Fabrication and magnetic property analysis of monodisperse manganese-zinc ferrite nanospheres

Monodisperse Mn-Zn ferrite (Mn_1−xZn_xFe₂O₄) nanospheres have been prepared via a simple solvothermal method. The as-synthesized samples were characterized in detail by X-ray diffraction pattern (XRD), transmission electron microscope (TEM), high-solution transmission electron microscope (HRTEM), select area electron diffraction pattern (SAED), scanning electron microscope (SEM), and vibrating sample magnetometer (VSM). The results show that a large number of the high-purity Mn_1−xZn_xFe₂O₄ nanocrystallites were synthesized and these nanocrystallites oriented aggregated to nanospheres. The dependence of magnetic properties of Mn_1−xZn_xFe₂O₄ nanospheres on the composition content x of Zn was studied. The maximum saturation magnetization value of the as-prepared sample (Mn_0.6Zn_0.4Fe₂O₄) reached 52.4 emu g⁻¹.     

Temperature‐dependent Raman scattering studies of polycrystalline BiFeO3 bulk ceramics

This work reports the temperature‐dependent Raman scattering study of mutiferroic BiFeO₃ (BFO) bulk ceramics in a wide temperature range of 93–843 K. The polycrystalline samples are sintered at four different temperatures and characterized by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), vibrating sample magnetometry, differential scanning calorimetry (DSC), and optical microscopy. The microstructure shows remarkable changes in terms of grain size and domain pattern as the sintering temperature increases. The DSC curves show prominent exothermic peaks at 645 K, the antiferromagnetic–paramagnetic phase transition temperature. The Raman spectra of all the four specimens reveal strong anomalies in the vicinity of the Neel temperature, which can be attributed to the multiferroic nature of BFO. The Raman scattering studies also reveal considerable spectral changes at a temperature range of 140–200 K in all the specimens, which can be inferred to a further spin–reorientation transition exhibited in BFO at a cryogenic temperature. Copyright © 2008 John Wiley & Sons, Ltd.     

Studies on the preparation and ethanol gas sensing properties of spinel Zn0.6Mn0.4Fe2O4 nanomaterials

Zn_1−xMn_xFe₂O₄ (x = 0, 0.2 and 0.4) nanomaterials were synthesized by sol–gel citrate method and studied structural and gas sensing properties. The structural characteristics of synthesized nanomaterials were studied by X-ray diffraction measurement (XRD) and transmission electron microscope (TEM). The results revealed that the particle size is in the range of 30–35 nm for Mn–Zn ferrite with good crystallinity. The gas sensing properties were studied towards reducing gases like LPG, CH_4, CO and ethanol and it is observed that Mn–Zn ferrite shows high response to ethanol at relatively lower operating temperature. The Zn_0.6Mn_0.4Fe₂O₄ nanomaterial shows better sensitivity towards ethanol at an operating temperature 300 °C. Incorporation of 1.5 wt.% Pd improved the sensitivity, selectivity, response time and reduced the operating temperature from 300 °C to 230 °C for ethanol sensor. The response time of 200 ppm ethanol in air is about 10s.     

Fabrication and magnetic properties of Ni0.50.5Zn0.5Fe2O4 nanofibres by electrospinning

NiZn ferrite/polyvinylpyrrolidone composite fibres were prepared by sol–gel assisted electrospinning.Ni0.5Zn0.5Fe2O4 nanofibres with a pure cubic spinel structure were obtained subsequently by calcination of the composite fibres at high temperatures.This paper investigates the thermal decomposition process,structures and morphologies of the electrospun composite fibres and the calcined Ni0.5Zn0.5Fe2O4 nanofibres at different temperatures by thermogravimetric and differential thermal analysis,x-ray diffraction,Fourier transform infrared spectroscopy and field emission scanning electron microscopy.The magnetic behaviour of the resultant nanofibres was studied by a vibrating sample magnetometer.It is found that the grain sizes of the nanofibres increase significantly and the nanofibre morphology gradually transforms from a porous structure to a necklace-like nanostructure with the increase of calcination temperature.The Ni0.5Zn0.5Fe2O4 nanofibres obtained at 1000 C for 2 h are characterized by a necklace-like morphology and diameters of 100–200 nm.The saturation magnetization of the random Ni0.5Zn0.5Fe2O4 nanofibres increases from 46.5 to 90.2 emu/g when the calcination temperature increases from 450 to 1000 C.The coercivity reaches a maximum value of 11.0 kA/m at a calcination temperature of 600 C.Due to the shape anisotropy,the aligned Ni0.5Zn0.5Fe2O4 nanofibres exhibit an obvious magnetic anisotropy and the ease magnetizing direction is parallel to the nanofibre axis.     

Introducing ZrFe2O5 nanopowders for hyperthermia applications

The present paper was written with the aim of synthesizing zirconium ferrite nanopowders and evaluating its magnetic hyperthermia properties. A mechanical milling process along with a sintering process were conduct on the raw powders to prepare zirconium ferrite nanopowders. X-ray diffraction results confirmed a pure product and the VSM tools, showed a single domain state for the powders with a size less than 35?nm. Analysis of the samples under AC magnetic field demonstrated that mono-disperse nanoparticles met a higher value of the specific absorption rate (SAR) in comparison with multi-disperse one. Besides, according to the linear response theory the ratio of the anisotropy energy to the thermal one, as a dimensionless anisotropy parameter (σ), has a key role in the SAR values of zirconium ferrite nanopowders.     

基于铁氧体基板的开口谐振环的可调微波左手特性研究

利用铁氧体的外场调制特性,提出采用铁氧体作为金属环线结构的介质基板,实现频率可调左手材料. 首先采用时域差分有限元方法数值模拟了基板材料参数变化的条件下,开口谐振环的频率可调性规律. 随基板材料的介电常数或磁导率升高,与开口谐振环负磁导率对应的透射谷频率将显著降低. 实验制备了一系列超高频软磁六角铁氧体,利用外加磁场有效调制了其磁导率. 并通过实验表明,通过调控外加磁场可以有效地调控开口谐振环负磁导率对应的透射谷频率. 关键词： 左手材料 开口谐振环 铁氧体 可调     

LaAl1-xFexO3/Al2O3/FeCrAl催化剂的制备及其对甲烷燃烧的催化性能

 以FeCrAl合金薄片为载体,以LaAl1-xFexO3为活性组分,以Al2O3为过渡层,制备了LaAl1-xFexO3/Al2O3/FeCrAl金属基整体式催化剂,并用XRD和SEM等方法对催化剂的物相和形貌进行了表征,对催化剂上甲烷催化燃烧活性进行了评价. 结果表明,催化剂物相中有LaAl1-xFexO3型钙钛矿及 α-Al2O3 和 γ-Al2O3; 催化剂的颗粒小于2 μm, 并且颗粒的尺寸及形貌与LaAl1-xFexO3中的Fe/Al摩尔比有关; 催化剂样品对甲烷催化燃烧活性的大小顺序为LaAl0.3Fe0.7O3/Al2O3/FeCrAl＞LaFeO3/Al2O3/FeCrAl＞LaAl0.5Fe0.5O3/Al2O3/FeCrAl＞LaAl0.7Fe0.3O3/Al2O3/FeCrAl＞LaAlO3/Al2O3/FeCrAl.     

Effects of Sm substitution on ferroelectric domains and conductivity in bismuth ferrite ceramics

The large piezoelectric coefficient and multiferroicity of bismuth ferrite (BFO) make it an attractive candidate for lead-free ferroelectric devices. However, large leakage currents have limited broader applications. Rare-earth substitutions in BFO have been shown to improve ferroelectric and magnetic properties. In this work, we employed piezoresponse and conductive atomic force microscopy to study ferroelectric domains in Bi_1-xSm_xFeO₃ (x = 0–0.150) grown by the co-precipitation method. The combined piezoresponse and conductivity measurements can directly visualize the local ferroelectric domains under different sample bias. At Sm mol% > 7.5, Sm-substitution effectively lowers defect-generated conductivity. At Sm mol% < 7.5, conductivity increases due to conductive domain walls inside sample grains. The surfaces of these conductive samples exhibit a p-type rectifying behavior while the bulk is n-type. Our work details how the local piezoelectric properties and transport behaviors of BFO ceramics change as a function of Sm-substitution.     

A new lanthanum coordination polymer built from a semi‐rigid tripodal carboxylic acid ligand: synthesis,crystal structure and properties

By employing the semi‐rigid multidentate carboxylic acid ligand 4,4′,4′′‐{[(2,4,6‐trimethylbenzene‐1,3,5‐triyl)tris(methylene)]tris(oxy)}tribenzoic acid (denoted H₃L), a new lanthanum coordination polymer, namely poly[[bis(dimethylformamide)(μ₆‐4,4′,4′′‐{[(2,4,6‐trimethylbenzene‐1,3,5‐triyl)tris(methylene)]tris(oxy)}tribenzoato)lanthanum(III)] dimethylformamide tetrasolvate 0.25‐hydrate], {[La(C₃₃H₂₇O₉)(C₃H₇NO)₂]·4C₃H₇NO·0.25H₂O}_n or {[La(L)(DMF)₂]·4(DMF)·0.25(H₂O)}_n (DMF is dimethylformamide) ( 1 ), was prepared and characterized by single‐crystal X‐ray diffraction, elemental analysis, thermogravimetric analysis, IR spectroscopy and photoluminescence studies. The asymmetric unit contains one La^III cation, one anionic L^3? ligand, two coordinated DMF molecules, four free DMF molecules and one‐quarter of a free water molecule. Compound 1 possesses (3,6)‐connected two‐dimensional kgd topology sheets consisting of secondary building units of La₂ clusters and L^3? ligands, which further stack into three‐dimensional supramolecular networks through π–π interactions. Compound 1 exhibits a photoluminescence emission at room temperature, with a peak at 410 nm, owing to a ligand‐centred excited state.     

Reorientational dynamics of p-sulfonatocalix[4]arene and of its La(III) complex in water

The reorientational dynamics of p-sulfonatocalix[4]arene and of its La(III) complex in deuterated water were studied by 1H NMR longitudinal relaxation rates. It is shown that the relaxation is purely dipolar in the non-extreme narrowing regime. The distance between the geminal protons could be determined from the NMR data, giving good agreement with the values generally used in correlation time calculations. The correlation times show an Arrhenius behaviour in good agreement with previously reported data from 13C measurements for a similar uncomplexed calixarene. The Arrhenius energies of activation are identical for the uncomplexed and the complexed calixarenes, suggesting a reorientational motion strongly dependent on the structure of the water cage around the complex. This is also in agreement with a complexation of the La(III) cation in the second sphere of solvation of the sulfonate groups, as shown by molecular dynamics simulations.