343 nm飞秒激光制备微孔阵列以增强聚氨酯合成革透湿性

为了提高聚氨酯(PU)合成革透湿性,分别使用343 nm飞秒激光和作为对比的1030 nm飞秒激光及1064 nm纳秒激光制备微孔阵列。采用扫描电镜(SEM)和3D激光扫描显微镜对比研究了微孔形貌。结果表明,343 nm飞秒激光可以制备出效果最佳的微孔。此外,分析了3种激光与PU涂层的作用机理,揭示了343 nm飞秒激光合成革微钻孔过程仅表现为光化学烧蚀,光化学和光热烧蚀同时发生于1030 nm飞秒激光钻孔过程,而1064 nm纳秒激光只显示了光热烧蚀。激光合成革表面钻孔后,测量其透湿性和抗张力。结果显示: 微孔密度越大,皮革透湿性(WVP)越大而抗张力越低,脉冲重叠的增加会导致WVP的增加和抗张力的下降;同时,随着脉冲重叠从91.7%降到50%,微孔直径从45 μm降低到30 μm,而微孔锥度从0.7°增加到12.1°;当脉冲重叠率为91.7%,微孔密度为2550/cm²时,最大的WVP增长率为306%。     

Effects of multi-Schell beams on orbital angular momentum of entangled signal photons in low-order turbulence aberration channels

We model the detection and crosstalk probability of orbital angular momentum (OAM) states of the entangled signal photon in the Kolmogorov channels of the low-order turbulence aberrations and by the Rytov approximation. The results show that lower OAM mode number of signal photons and larger sub-beam number of multi-Gaussian Schell-model pump beam, the less susceptible of the detection probability of the signal photon to spatial coherence of source and turbulence aberrations is achieved. The maximum crosstalk probability is decrease as the decreasing of the sub-beam number of multi-Gaussian Schell-model. Enlarging OAM difference value or decreasing sub-beam number of multi-Gaussian Schell-model pump beam results in a lower crosstalk probability of the OAM of entangled signal photons.     

Research on speckle noise of laser Doppler velocimeter for the vehicle self-contained navigation

A novel multipoint layer-type laser Doppler velocimeter (MLLDV) is designed to measure the velocity of a vehicle for the self-contained navigation system. In order to investigate the speckle's influence on the Doppler spectrum, formulas of time-lagged covariance and speckle broadening were derived for our MLLDV. Simulations and experiments are made for detailed analysis. The results show that the time-lagged covariance of photocurrent is directly proportional to the incident angle, and is inversely proportional to the elevation fluctuation of the ground together with the velocity of the vehicle. Speckle broadening is a function of the vehicle's velocity, the 1/e² Gaussian spot radius and the phase correlation length of the ground. For our MLLDV, Doppler frequency and Doppler broadening are both directly proportional to the velocity of the vehicle. Besides, the ratio between Doppler broadening and the corresponding Doppler frequency is about 0.72% when the speed of the vehicle varies from 0 to 9.6 m/s.     

Line width analysis of a tunable optical filter based on free-space optics

The line width of a tunable optical filter based on free-space optics was analyzed. The relationship between the line width and the Gaussian beam waist was theoretically derived and experimentally verified. The experimental results meet the theoretical analysis well, which is beneficial for the design of a tunable optical filter based on free-space optics.     

Beam dynamics studies of the photo-injector in low-charge operation mode for the ERL test facility at IHEP

The energy recovery linac test facility （ERL-TF）, which is a compact ERL-FEL （free electron laser） two-purpose machine, was proposed at the Institute of High Energy Physics, Beijing. As one important component of the ERL-TF, the photo-injector that started with a photocathode direct-current gun has been designed. In this paper, optimization of the injector beam dynamics in low-charge operation mode is performed with iterative scans using Impact-T. In addition, the dependencies between the optimized beam quality and the initial offset at cathode and element parameters are, investigated. The tolerance of alignment and rotation errors is also analyzed.     

Neutron beam optimization based on a ^7Li（p,n）^7Be reaction for treatment of deep-seated brain tumors by BNCT

Neutron beam optimization for accelerator-based Boron Neutron Capture Therapy（BNCT） is investigated using a ^7Li（p,n）^7Be reaction. Design and optimization have been carried out for the target, cooling system,moderator, filter, reflector, and collimator to achieve a high flux of epithermal neutron and satisfy the IAEA criteria.Also, the performance of the designed beam in tissue is assessed by using a simulated Snyder head phantom. The results show that the optimization of the collimator and reflector is critical to finding the best neutron beam based on the ^7Li（p,n）^7Be reaction. Our designed beam has 2.49×109n/cm^2 s epithermal neutron flux and is suitable for BNCT of deep-seated brain tumors.     

基于自衍射效应的自参考光谱干涉方法的研究

研究一种基于非线性透明光学介质中的自衍射和自参考光谱干涉的新方法来进行飞秒激光脉冲测量. 实验中, 基于此新方法设计一种简单装置, 对800 nm 中心波长, 约40 fs 近无啁啾飞秒激光脉冲进行测量, 并与自参考光谱相干电场重建法测量结果进行比较, 得到了一致的结果. 此新方法与相应的装置结构简单, 可以对深紫外到中红外光谱范围的飞秒脉冲进行测量. 关键词： 飞秒激光脉冲 自参考光谱干涉 自衍射 脉冲测量     

基于LabVIEW的高分辨率光谱测试系统(英文)

提出了一种基于LabVIEW的无源器件光谱测试方案.通过LabVIEW编程控制可调谐激光器、可编程光滤波器、光功率计和数据采集平台,获得了具有不同传递函数的光谱特性.实验中激光器的扫描速度为10nm/s,扫描范围为10nm,数据采集卡的采样速率为1MS/s,结果表明:单个器件的光谱测试可以在1s内完成,光谱分辨率可达1pm;与利用宽带光源和光谱分析仪的传统光谱测试方法相比,所提方案的测试性能可达到传统方案水平,且能显示更精细的光谱细节.该方案能应用于有高分辨率、快速和高效要求的光谱测试中.     

谐振式集成光学陀螺解调特性分析

基于激光器频率谱检测技术,沿着光的传输方向分析了光波在谐振式集成光学陀螺系统中的传播,结合输入信号特征,建立频域内的数学模型,通过数值仿真和实验得到了调频检测系统下的解调曲线。按照光的传输方向：激光器、声光晶体移频器、光波导环形谐振器、探测器,利用贝塞尔函数展开和光场耦合模理论分析了谐振式集成光学陀螺解调特性,及其调频调制检测系统解调输出信号与谐振频率偏差之间的关系。通过数值计算,分析了解调曲线的变化规律,得到了施加在激光器压电陶瓷驱动器上调制波形的最佳调制系数。在实验上搭建了激光器频率调制解调技术系统,得到了解调曲线。数值仿真和实验结果表明,当调制系数M=2时,线性工作区间斜率最大,解调曲线最好。实测形状与理论分析结果相符,从解调信号得到±2×10³ rad/s的陀螺动态范围。     

宽频带激光自由空间传输的调制特性研究

基于惠更斯-菲涅耳衍射积分公式,研究了宽带光束在菲涅耳衍射区的自由空间传输特性,得到宽带光束传输的调制深度与光束带宽Δλ及菲涅耳数F的变化关系。结果表明:一定的带宽对光束的均匀性有适当的改善;当光束的带宽Δλ<2λ0/F时,带宽越大,光束越均匀;当带宽满足条件Δλ=2λ0/F时,菲涅耳衍射完全消失;在一定的菲涅耳数范围内,宽带光束的调制深度随菲涅耳数振荡变化,振荡曲线的主极大值和次极大值分别出现在菲涅耳数为奇数和偶数处,而极小值则出现在菲涅耳数F=2k±1/3(k=1,2,3,…)处,在极小值处光束的均匀性最好。