and it plays a very promising role in clinical diagnosis, including identification of novel disease-associated biomarkers.     

光热偏转技术测量Sr_(2-x)Sm_xFeMoO_6材料的热扩散率

采用固体烧结法制备了Sr2-xSmxFeMoO6(x=0,0.03,0.05,0.08,0.10,0.13,0.15,0.20)多晶结构样品,用X射线衍射对材料的结构进行了检测。通过光热偏转技术方法对该材料的热扩散率进行了研究,给出了掺杂比例与材料热扩散率的关系曲线,结果发现Sr2FeMoO6样品随着参杂Sm浓度的增加,结构发生变化的同时,样品的热扩散率也随着波动变化。这与文献[1]中给出的结论有明显不同,从声子、电子、自旋及其相互作用角度揭示了与文献[1]不同的根本原因;并且从x射线和热扩散率两个角度给出了样品Sr2-xSmxFeMoO6结构转变的参杂比例在10—13%的范围,说明光热偏转技术方法是研究参杂镧系元素的双钙钛矿结构和电子参杂效应的可行有效方法。     

激光板条设计

侧面光泵的固体激光工作介质采用端面为布儒斯特角的板条形状有许多优点。文章推导了确定板条结构参数的一组公式，讨论了厚度对泵浦光透射损失的影响，认为厚度不宜小于吸收深度。对于ＹＡＧ 之类高折射材料，尖角内是没有振荡光束通过的，可以磨掉。相应地长度应加大０－１３ 倍厚度。     

Power spectra and spatial pattern dynamics of a ring laser

Experimental measurements of power spectra of a single longitudinal and transverse mode ring dye laser are presented that reveal the critical slowing down of the laser near threshold. External pump noise serves as a probe of the frequency response of the dye laser. Detailed comparisons of the spectral characteristics with computer simulations and an approximate analytic theory are given. The dynamics of spatial pattern formation in a multimode dye laser is examined through measurements of first-passage-time distributions. A comparison of the experiments with computer simulations based on a simple theoretical model of the two-mode laser shows qualitative agreement. These measurements indicate that there are a variety of complex phenomena associated with the transverse mode pattern formation dynamics that need to be addressed theoretically and studied further experimentally.     

Pulsed laser thin film growth of di-octyl substituted polyfluorene and its co-polymers

Matrix-assisted pulsed laser deposition (PLD) allows a controlled layer-by-layer growth of polymer films. Di-octyl substituted polyfluorene (PF8) and its copolymers were deposited as thin films using matrix-assisted PLD by employing a KrF excimer laser with a fluence of 125 mJ/pulses. The optical and structural properties of these films are compared with spincoated films via Raman spectroscopy, absorption and photoluminescence. The Raman spectra of both PLD and spincoated films are similar indicating that the polymer films deposited via PLD maintain their molecular structure. Both the spincoated and the PLD grown PF8 films that were cast from toluene show the presence of the β phase. Benzothiadiazole substituted PF8 (F8BT) and butyl phenyl-substituted PF8 (PFB) PLD grown films show a slightly broader emission compared to the spincoated films, which is attributed to an enhanced intermolecular interaction in the PLD grown thin films.     

Multifrequency Diagnostics of a Vibrationally Equilibrium CO2-Containing Gas Mixture

We present a technique which makes it possible to simultaneously determine the temperature T and the partial pressure of carbon dioxide in a vibrationally equilibrium gas mixture at atmospheric pressure by using the experimentally measured spectral distribution of the absorption factor at the oscillation lines of a tunable CO₂ laser. The technique developed can be employed for monitoring both the energy efficiency and the ecological purity of the processes of combustion of large amounts of hydrocarbon fuels accompanied by release to the atmosphere of combustion products containing carbon dioxide.     

Thermal Lensing, Laser Performance at 1.06 μm and 0.53 μm of a NYAB Laser End pumped by a Diode laser array

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｓｅｌｆ ｆｒｅｑｕｅｎｃｙ ｄｏｕｂｌｉｎｇｌａｓｅｒｃｒｙｓｔａｌｓ,ｗｈｉｃｈｃｏｍｂｉｎｅｔｗｏｄｉｆｆｅｒｅｎｔｆｕｎｃｔｉｏｎｓｏｆｌａｓｅｒｅｍｉｓｓｉｏｎａｎｄｆｒｅｑｕｅｎｃｙｃｏｎｖｅｒｓｉｏｎ ,ｐｒｏｖｉｄｅａｓｉｍｐｌｅｗａｙｏｆｇｅｎｅｒａｔｉｎｇｃｏｈｅｒｅｎｔｖｉｓｉｂｌｅｒａｄｉａｔｉｏｎ .Ａｍｏｎｇｔｈｅｖａｒｉｏｕｓｓｅｌｆ ｆｒｅｑｕｅｎｃｙ ｄｏｕｂｌｉｎｇｃｒｙｓｔａｌｓ ,ｎｅｏｄｙｍｉｕｍｙｔｔｒｉｕｍａｌｕｍｉｎｕｍｂｏｒａ…     

Formation of microvias in epoxy-glass composites by laser ablation

Single CO₂ laser pulses, of 10.6μm wavelength, are used to form blind microvias (holes in electronic boards for through-plating conducting paths) in copper-clad epoxy-glass laminates. The microvia dimensions depend on pulse energy and duration, the thicknesses of the epoxy-glass laminate and copper cladding, and the distribution of glass within the epoxy-glass laminate. The useful range of laser parameters, especially pulse energy, is primarily determined by the ability to metallize subsequently the blind microvias. Several conclusions can be drawn from the data. The pulse enegy should be within ±20% of the optimum value in order to form vias with a cylindrical geometry. For 300 μm thick laminates, the thickness of the copper on the bottom should be 18 μm or more. A larger range of pulse energies could be used if the glass fibre density was more uniform and if subsequent copper metallization of the blind vias could be improved.     

激光表面纹理化过程中的Rayleigh-Taylor不稳定性

用表面纹理化的热模型 ,分析了固体表面的熔化和重固化的物理过程 ,计算了在纹理化过程中的表面温度、穿透深度、熔化深度、相面移动速度等物理量 ,提出了 Rayleigh-Taylor不稳定性形成周期化结构的机理。     

Power efficiency of a semiconductor laser with an external cavity

Optical feedback modifies the power vs. current diagram of a laser diode as well as its spectrum. Though optimization of the spectral characteristics is usually the main goal in the design of an external cavity source, power efficiency is also important, especially with relatively high power devices, where temperature variations due to dissipation can have an impact on the wavelength stability and on the laser lifetime. A useful parameter to describe the total power efficiency of the stabilized laser, relative to that of the solitary laser, is proposed in this paper. The dependence of this parameter on the characteristics of the active device, and of the external cavity, is investigated.