Toward low‐noise synthetic turbulent inflow conditions for aeroacoustic calculations

The accuracy of boundary conditions for computational aeroacoustics is a well‐known challenge, due in part to the necessity of truncating the flow domain and replacing the analytical boundary conditions at infinity with numerical boundary conditions. In particular, the inflow boundary condition involving turbulent velocity or scalar fields is likely to introduce spurious waves into the domain, therefore degrading the flow behavior and deteriorating the physical acoustic waves. In this work, a method to generate low‐noise, divergence‐free, synthetic turbulence for inflow boundary conditions is proposed. It relies on the classical view of turbulence as a superposition of random eddies convected with the mean flow. Within the proposed model, the vector potential and the requirement that the individual eddies must satisfy the linearized momentum equations about the mean flow are used. The model is tested using isolated eddies convected through the inflow boundary and an experimental benchmark data for spatially decaying isotropic turbulence. Copyright © 2013 John Wiley & Sons, Ltd.     

Redox switchable ligands suitable for transition metal ions: Protonation,complexation and electrochemical properties of a ferrocene-modified tetraamine diketone and its saturated analogue

Abstract

The new ferrocene-containing water-soluble ligands 1 and 2 were synthesized and their protonation and complexation properties toward Ni^II and Cu^II studied as a function of pH, by means of potentiometric titration experiments. Electrochemical measurements were performed in aqueous solution on pure 1 and 2 and in the presence of Ni^II and Cu^II cations, in the pH range 2–12, allowing us to determine the redox potential values relative to the ferrocene oxidation in the free ligands and in their Ni^II and Cu^II complexes. 1 and 2 behave as redox switchable ligands, the former enhancing, the latter decreasing its binding ability upon oxidation of the appended ferrocene function. Besides, the Cu^II complex of ligand 1 and the Ni^II complex of ligand 2 behave as two-centre two-electron redox systems, the complexed metal cation being subject to further oxidation to M^III.     

Strategic measures in optimal control problems for stochastic sequences

Controlled discrete–time stochastic processes axe studied using the convex–analytic approach. Some new properties of strategic measures spaces are established, particular Markov models are considered. The meaningful example is presented.     

Residual‐based artificial viscosity for simulation of turbulent compressible flow using adaptive finite element methods

In this paper, we present a finite element method with a residual‐based artificial viscosity for simulation of turbulent compressible flow, with adaptive mesh refinement based on a posteriori error estimation with sensitivity information from an associated dual problem. The artificial viscosity acts as a numerical stabilization, as shock capturing, and as turbulence capturing for large eddy simulation of turbulent flow. The adaptive method resolves parts of the flow indicated by the a posteriori error estimates but leaves shocks and turbulence under‐resolved in a large eddy simulation. The method is tested for examples in 2D and 3D and is validated against experimental data. Copyright © 2012 John Wiley & Sons, Ltd.     

Lattice Boltzmann simulation of two-sided lid-driven flow in a staggered cavity

In this article, the lattice Boltzmann method is employed in order to explore incompressible fluid flow inside a two-sided lid-driven staggered cavity. Results of the lattice Boltzmann simulation for antiparallel motion of lids are compared with the data from existing literature. For parallel motion of lids, the characteristics of flow pattern for a variety of Re numbers (50–3200) are presented. An asymmetric steady-state flow pattern for parallel motion of lids is obtained.     

Influence of floating-ring-electrode on large-aperture liquid crystal lens

Large-aperture liquid crystal (LALC) lens with hole-patterned electrodes possesses small lens power and high addressing voltage because of the thick dielectric layer inserted between the hole-patterned electrode and LC layer. With an embedded narrow floating ring electrode (FRE), the lens power and addressing voltage of the LALC lens could be effectively increased and decreased, respectively. In this study, we analyse the electro-optic performance of LALC lens upon variation of the diameter of the embedded FRE. Results reveal that the FRE diameter determines the electric-field distribution and hence the electro-optic behaviour of the LALC lens. The LALC lens with embedded 2-mm-diameter FRE has excellent lens properties, such as low aberration, high focal quality and modulation transfer function performance comparable with solid glass lens.     

On the limitation of the van der Waals-Platteeuw-based thermodynamic models for hydrates with multiple occupancy of cavities

Thermodynamic models based on the van der Waals–Platteeuw statistical theory (Adv. Chem. Phys. 2, 1 (1959)) can be very accurate in describing hydrate equilibrium conditions, even for some occasions when multiple cavity occupancy occurs. These are cases outside the range of assumptions used for the development of the original statistical theory. However, during multiple cavity occupancy such models can perform poorly when calculating the cavity occupancies. This paper reports novel Grand Canonical Monte Carlo molecular simulations for the case of pure structure II N₂ hydrate and compares the calculated cavity occupancies with experimental data and observe reasonable agreement. Also examined are the van der Waals–Platteeuw-based modifications that retained the single-occupancy assumption of the original theory and how they perform when predicting cavity occupancies and hydrate equilibrium pressures.     

An immersed boundary method wall model for high‐Reynolds‐number channel flow over complex topography

High‐Reynolds‐number channel flows regularly encounter topographies composed of multiple length scales and that protrude into the boundary layer. Physically, the presence of immersed obstacles leads to increased velocity gradients, turbulence production, and manifestation of wakes. Considerable challenges are associated with numerically describing the presence of obstacles in channel flows. Common approaches include generation of a computational mesh that is uniquely designed for the flow and obstacle, the immersed boundary method, and terrain‐following coordinates. There are challenges and limitations associated with each of these techniques. Specification of boundary conditions representing the perimeter of solid obstacles is a primary challenge of the immersed boundary method. In this document, a simplistic canopy stress‐like wall model is used to impose boundary conditions. The model isolates aerodynamically relevant local frontal areas through evaluation of the gradient of the topographic height field. The gradient of the height field describes both the surface‐normal direction and the frontal area, making it ideal for detecting areas on which the flow impinges. The model is tested in numerical simulations of turbulent half‐channel flow over topographies with different obstacles affixed–right prisms, rectangular prisms, ellipsoidal mounds, and sinusoids. In all cases, the performance is strong relative to datasets presented in the literature. Results are finally presented for numerical simulation of flow over complex synthetic fractal‐like topography and a synthetic city. These results show interesting trends in how the turbulent multiscale flow field responds to multiscale topography. Copyright © 2012 John Wiley & Sons, Ltd.     

Book reviews

This work is a thorough investigation on the major operating parameters of the programmable temperature vaporisation (PTV) inlet used for gas chromatographic injection, including injection mode and volume, inlet temperature, vent and purge flow rates. The results clearly demonstrate the advantage of large volume injection in enhancing the detection of polybrominated diphenyl ethers (PBDEs). Partial loss of injected PBDEs occurred during solvent venting and due to incomplete sample transfer. Such loss was minimised by lowering the initial inlet temperature and vent flow and elevating the final inlet temperature. The results show that 50 mL/min vent flow, as low as 0°C initial and higher than 300°C final inlet temperatures produced the relatively high responses. Two mass spectrometric parameters were also evaluated. Indoor dust, lake sediment and human placenta tissue samples were analysed to demonstrate reliability and sensitivity improvement of the PTV large volume injection.     

Group divisible 3‐designs with block size four and group type 1ns1

In this article, we mainly consider the existence problem of a group divisible design GDD $\left(3,4,n+s\right)$ of type $1^n{s}^1$. We present two recursive constructions for this configuration using candelabra systems and construct explicitly a few small examples admitting given automorphism groups. As an application, several new infinite classes of GDD $\left(3,4,n+s\right)$s of type $1^n{s}^1$ are produced. Meanwhile a few new infinite families on candelabra quadruple systems with group sizes being odd and stem size greater than one are also obtained.