5 TW/40 fs级台式钛宝石激光系统研究

在TSA-25系统输出35 mJ,800 nm啁啾脉冲的基础上,建立了以钛宝石作为增益介质的二级啁啾脉冲放大(CPA)系统。使用0.6 J和1.6 J,532 nm,10 Hz Nd∶YAG激光抽运,输出脉冲能量达到500 mJ,经压缩脉冲宽度为41 fs,压缩器的能量转换效率为63%,峰值功率可达7.6 TW。通过对放大器系统的钛宝石晶体、抽运密度以及多通结构通道数的选择等实验,有效地提高了能量放大器的萃取效率。其主放大器能量萃取效率达到32%,整个系统占用尺寸不到10 m2。     

一种新型温度自补偿高灵敏度折射率计

基于高频CO2激光脉冲写入的新型超长周期光纤光栅(ULPFG),提出了一种可实现温度自补偿的新型高灵敏度折射率计。理论与实验表明,新型超长周期光纤光栅不同闪耀阶次谐振峰对外界折射率与温度变化的灵敏度各自不同,特别的是,该光栅存在对外界折变不敏感的谐振峰,测量中除了可以利用该峰实现温度同时测量外,还可以补偿另一个测量折变的谐振峰因温度变化带来的测量误差。该折射率计具有制作简单、成本低、强度好,灵敏度高等优点,当外界折射率在1.43~1.45范围内变化时,其折射率测量灵敏度可达每单位折射率240 nm,在实际工业应用中具有较大的潜在实用价值。     

Laser-induced damage of Ta2O5/SiO2 narrow-band interference filters under different 1064 nm Nd:YAG laser modes

The laser-induced damage (LID) behavior of narrow-band interference filters was investigated with a Nd:YAG laser at 1064 nm under single-pulse mode and free-running mode. The absorption measurement of such coatings was performed with surface thermal lensing (STL) technique. The damage morphologies under the two different laser modes were also studied in detail. It was found that all the filters exhibited a pass-band-center-dependent absorption and laser-induced damage threshold (LIDT) behavior, but the damage morphologies were diverse. The explanation was given with the analysis of the electric field distribution and the operational behavior of the irradiation laser.     

Influence of the bias current on the output characteristics of a mode-locked fiber ring laser consisting of two SOAs

In this paper, after obtaining the mode-locked pulse shape with self-reproduction theory, the influence of the bias current on the output characteristics of a backward-optical-injection harmonic mode-locked fiber ring laser consisting of two semiconductor optical amplifiers (SOAs) has been numerically investigated. The results show that the mode-locked pulse with high peak power and narrow width can be obtained through reasonably adjusting the bias currents of the two SOAs.     

Trace Detection of Low Concentrations of Ozone Using a CO<Subscript>2</Subscript> Laser with Automatic Tuning over the Spectrum

A technique of detection of ozone, using a CO₂ laser with rapid automated tuning over 8–10 generation lines in the 9.4–9.6-µm spectral range, has been developed. Its experimental verification has shown a higher accuracy of detecting low concentrations of O₃ in comparison with the traditional technique of differential absorption on two lines (on-line and off-line). Using the technique suggested, the content of ozone in the vicinity of city roads with heavy traffic has been measured.__________Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 72, No. 2, pp. 251–255, March–April, 2005.     

硅单粒子位移损伤多尺度模拟研究

本文结合分子动力学方法和动力学蒙特卡罗方法, 研究了单个粒子入射硅引起的位移损伤缺陷的产生和演化过程; 基于Shockley-Read-Hall理论计算了单个粒子入射引起的位移损伤缺陷导致的泄漏电流增加及其演化过程, 比较了缺陷退火因子与泄漏电流退火因子之间的差异, 并将计算结果与实验值进行了对比. 结果表明, 计算泄漏电流时, 仅考虑一种缺陷的情况下缺陷退火因子与泄漏电流退火因子相同, 考虑两种缺陷类型情况下二者在数值上有所区别, 但缺陷退火因子仍能在一定程度上反映泄漏电流的退火行为. 分子动力学模拟中采用Stillinger-Weber势函数和Tersoff势函数时缺陷退火因子和泄漏电流退火因子与实验结果一致, 基于Stillinger-Weber势函数的计算结果与实验值更为接近.     

Design of LD in-band direct-pumping side surface polished micro-rod Nd:YVO_4 laser

To diminish the thermal load, two ways, that is, in-band direct pumping and micro-rod crystal, could be adopted at the same time. The efficiency of LD in-band direct-pumping side surface polished micro-rod Nd:YVO_4 laser is numerically analyzed. By optimizing parameters such as crystal length, laser mode radius, pump beam radius, doping concentration and crystal cross-section size, the overall efficiency can reach over 50%. It is found that with micro-rod crystal implemented in the laser oscillator, high overall efficiency LD in-band direct-pumping Nd:YVO_4 laser could be realized. High efficiency combined with low thermal load makes this laser an outstanding scheme for building high-power Nd:YVO_4 lasers.     

Filamentation instability in two counter-streaming laser plasmas

The filamentation instability was observed in the interaction of two counter-streaming laser ablated plasma flows,which were supersonic, collisionless, and also closely relevant to astrophysical conditions. The plasma flows were created by irradiating a pair of oppositely standing plastic(CH) foils with 1ns-pulsed laser beams of total energy of 1.7 k J in two laser spots. With characteristics diagnosed in experiments, the calculated features of Weibel-type filaments are in good agreement with measurements.     

High-speed and crack-free direct-writing of microchannels on glass by an IR femtosecond laser

Fabrication of high-resolution 3D structures with laser radiation on the surface of brittle materials has always been a challenging task. Even with femtosecond laser machining, micro-cracks and edge chipping occur. In order to evaluate processing modes optimal both in quality and productivity, we investigated high-speed (50 kHz) femtosecond laser processing of BK7 glass with the use of design of experiments and regression analysis. An automated inspection technique was developed to extract quality characteristics of test-objects. A regression model was obtained appropriate to fabricate microchannels with a predefined depth in the range of 1–30 µm with average accuracy of 5%. It was found that high quality machining modes are in the range of 0.91–2.27 µJ energy pulses, overlap of 53–62%, three and more number of passes. A material removal rate higher than 0.3 mm³/min was reached and microfluidic structures were formed based on data obtained.     

具有空间重叠性和时间同步性的双波长TEA CO2激光器研究

提出了一种改进的双波长TEA CO2激光器,不仅具有良好的空间重叠性,而且具有比较理想的时间同步性.该激光器由两个空间上部分重叠的光栅和一个锗镜构成光栅-平面腔,两个光栅前后放置,相互利用,共同建立双频振荡,由锗镜输出双波长激光.通过改变两光栅的有效面积,对两输出脉冲空间重叠性进行调节;通过改变两光栅的角度形成的失谐缩小输出脉冲的时间间隔,达到时间同步性.实验表明,可以在空间重叠性的基础上使两输出脉冲的时间间隔由1 000 ns调整到200 ns.