激光金属汽化汽离混合区状态参量的稳定性及其影响因素分析

在汽离混合区激光强度时空修正的基础上,近似求解了流体力学模型下的状态参数,找出了稳定状态参数的共同自洽参量,分析了自洽参量的取值方法,研究了相关参数对自洽参量的影响机制,结果发现:(1)汽离混合区内,状态参量的稳定性可用自洽参量的稳定性来表征;(2)当入射激光强度小于108W.cm-2时,自洽参量随入射激光强度变化相对较快,稳定性差;当激光强度大于108W.cm-2时,自洽参量随入射激光强度变化相对较慢,稳定性高;(3)汽离混合区各处的约化自洽参量随辐照激光的波长成变周期增加的变化,波长越长,约化自洽参量越大;(4)要使自洽参量稳定,纹波较小,宜采取短波激光辐照;(5)当蒸汽压强小于2.7×106Pa时,自洽参量随蒸汽压强成指数递减规律变化;当蒸汽压大于2.7×106Pa时,自洽参量与蒸汽压强之间没有对应关系.     

Tunable subnanosecond laser pulse generation using an active mirror concept

We report (theory, experimental check) an improved approach for generation of a tunable, subnanosecond pulse (0.1–0.4 ns), based on a single pulsation (“spike”) separation from the transient oscillations in a dye laser with active mirror (AMIR). A pumping by 20–50 ns pulses from Q-switched Nd:YAG laser is considered. The separation is in original, two-spectral selective channels cavity, where the forced by AMIR quenched generation at one of the wavelength stops initially started spiking generation at the other wavelength after the first spike development. The AMIR quickly starts the quenching generation at a precisely controlled moment and with necessary intensity thus assuring the desired separation. An advantage is a high reproducibility of the separation for high (~250%) pump power fluctuations combined with tuning in large range (~20 nm). To obtain such an operation we form ~1 ns leading front pump pulse by electrooptical temporal cutting of the input pump pulse and use an optical delay line. This increases also a few times the power in the separated spike (to be ~100 kW). Our approach widens the combinations of lasers for effective applications of spike separation technique (dye lasers excited by Q-switched solid-state or Cu-vapor lasers).     

The role of F A1:Ag+ defects in laser light generation and coadsorption of CO and halogen atoms at the KCl and KBr surface sites. First principles calculations

F _A1:Ag⁺ color center at the low coordination (100) and (110) surface sites of KCl and KBr thin films play an important role in providing tunable laser oscillation and adsorbatesubstrate interactions. Double-well potentials at this site are investigated using ab initio molecular electronic structure calculations. The calculated Stokes shifted (optical transition bands), opticaloptical conversion efficiencies, the probability of orientational destruction, exciton (energy) transfer and Glasner-Tompkins empirical rule suggest that laser light generation is sensitive to (i) the lattice anion, (ii) the coordination number of surface ions, and (iii) the choice of the basis set centered on the anion vacancy. The adsorbate-substrate interactions were found to be dependent on the electronegativity of the adatom and on the lattice anion. Optimised geometries and the coadsorption of CO and (F, Cl, Br, I) on KCl and KBr (100) crystals are presented. Calculated chemisorption energies for CO on the (halogen atom/defect free sites of KCl and KBr (100) crystals) showed that the coadsorption of halogen atom tends to block other adsorbate-substrate interactions at the nearest neighbour sites. Thus if halogen atom coverage increases, the CO prefers to be adsorbed on the K⁺ site of the KCl and KBr (100) surfaces and on KBr relative to KCl.      

Study of the conditions for the effective energy transfer in a process of acceleration and collision of the thin metal disks with the massive target

Efficiency studies of laser driven thin metal disks acceleration using the first harmonic (λ₁=1.315 μm) of the Prague Asterix Laser System (PALS) and subsequent craters creation produced by collisions of these disks with massive targets are presented. Several different disks made of aluminium and copper foils with diameters of 300 μm and 600 μm and thicknesses of 11 μm (Al) and 3.6 μ m (Cu) were employed. Disks were placed at the distance of either 100 μ m or 300 μm in front of aluminium massive targets. The following irradiation conditions were used: the laser beam energy of 120 J, the focal spot diameter of 200 μm, and the pulse duration of 0.4 ns (FWHM). A three-frame interferometric system was employed to determine electron density distributions in plasma corona. Shape and volume of craters were obtained by crater replica technology and microscopy measurements. The aim of these investigations was to analyse conditions leading to the most effective energy transfer in the process of collision of the accelerated disks with solid targets. The overall efficiency of these processes was characterized by the volume of craters produced in such targets.     

Ultra fine carbon nitride nanocrystals synthesized by laser ablation in liquid solution

Crystalline carbon nitride nanopowders and nanorods have been successfully synthesized at room temperature and pressure using the novel technique of pulsed laser ablation of a graphite target in liquid ammonia solution. High-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and Fourier transform infrared spectroscopy (FTIR) were used to systematically study the morphology, nanostructure and chemical bonding. The experimental composition and structure of the nanoparticles are consistent with the theoretical calculations for α-C₃N₄. After 2 h ablation the particles had a size distribution ∼8–12 nm, whereas after 5 h ablation the particles had grown into nanorod-like structures with a crystalline C₃N₄ tip. A formation mechanism for these nanorods is proposed whereby nanoparticles are first synthesized via rapid formation of an embryonic particle, followed by a slow growth, eventually leading to a one-dimensional nanorod structure.     

Progress in direct-drive inertial confinement fusion research at the laboratory for laser energetics

Direct-drive inertial confinement fusion (ICF) is expected to demonstrate high gain on the National Ignition Facility (NIF) in the next decade and is a leading candidate for inertial fusion energy production. The demonstration of high areal densities in hydrodynamically scaled cryogenic DT or D₂ implosions with neutron yields that are a significant fraction of the “clean” 1-D predictions will validate the ignition-equivalent direct-drive target performance on the OMEGA laser at the Laboratory for Laser Energetics (LLE). This paper highlights the recent experimental and theoretical progress leading toward achieving this validation in the next few years. The NIF will initially be configured for X-ray drive and with no beams placed at the target equator to provide a symmetric irradiation of a direct-drive capsule. LLE is developing the “polar-direct-drive” (PDD) approach that repoints beams toward the target equator. Initial 2-D simulations have shown ignition. A unique “Saturn-like” plastic ring around the equator refracts the laser light incident near the equator toward the target, improving the drive uniformity. LLE is currently constructing the multibeam, 2.6-kJ/beam, petawatt laser system OMEGA EP. Integrated fast-ignition experiments, combining the OMEGA EP and OMEGA Laser Systems, will begin in FY08.     

高功率脉冲激光对阶跃折射率多模光纤损伤机理

 理论分析和模拟仿真研究了激光点火系统中光纤端面损伤、光纤初始输入段损伤和光纤内部损伤机理。结果显示：端面损伤主要是由光纤端面的杂质和缺陷引起；光纤初始输入段损伤是由光束的初次反射造成光纤局部激光能量密度增大引起的；光纤内部体损伤主要由于激光自聚焦效应引起损伤和光纤受到的意外应力产生微小碎片，吸收激光能量，引起光纤局部损伤。给出了激光点火系统中提高光纤损伤阈值的一般方法，主要包括光纤端面处理、设计合理的激光注入耦合装置。     

激光清洗实时监测技术研究

针对目前在研激光清洗的实时监测问题进行实验和分析。得出两个结论:激光清洗具有传统方法无法具有的优越性,可以节省大量人力物力成为新型清洗方法而受到重视,激光清洗在设备维修保养中显示了良好的应用前景。激光清洗过程中产生的声发射信号包含了清洗过程的大量信息,利用声发射检测系统可以对激光清洗过程实时监控。     

非相干光纤激光组束中光栅参数的确定

光栅衍射效率是非相干光纤激光组束系统的关键,理论分析和数值仿真表明光栅衍射效率随着光栅频率和光栅厚度的减小而增大。全面综合考虑光栅频率应该选取在200mm-1和400mm-1之间,光栅厚度在1mm到2mm之间。同时提出了一种不等间隔方法提高系统总体衍射效率,该方法较等间隔条件下衍射效率提高了0.1651。     

基于Polytec激光测振仪的光存储设备振动测试分析系统

针对光存储设备振动频率高的特点,采用Polytec激光测振仪拾取振动信号,并给出了基于Polytec激光测振仪的光存储设备振动测试分析系统。可用于硬盘盘片、磁头滑块、折臂组件、光盘盘片等振动测试,为光存储设备动态特性的测试和分析建立了良好的实验基础。