激光相位成像雷达的研究

利用无合作目标漫反射激光相位测距的原理,对关键单元技术进行分析和设计,研制成一种用于自主式车辆视觉导引的激光相位成像雷达的原理样机.     

激光等离子体能量角分布及吸收定标律

主要研究激光平面靶等离子体发射能量角分布及吸收定标律。实验利用高斯型1.06μm激光脉冲,其能量为2～50J,脉冲宽度为0.3～2.2ns,靶面平均辐照强度为1.8×1013～1.1x10~(15)W/cm~2,光束以25°角入射。实验采用了Au、Ag、Ti、Al和C_8H_8等厚靶。用等离子体卡计测量靶面吸收的激光能量。用指数函数拟合实验数据,给出了吸收效率分别作为激光强度、脉冲宽度和靶材料原子序数的函数的定标关系式。这些关系式定性地与逆轫致吸收的理论关系式相一致。     

远红外契伦柯夫FEL的动力学理论

契伦柯夫自由电子激光可以产生远红外相干受激辐射。本文建立了契伦柯夫自由电子激光的动力学理论并详细研究了初始信号频率,电子束电压和束—介质膜间隙对器件性能的影响。与自由电子激光,回旋自谐振脉塞比较,指出了短波契伦柯夫自由电子激光的几个显著特点。     

激光增益系数ζ(ν)和佛克脱函数的近似积分计算—兼论δ函数在近似计算中的应用

本文分析了激光增益系数ζ(υ)和佛克脱积分函数I(υ,υ_0).指出两函数的积分困难均来源于洛伦兹分布函数和多普勒分布函数的褶积.文中进一步分析了洛伦兹函数φ_N和多普勒函数φ_D,并引出函数的峰宽比α,指出当峰宽比α_N>>α_D时,可以把积分号内的φ_N当作δ函数来处理.反之也然.这样就很容易得到ζ(υ)和I(υ,υ_0)的近似积分.     

军用光电侦察装备的发展

本文简要介绍了军用光电侦察装备在现代军事侦察中的作用和地位,几种主要军用光电侦察装备的发展趋势,提出了应该采取的技术对策和重点研究的课题。     

Amplification of spontaneous emission in Nd~(3 )-doped fiber pumped by Ti: Al_2O_3 tunable laser

Amplification of spontaneous emission(ASE) in 4m Nd~(3 )-doped fiber pumped by Ti : Al~2O_3 tunable laser is studied theoretically and experimentally. The output of 2.64mW from ASE source pumped at 833 nm is obtained and the experimental results of ASE source are compared with that of Nd~(3 )-doped fiber ring laser.     

Diagnosis of phasma in CCD damage process induced by laser

In this paper, the shapes of plasma produced by a Q-switched YAG laser acted repeatedly upon a CCD with MOS structure are used, to investigate the destroying process of the optoelectronic device. The experimental results of CCD destroyed by a 1.06μm laser beam with a pulse width of 15 ns are given.     

Structure and properties of laser quenched 4Cr13 steel

The structure and properties of laser quenched 4Cr13 steel were reported. The results show that: (1) Fine martensite is obtained after laser quenching. The highest content of retained austenite in the surface area 10 μm thick of laser hardened zone is 47. 13 percent, but only 3.6 percent of retained austenite is measured inside the laser hardened layer after the surface layer 10μm thick is worn off. (2) The hardness of laser quenched layer is much higher (HV_(0.1) 690) than that of the substrate (HV_(0.1) 237). (3) The wear resistance of laser quenched layer is 3.3 times higher than that of traditionally treated specimen and the corrosion resistance of 4Cr13 steel is also improved greatly by laser quenching.     

Charateristics of a helical axial flow CO_2 laser

A novel CO_2 laser tube which forms a helical axial gas flow is designed. The influences of such a flow on the output laser beam is discussed.     

GaAs体材料及其量子阱的光学极化退相特性

采用飞秒时间分辨瞬态简并四波混频技术，在室温下测量了GaAs体材料及其量子阱材料GaAs/Al_0.3Ga_0.7As的光学极化超快退相时间，当激光中心波长为785nm，受激载流子浓度为10¹¹cm^-2时，它们的退相时间分别为28fs和46fs.量子阱材料的退相时间比体材料的长，这是由于量子阱中的载流子在垂直于GaAs/AlGaAs界面的运动受到限制，运动呈现二维特性，大大减小了载流子的散射概率.实验中观察到瞬态简并四波混 关键词： 时间分辨简并四波混频 飞秒激光脉冲 退相 密度矩阵