Effects of Calcination on the Physical and Photocatalytic Properties of TiO<Subscript>2</Subscript> Powders Prepared by Sol–Gel Template Method

TiO₂ powders were prepared by sol–gel template method and calcined under different conditions. XRD, BET and TEM were used to characterize the TiO₂ powders obtained. The photocatalytic activity of TiO₂ was investigated by the degradation of methyl orange. It was found that TiO₂ powder has the highest photocatalytic activity at a calcination temperature of 673 K. The effects of physical properties such as surface area, crystallinity and crystal phase on the photocatalytic activity of TiO₂ were discussed.     

USING MEASURING METHOD TO FIND AREA OF ENCLOSED PLANE REGION AND VOLUME OF ENCLOSED SPACE REGION

Two simple methods to calculate the area and volume called improved square gridmethod and cube cutting method are proposed in this paper. For any plane curve orspace surface satisfying certain conditions, by our method, the error of measurement isof the second infinitive order of measuring unit (the side length of the square grid or theside length of the little cube) when the unit is small enough. And when some properties ofthe curve or the surface can be found or its varying bounds can be evaluated, it is pointedout, in order to make the error smaller than any given value, how small the length of themeasuring unit should be.     

制备高比表面积碳化硅的几种影响因素

采用溶胶凝胶法，以蔗糖和正硅酸乙酯(TEOS)为原料，草酸为TEOS水解的催化剂，制备均相碳化硅前驱体，在氩气氛和高温条件下(1 350～1 600 ℃)将碳化硅先驱体进行碳热还原，制备出高比表面积的SiC。考察了水/TEOS物质的量的比、碳/硅物质的量的比及镍盐等因素对碳化硅比表面积的影响。结果表明，当n_water/n_TEOS=7.5，n_C/n_Si=4时，适宜的镍催化剂(n_Ni/n_TEOS=0.005)，凝胶形成的时间最短，镍盐的加入可使碳热还原温度降低200 ℃。     

Three-dimensional structural features and the toxicity of aminobenzenes and phenols

There are many organic pollutants in the environment, such as polychlorinated biphenyl, polycyclic aromatic hydrocarbons, dichlorodiphenyl-trichloroethane (DDT), and polychlorinated naphthalene. These organic pollutants are persistent,liposoluble and easily cumulated in organism; consequently, the potential toxicity will be high. Risk assessment of industrial chemicals is currently carried out using scanty experimental data, because many of these chemicals have very little or no test data. S…     

Classification of cultivation area of ginseng by near infrared spectroscopy and ICP-AES

A rapid and nondestructive near infrared (NIR) method using soft independent modeling of class analogy (SIMCA) for the classification of cultivation area (Korea and China) was evaluated and confirmed. Raw, first, and second derivative NIR spectra were compared to develop a robust classification rule. The chemical properties of ginseng samples were also investigated to find out the differences between Korean samples and Chinese samples. These differences make NIR spectroscopic method viable. The average value of each Korean and Chinese ginseng sample for crude fiber, crude protein, starch, and 10 inorganic constituents were measured and compared with F-test and t-test. The inorganic constituents were also measured by induced coupled plasma-atomic emission spectroscopy (ICP-AES). It could be found that the amount of starch and ten inorganic elements for example Na, Mg, P, K, Ca, Mn, Fe, Ni, Cu and Zn in ginseng samples are considerably different based on cultivation area. SIMCA has been applied to the inorganic data to investigate the possibility of ICP-AES as classification tool. However, it was observed that the result was not equal to than NIR spectra data. The overall results showed the availability of NIR method using SIMCA would be adequate for classification of cultivation of ginseng, since NIR spectra includes useful and various information on chemical properties in spite of broad and overlapped bands.     

Oxidation kinetics of timahdit and tarfaya moroccan oil shales

Organic matter evolution and kinetics of combustion of Tarfaya and Timahdit oil shales have been examined by thermogravimetry (TG) and by differential thermal analysis (DTA). An agreement is observed between both techniques where it was found that combustion of organic matter occurs in two steps. Kissinger's method applied on experimental results gives an activation energy of the same magnitude for the first step of both oil shales (103 kJ mol^–1) whereas the second is 148 kJ mol^–1 for Timahdit and 118 kJ mol^–1 for Tarfaya.The changes in specific surface area during thermal combustion of Timahdit and Tarfaya oil shales have been studied by thermogravimetric gas sorption balance and correlated with experimental results obtained on TG/DTA in air. For Timahdit oil shale oxidation products, specific surface areas calculated from nitrogen adsorption data shows a slight increase during the temperature domain of 280 to 430°C and after this temperature, they increase sharply. However, data obtained with Tarfaya oil shales shows a significant increase at the temperature of maximum oxidation of the first stage of combustion of organic matter.This revised version was published online in November 2005 with corrections to the Cover Date.     

Monodisperse chloromethyl-functionalized macroporous polymer particles by seeded polymerization in aqueous media

This study presents a method to produce monodisperse chloromethyl-functionalized macroporous poly(styrene-co-divinylbenzene) polymer particles by seeded polymerization in aqueous media. We observed that the molecular structure of polystyrene seed particles, the composition of the secondary monomer mixtures, and the type of solvents were very important factors that determine the morphology and porosity of the final particles. This study proposes that the molecular chemistry of polystyrene seed polymers, increasing molecular weight or crosslinking, is another factor that can control the porosity of the final particles. Also, the selection of a poor solvent was effective in forming the larger surface area. In this study, it was confirmed that the chloromethyl groups introduced on the surface of porous particles were quantified chemically and their effective incorporation had a close relationship with the surface area.     

Biotechnological storage and utilization of entrapped solar energy

Our laboratory has recently developed a device employing immobilized F₀F₁ adenosine triphosphatase (ATPase) that allows synthesis of adenosine triphosphate (ATP) from adenosine 5′-diphosphate and inorganic phosphate using solar energy. We present estimates of total solar energy received by Earth’s land area and demonstrate that its efficient capture may allow conversion of solar energy and storage into bonds of biochemicals using devices harboring either immobilized ATPase or NADH dehydrogenase. Capture and storage of solar energy into biochemicals may also enable fixation of CO₂ emanating from polluting units. The cofactors ATP and NADH synthesized using solar energy could be used for regeneration of acceptor d-ribulose-1,5-bisphosphate from 3-phosphoglycerate formed during CO₂ fixation.     

Effect of Inorganic Ions on Oleate Adsorption at a Nigerian Hematite–Water Interface

Using “pure” natural hematite selected from a high silica Nigerian hematitic ore, oleate adsorption densities at the hematite–water interface were determined in the presence of various inorganic ions (anions and cations) of different charges and at varying concentrations. Adsorption density was determined using electrical conductivity measurements. The specific surface area of the hematite particles was determined using the method of adsorption of paranitrophenol in aqueous solution. Inorganic ions in solution depressed oleate adsorption at the aqueous hematite surface. The charge of the ion proved to be the dominant factor determining the depression of oleate adsorption. Ionic strength also was an influence, up to a limiting value at which monolayer oleate coverage of the hematite surface occurred. The inorganic ions in solution are considered to function through nonspecific adsorption in the diffuse region of the electric double layer.