空气呼吸模式CO2激光等离子体光谱观察

为了了解采用脉冲CO₂激光推进空气呼吸模式时光船参数等对产生等离子体的影响，介绍了利用实验室自行研制的紫外预电离TEA CO₂激光器进行的激光等离子体实验。实验采用底面直径为60mm、焦距为5mm和10mm的抛物面光船。介绍了空气呼吸模式激光等离子体的谱和明显的特征谱线，以及等离子体的时间演化过程。结果表明：空气呼吸模式等离子体的持续时间约为20μs，在6μs左右时信号强度达到最大值；激光脉冲作用后，信号迅速衰减；10mm光船产生的等离子体信号峰值和持续时间均略长于5mm光船的。     

General criterion to discern between coherent and incoherent synthesis of broadband coherent anti‐Stokes Raman spectra

Recently, the ordinary qualitative criterion on how to distinguish between coherent and incoherent convolutions of broadband coherent anti‐Stokes Raman (CARS) signals generated by degenerate pump lasers has been revised in view of a quantitative analysis. The revision has established that incoherent CARS approach can be justified as unitary limit of the function ] erfc(Γ/σ₁)/σ₁, where Γ and σ₁ are respectively the spectral widths of the Raman line and the degenerate pump lasers. The result was, however, limited to nonoverlapping Raman lines. In this work, the extension to a more common situation of closely spaced Raman transitions is considered. For large overlap between adjacent Raman lines, the new analysis suggests significant deviations from the previous result. Weak line mixing is also taken into consideration. Nonetheless, all types of deviations are characterized by a common tendency toward the incoherent limit. Copyright © 2007 John Wiley & Sons, Ltd.     

Precise measurement of hyperfine structure in the state of Rb

We demonstrate a technique to measure hyperfine structure using a frequency-stabilized diode laser and an acousto-optic modulator locked to the frequency difference between two hyperfine peaks. We use this technique to measure hyperfine intervals in the 5 P _3/2 state of ⁸⁵Rb and obtain a precision of 20 kHz. We extract values for the magnetic-dipole coupling constant A = 25.038(5) MHz and the electric-quadrupole coupling constant B = 26.011(22) MHz. These values are a significant improvement over previous results. Received 6 March 2003 Published online 15 April 2003     

Further Acceleration of MeV Electrons by a Relativistic Laser Pulse

With the development of photocathode rf electron gun, electrons with high-brightness and mono-energy can be obtained easily. By numerically solving the relativistic equations of motion of an electron generated from this facility in laser fields modelled by a circular polarized Gaussian laser pulse, we find the electron can obtain high energy gain from the laser pulse. The corresponding acceleration distance for this electron driven by the ascending part of the laser pulse is much longer than the Rayleigh length, and the light amplitude experienced on the electron is very weak when the laser pulse overtakes the electron. The electron is accelerated effectively and the deceleration can be neglected. For intensities around 10¹⁹ W•μm²/cm², an electron's energy gain near 0.1 GeV can be realized when its initial energy is 4.5 MeV, and the final velocity of the energetic electron is parallel with the propagation axis. The energy gain can be up to 1 GeV if the intensity is about 10²¹ W•μm²/cm². The final energy gain of the electron as a function of its initial conditions and the parameters of the laser beam has also been discussed.     

Modeling, measuring, and minimizing the instrument response function of a tunable diode laser spectrometer

The instrument response function (IRF) of a spectrometer limits the accuracy of measured spectroscopic parameters by broadening recorded spectral lines/features. We describe methods to model the effects of the IRF on spectral data, to minimize the IRF widths, and to measure the resulting width of the spectrometer IRF. We have modeled the IRF of our Tunable Diode Laser Spectrometer as a Voigt function. A real-time method of eliminating the effects of low-frequency spectrometer drift has been implemented and has resulted in a substantial reduction in the width of the IRF, its residual Gaussian component reduced from about to about . An accurate measurement of the IRF Gaussian width utilizes a computationally simple method making use of the spectral dependence of the RMS noise of each signal-averaged data point. Various noise sources affecting the spectrometer (preamp/detector noise, laser AM noise, and laser FM noise) are identified and separately quantified by use of the same method. The IRF Gaussian-width measurement can be automatically applied to each measured spectrum of an experimental data set. A related method is discussed which allows accurate determination of the spectral dependence of statistical noise appropriate for use in quantitative Chi-square fitting of absorption spectra. We explore simple, efficient numerical processes which can dramatically enhance the quality and usefulness of acquired spectral data, improving the ability to apply TDL spectroscopy to high-precision, quantitative measurements and the determination of detailed spectroscopic lineshape parameters. This paper provides a guide for interested readers to implement these developments in their own spectrometers.     

High-power continuous-wave operation of a diode-pumped laser at

The continuous-wave laser properties of an efficient diode-pumped Nd:GdVO₄ crystal operating at formed with a simple plane-concave cavity have been studied. With the incident pump power of 21 W, an output power of 6.9 W was obtained, giving an optical conversion efficiency of 32.8% and a slope efficiency of 35.3%. The laser characterization of two different Nd³⁺-doped concentration of Nd:GdVO₄ crystals were studied.     

Structured mirror array for two-dimensional collimation of a chromium beam in atom lithography

Direct-write atom lithography,one of the potential nanofabrication techniques,is restricted by some difficulties in producing optical masks for the deposition of complex structures.In order to make further progress,a structured mirror array is developed to transversely collimate the chromium atomic beam in two dimensions.The best collimation is obtained when the laser red detunes by natural line-width of transition 7S3 → 7P40 of the chromium atom.The collimation ratio is 0.45 vertically(in x axis),and it is 0.55 horizontally(in y axis).The theoretical model is also simulated,and success of our structured mirror array is achieved.     

基于法布里-珀罗调谐滤波器的傅里叶域锁模扫频激光光源

报道了一个光纤型1300 nm波段的傅里叶域锁模(Fourier domain mode locking, FDML)扫频激光光源, 用于扫频光学相干层析成像技术 (optical coherence tomography, OCT) 成像. 本实验扫频激光光源采用包含增益介质、调谐滤波器和延迟线组成的长腔激光谐振腔以及光功率增强单元. FDML扫频激光光源具有快速和高度稳定运转模式, 相位稳定性好. 基于法布里-珀罗调谐滤波器(fiber Fabry-Perot tunable filter, FFP-TF)的FDML扫频激光光源扫频范围为130 nm, 半高全宽为70 nm, 输出平均功率是11 mW. 与基于FFP-TF的短腔的扫频光源做了对比研究, FDML扫频光源速度从短腔的8 kHz提高到了48.12 kHz, 对应生物组织OCT成像轴向分辨率为7.8 μm, 比短腔的减小了1.9 μm. 关键词： 光学相干层析技术 扫频激光光源 傅里叶域锁模 法布里-珀罗调谐滤波器     

一种双光梳多外差大尺寸高精度绝对测距新方法的理论分析

本文提出了一种双光梳多外差大尺寸高精度绝对测距的新方法, 结合基于双光梳互相关的多外差距离测量和基于重复频率的梳间拍频距离测量, 在不需要依靠脉冲飞行时间先验判断以及扫描重复频率或扫描参考光路的前提下实现km量程高精度绝对测距. 文章在光梳基本原理和测距方案的基础上, 建立了基于双光梳的大尺寸距离测量链理论模型, 讨论了多外差最低谱线和光梳重复频率稳定度对测量结果的影响, 并进行了大量仿真计算; 仿真结果表明, 在理想相位解调精度的前提下, 该方法的测距误差优于± 50 pm, 且多外差最低谱线的频率偏差对测距造成的影响远低于多外差测量的测距分辨力, 验证了该方法能够用于开展大尺寸高精度绝对测距研究. 关键词： 激光测距 飞秒光梳 重复频率 多外差干涉     

激光场中极化势对电子-氦原子散射影响

构建含有极化势的静电屏蔽势和单纯的静电屏蔽势这两种原子势模型,应用第二玻恩近似（SBA）理论,分别对激光场中电子-氦原子散射截面进行了理论计算。对比实验结果发现含有极化势的静电屏蔽势给出的结果与实验符合较好。表明极化势在激光辅助电子-原子散射中起着重要作用。